结构材料中的剪切应力和弯曲应力的计算稍后处理。
The calculations of shearing and bending stresses in the material of the structure will be dealt with later.
但在有关凸轮的教科书中，对接触应力的计算过程论述较少。
But in the textbook about CAM, the contact stress calculating process is seldom discussed.
主要讨论了影响自动扶梯主轮受力的因素及主轮应力的计算。
This article mainly discusses the force factors affecting on the escalator driver and its stress calculation.
并把此条件下得到的力学特性参数用于冰温度膨胀应力的计算。
Also the ice mechanics parameters obtained under such conditions are employed to calculate ice thermal expansion stress.
针对表面残余应力的计算也证实了表面加工变质层的有效去除。
The demonstrated decrease of surface residual stresses testifies the removal of the former deformation layer.
提出了有斜裂缝梁内的混凝土承受的剪力和箍筋应力的计算方法。
The method for calculating the shear carried by the concrete and the stirrup stress in beams with inclined cracks are suggested in the paper.
本文简述了淀积于基片上的薄膜中的应力的计算理论的演变过程。
In this paper, the developmental process of the calculating theory of the stress in thin films on the same substrate is described briefly.
首次尝试将随机有限元法引入大体积混凝土结构随机温度徐变应力的计算。
Stochastic finite element method for random thermal creep stress in massive concrete structures is presented.
本文根据有关资料介绍了圆形空心墩在应力检算时温度应力的计算方法供参考。
Based on relevant materials, the calculation of temperature stress of round hollow piers in stress checking is introduced for reference.
直接对曲梁剪应力的积分方程求解，导出了曲梁剪应力和径向应力的计算公式。
The shearing-stress formula in curved beams can be derived by solving directly an integral equation, and the formula for radial stresses is also presented in this paper.
男子应力的计算去设计的一部分，他必须一样强烈的应力男子说，如果必要的。
The stress man's calculations go to the designer of the part, and he must make it as strong as the stress man says if necessary.
文中不仅介绍了重力拱坝自振频率与振型分布的研究结果，而且进行了振动应力的计算。
The authors not only presented the results of the investigation about the frequency of vibration and its amplitude of massive arch dam, but also computed its vibration stress.
以多孔介质双重有效应力理论为基础，结合地质力学知识，建立了水平地应力的计算模型。
Based on the double effective stress theory and Geomechanics, this paper has built a horizontal crustal stress calculation model.
同时在试验的基础上，推导得植树后断面平均流速减小值和植物坝段床面剪应力的计算公式。
And base on the experiment, calculating formula of cross section mean velocity's reduction after planting and bed shears stress of vegetation dam block are established.
针对残余应力的计算，结合铸造中落砂工艺，对落砂前后不同的传热模型进行了相应的调整。
In order to calculate residual stress in the casting, different heat transmission models before and after shake out had been established.
然后研究压剪断裂的力学机理，分析有水压力作用的压剪断裂应力强度应力的计算及其断裂判据。
Then, the criteria of hydraulic fracturing of different tensile cracks are discussed. The mechanism and formula for stress intensity factor are put forward.
在实践的基础上对二辊矫直机辊面接触应力的计算进行了理论分析，给出了辊面接触应力的计算方法。
This article presents an analysis of the contact stress of rolls in two-cross-roll straightener and gives a method for the calculation.
早龄期时混凝土结构内应力的计算为优化混凝土材料的组成提供了依据，尽可能减少混凝土结构的开裂。
The optimization of mix composition of concrete according the calculation of inner stress at early age may reduce the cracking risk of concrete structure.
基于剪切筒模型和常用疲劳加载方式，首先建立了循环荷载作用下钢筋与混凝土界面脱粘应力的计算模型；
Based on the shear-lag model and the usual loading way, the computation model of interfacial debonding stress under tension-tension cyclic loading is established first.
论述了地应力的分布规律、地应力的矿场和岩心测试方法、地应力的计算及其在油气勘探开发中的应用等。
The in situ stress distribution, test technique in laboratory and in filed, calculation and applications in petroleum exploration and development are the key concerned aspects.
通过无网格技术，改进了离散元法应变、应力的计算方案，使其能够在连续介质大变形的计算中得到更为准确的应变、应力分布。
Moreover, a new technique for calculating the strain and stress of DEM model has been proposed by using the concept of meshless method.
对膨胀内应力进行定性和定量的研究，并初步给出这种内应力的计算模型，为受腐蚀混凝土力学性能的进一步研究做了基础性工作。
Qualitative and quantitative researches on the internal stress have been carried out, which established the theoretical foundation for the study of mechanical property …
通过试验和解析方法对粘贴碳纤维布加固修复钢结构技术的粘结界面受力性能进行了分析，提出粘结界面剪切应力的计算公式，并在实际算例中取得了与试验较为吻合的结果；
Through tests and analysis of the adhesive interface performance of steel structure with CFRP, the paper sets up an expression of adhesive interface shear stress, which is validated by the tests.
工程师们计算桥梁的应变和应力。
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
设计了一套全息干涉的试验光路，以计算焊接残余应力。
A set of experimental optical lines is designed to calculate welding residual stress.
本文试对框架的计算简图和悬挑板转角处应力分布两个设计中常见的问题作一探讨。
This paper discusses the common problems in the design of frame calculation sketch and stress distribution at corner of the jetted plate.
首先进行强度和稳定性计算，主要进行了筒体、端盖的壁厚计算、水压试验应力校核以及叶轮、轴的强度校核。
First of all, for strength and stability, mainly a cylinder, cover the wall, the water pressure check and impeller stress test, the axis of strength checking.
此法与一般的计算方法相比在控制截面的应力分布方面有大的差别。
This method differs greatly from the present general calculation method in the stress distribution of controlled section.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
应用推荐