应力分量构成了一个对称的数组。
应力分量构成了一个对称的数组。
并讨论了应力分量法的局限性。
The limitation of the stress component method on solving such a problem is also discussed.
着重讨论了各雷诺应力分量的分布。
该方法还可以比较三维应力分量对阻尼的贡献。
Contributions of 3-d stress components to damping can also be studied by this method.
薄壁板壳结构表面的应力分量、主应力和有效应力。
The stresses component, principal stresses and effective stress on the surfaces of thin plate or shell structures.
能求出弹性地基板的地基反力，全部位移和应力分量。
The foundation reaction, all the displacements and stress components can obtained.
用该位移势函数表示的应变及应力分量，其解答简捷适用。
A simple and useful representation of the stress and strain components are obtained by displacement function.
迭加应在各应力分量上进行，然后再计算应力的当前等效值。
The superposition method should be used to the components of stresses and then the present equivalent stress will be counted.
一个实际拉或压应力沿某一特定平面和在该平面特定方向上分解得到的切应力分量。
An applied tensile or compressive stress resolved into a shear component along a specific plane and direction within that plane.
首先建立单一微裂纹在单轴压缩荷载作用下的力学模型，求出裂纹端部的应力分量。
A mechanical model is built firstly for single microcrack under uniaxial compression loading, and the stress component of microcrack end is calculated.
为迅速检查斜交微面上的应力是否存在（即是否合理），给出了求应力分量的解析式。
For quick check of the existence or the reasonableness of the stress on an oblique diminutive area we work out the analytical formula.
在二维或三维的情况下，屈服极限是当所有应力分量的某个函数达到某一固定值时达到的。
In two and three dimensions the yield limit is reached when a certain function of all the stress components reaches a fixed value.
在二维或三维的情况下，屈服极限是当所有应力分量的某个函数达到某一固定值时达到的。
When the material does not display a yield point, a quantity known as the proof stress is used when making design calculations.
推导了温度应力分量和收缩应力分量的数学表达式，建立了面板应力多因素时变分析模型；
The mathematic expressions of temperature stress and dry shrinkage stress are deduced. The time-varying model based on multiple factors of concrete face stress is established.
人工裂隙的方向受地应力场中两个相互垂直的主应力分量—最大主应力和最小主应力的制约。
The orientation of the induced hydrofractures arc controlled by the mutually perpendicular orientations of the maximum and minimum principal stress components of in situ stress field.
于是，在采用了线性形状函数来表达的位移分量以后，应力分量对运动方程的贡献必恒等于零。
Thus, if we use such form functions to represent the displacement components, the effect of internal stresses to the equations of motion vanishes identically.
利用应力的坐标变换关系，推导出主应力与应力分量之间的微分关系，使主应力的精度计算更加简便。
By coordinate transformation of stress we have the differential relationship between the principal stresses and stress components to facilitate deviation calculation.
根据分析所得的动、静应力分量，采用有限元与圆弧滑动法相结合的有限元一圆弧法，分析了挡土墙的抗滑稳定性。
The stability factor of retaining walls is analyzed with the finite element and slip circle method, which is based on the results obtained by static and dynamic FEM.
针对石油化工行业大量采用的等径挤压三通，提出了一个计算内压载荷下的纵向平面内挤压圆角处各应力分量的近似方法。
An approximate method for calculating the elastic stresses at the squeeze at the squeeze corner sections of an identical diameter Tee branch pipe connection under internal pressure was presented.
将复势函数进行罗伦级数展开，通过边界条件得到罗伦级数展开式系数的递推公式，并由复势函数确定应力分量和位移分量。
The complex potentials were expanded into Laurent Series whose coefficients could be expressed by recurrent relations. The stresses and displacements were then be determined by complex potentials.
通过对应力函数法与应力分量法的比较，论述了按应力求解弹性力学平面问题时，如何选择合适的解法，以取得难度小、求解快的效果； 并讨论了应力分量法的局限性。
The selection of a suitable stress method to easily and quickly solve a plane problem in elasticity is expounded through comparing the stress function method with the stress component method.
它们被称为应力的九个分量，均示于图1。2中一点附近的无限小的平行六面体单元上。
These are known as the nine components of stress and are illustrated with reference to an infinitesimal rectangular element about a point in figure1.2.
本文提出四层以上弹性层状体系各个应力、应变分量的简易计算法，可供柔性路面设计之用。
This paper presents a simple method of calculating various stress and strain components in a four-layered or more elastic layered system, which can be used in flexible pavement design.
目的研究体外反搏治疗心肌缺血时血管对剪切应力各频率分量的影响。
Objective To study the effect of enhanced external counterpulsation (EECP) on frequency components of shear stress in myocardial ischemia condition.
该模型依据经典塑性理论，能够明确指定复杂应力状态下湿化变形的各分量。
It bases on the classical plastic theory, and the components of wetting deformation under complicated stress state may be determined clearly.
这两个分量反演的地震孔隙率和岩石地震应力从不同角度反映地层的结构和骨架的弹性性质。
The seismic porosity and rock seismic stress which are obtained from inversion of the two energy components reflect stratigraphic structure and frame elastic characteristic in different aspects.
它们被称为应力的九个分量，均示于图1.2中一点附近的无限小的平行六面体单元上。
These are known as the nine components of stress and are illustrated with reference to an infinitesimal rectangular element about a point in Figure 1. 2.
观测对象包括：体应变，分量应变，分量应力和钻孔应力-应变差应变。
Observational objects include: cubic strain, component strain, component stress and differential strain of borehole stress strain.
大量震源机制解结果表明，运城盆地存在以水平拉张为主要特点的局部小区域应力场，盆地北部水平挤压分量占优势。
A host of focal mechanism solutions show that there is a locally small regional stress field characterized by horizontal compresion component is dominant in the north of the basin.
应用推荐