热应力分析的结果为ITER重力支撑系统的设计或改进提供了可靠的理论依据。
The results of thermal stress analysis lay the solid foundation for design and improvement for gravity supports system for ITER .
本课题用ANSYS软件对某大型氧化反应器流固耦合进行了有限元应力分析计算。
In this thesis, stress analysis and calculation for a large oxidized reactor considering are made by using ANSYS FEM code.
我们采用球壳无矩理论来进行应力分析。
For stress analysis we have adopted the membrane theory of spherical shells.
在对深沟球轴承几何参数及接触应力分析的基础上，给出了沟曲率半径系数的控制方程，并对轻、中、重系列轴承的外圈沟曲率半径系数的选取进行了探讨。
Based on the analysis of geometry parameters and contact stresses of the deep groove ball bearings, the control equation of groove curvature radius has been drawn out.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
对结构进行精确计算各种单独的压力和拉力，这就叫应力分析。这或许是桥梁建设中最复杂的技术。
The calculation of the precise nature of the individual stresses and strains in the structural, called analysis, is perhaps the most technically complex aspect of bridge building.
最后，将地下衬砌的变几何与不变几何的应力分析结果作了比较。
Lastly, the stress analyses of geometrically altered and not altered underground structures are compared.
本文应用三维边界元法和三维有限元法对有挡锚链进行了三维应力分析，并将其结果与电测实验数据作了比较，吻合得很好。
This paper analyses three-dimensional stress distributions of the stud anchor chain by the theory of finite element and boundary element.
在完成管壁强度计算的基础上，进行管壁有限元应力分析。
Based on completion of wall strength calculation, then do the finite element stress analysis.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
扩散所引入的应力分析。
主应力分离是光弹性应力分析的关键问题，但已往所用的方法都比较繁琐。
The key of photoelastical stress analysis is separating main stress, but the methods which we have used before are complicated.
应力分析方法、材料强度理论、安全指标与设计准则是结构强度设计与计算理论的主要内容。
Stress analysis method, material strength theory, safety index and design criteria are main contents in strength design and computation of structures.
按照所建立的计算模型对含有圆形孔的复合材料板进行应力分析。
Stress of composite material plate with circular hole was analyzed by the model above.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
研究内容主要是此类构件的应力分析和平面内的弹塑性稳定。
The researches about this kind of members mainly focus stress analysis and in-plane inelastic stability.
将图像处理技术应用于实验应力分析，取得了理想的效果。
Some techniques of image manipulation were applied to stress analysis and the result was perfect.
完成了用激光拉曼光谱法测定焊后金刚石磨粒残余应力的实验研究工作，实际测得的残余应力分析的规律与模拟结果相一致。
The measuring experiment of the residual stress of the brazed diamond grains by Raman has been finished. And the results are consistent with the modeling ones well.
研究的主要目的是把这种材料应用于光弹塑性应力分析。
The main purpose of our study is to use such material in photoelastic-plastic stress analysis.
利用有限单元法进行组织工程中的组织应力分析具有重要意义。
The method of analyzing the tissue stress with finite element method plays a vital role in tissue engineering.
阐述了应力分析可靠性预计的作用与意义。
The function and implication of stress analysis for reliability prediction is introduced.
本文介绍了图像全息法在光弹性应力分析中的应用。
This paper describes an application of image holographic method to the photoelastic stress analysis.
本文将边界元法引入光弹性应力分析使主应力分离问题得到简化，从而使光弹性应力分析方法更简便可行。
In this paper we use boundary element method to separating main stress. It can simplify the problem and provide a practical method for separating main stress.
本文提出了弹性地基上板的三维应力分析方法。
This paper presents the three dimensional stress analysis method of slabs on elastic foundation.
电源模块热、小信号、应力分析测试。
Thermal tests, small signal tests, and stress analysis test.
圆柱滚子轴承在载荷作用下的应力分析，是典型的边界非线性的接触问题。
To compute the stress of the cylindrical roller bearings under loading is a typical boundary nonlinear contact issue.
文章以该插针工艺为研究主体，涵盖了线路板应力分析和工艺参数的优化过程。
The paper studies this pin technology and covers the analysis of printed circuit board strain and process parameters optimization.
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
并对优化后的薄膜进行了应力分析和模态分析。
Moreover, the stress and mode analysis for the optimized film are made.
为了确保飞轮螺栓连接的可靠性，采用接触分析法对螺栓进行了应力分析。
In order to ensure the reliability of flywheel bolt connection, stress analysis of bolt is performed using contact analysis method.
应用推荐