• 等高平面位置显示器

    Constant altitude plan position indicator, CAPPI;

    youdao

  • 土地测绘内容主要土地使用范围平面位置

    The content to survey and map the land mainly is the flat surface position of the scope for the land.

    youdao

  • 随着截平面位置改变,可以锥面上截出形状不同椭圆

    We can obtain ellipses of different shapes by intersecting a cone with a plane in different relative positions.

    youdao

  • 开挖区域影响,承受最大值、最小值体的平面位置变化的。

    The planimetric position of the piles which endure the extremum axial force is different.

    youdao

  • 文中论述Z”型钢板施打平面位置垂直控制工艺方法

    The paper highlights the technology and methods for laying out the Z-type steel sheet piles at sea and controlling the verticality of the steel sheet piles.

    youdao

  • 基岩标较以往监测标志重大改进兼有高程控制平面位置控制作用

    The bedrock bench marks have made a significant improvement and play role in both of height controlling and plane location controlling.

    youdao

  • 研究了综合曲线形态衰减系数大小平面位置地质异常体的类型定性关系

    Comprehensive curve pattern, attenuation coefficient and the relationship of plane position and geological abnormity had been conducted.

    youdao

  • 文艺复兴时期绘画技巧使用透视画法平面位置构建一个不同的形象

    Renaissance Painting Technique, which USES the principles of forced perspective, to construct an alternative image within the frontal composition.

    youdao

  • 详细介绍公路路线控制点坐标进行公路直线曲线平面位置定线数学模型

    This paper introduces the mathematical model for highway route alignment. This model can determine plan position of highway straight and curve by the control points.

    youdao

  • 通过实验考察了喷枪喷嘴结构不同喷枪平面位置不同条件下吹气对熔池搅拌影响

    The influences of nozzle design and position of injection lance on the mixing time of hot metal in the ladle were experimentally investigated.

    youdao

  • 凯恒中心正立面由平面位置重合结构连廊相连,支撑提升架的选择困难

    There are two steel galleries in front elevation of Kaiheng Center, whose support frame and lifting frame selection were difficult during construction.

    youdao

  • 法线法线平面确定空间平面位置方法复杂的空间几何问题简化平面几何问题。

    Through the method in which a plane in space can be determined by normal and normal plane, the complicated problems in space geometry can be imaged into the problems in plane geometry.

    youdao

  • 利用地质雷达探测准确地提供管线平面位置埋设深度情况施工管理提供可靠依据

    Applying geological radar can provide the plain position of pipeline and the buried depth, condition are summarized, affording the reliable basis for construction management.

    youdao

  • 实践经验表明水库工程泥沙设计关键在于合理确定泄洪排沙洞进口高程及其平面位置

    It is showed that the appropriate design for inlet elevation, diameter and planar situation of a flood discharge tunnel is the key to the sedimentation engineering design for a reservoir.

    youdao

  • 提出了一种新型投影关系的相干光相关器,这种相关器具便于校准输出平面位置的优点。

    A new scheme for incoherent correlator, with an inverse image projection procedure is proposed which can be calibrated easily.

    youdao

  • 本文光线轨迹方程出发,推导了锥形梯度折射率纤维物像关系式,得出了它的等效焦距平面位置

    Starting from the ray path equation, object-image relationships are found and used to determine the equivalent focal length and the principal planes of tapered GRIN fiber.

    youdao

  • 衍射理论几何成象理论出发,分析研究了显微物镜平面附近小孔光栏的衍射和平面位置成象

    From the theory of light diffraction and geometrical optics, aperture diffraction near the focal plane of microscope objectives and imaging on the image plane are studied.

    youdao

  • 研究结果表明变换光束带有强烈干涉及衍射结构入射光束分布工作平面位置选择对变换结果显著影响

    The results have shown that the transformed light beam has an obviously interferential and diffraction structure, and the distribution of incident laser beam a…

    youdao

  • 提出利用去除雷达平面位置图像(PPI)噪声然后利用形态学原理构造目标结构斑点噪声杂波

    In this paper, wavelet is used to erase speckle noise in radar PPI, and the principle of morphology is used for building structure element to filter off the speckle noise and clutter.

    youdao

  • 在内端盖机座连接 处法兰一个轴承上所铣平面位置相对的,槽放置测速传感器;将 轴头压板改为齿盘结构。

    A groove is milled on the flange for installing the speed sensor at the junction of the inner end cap and the seat, which is facing to the plane on the bearing cap.

    youdao

  • 根据内力测试结果,对基坑短边内不同位置、短边长边内桩的受力进行对比分析,得出了平面位置桩帽梁受力的影响。

    The effect of pile's place upon top beam's internal forces by comparing the top beams' stress in short-side with that in the long-side and in the inner-side of short-side was also studied.

    youdao

  • 分别介绍了空间直线平面数学及计算机中的表示方法重点强调空间直线和平面位置关系判定方法,并介绍了一方法的应用。

    The expression of line and level in three-dimensional space in computer is introduced respectively, laying the emphasis on the method of judging the position relation of line and level.

    youdao

  • 结合施工实际保证多面土体准确形成应用立体几何确定各条线空间位置,并推导出任意情况下交线平面位置的关系公式和交线坡比。

    Connecting with the practice of construction, the method was used to learn the space location of each separate line which was to ensure the accurate formation of multi-surface earth.

    youdao

  • 基于GIS油气管线设计系统是以GIS数据为基础,确定管道设计中线的位置,包括平面位置纵向埋深;提取管线数据自动进行工程土方量、占地面积、工程拆迁等方面的工程概预算

    Pipeline design system based on GIS is based on data of GIS to locate the center line of pipeline in plane and portrait, and extract pipeline data to make automatically project budget estimate.

    youdao

  • 断言这个位置矢量平面

    Well, I claim that the position vector is in the plane.

    youdao

  • 如果一下任何时刻运动位置矢量速度矢量,它们决定某个平面

    So, if you just look at the position vector, and the velocity vector for any motion at any given time, then together, they determine some plane.

    youdao

  • 当然,可由此行星地球天空中辨认太阳的运行轨迹黄道平面北半球夏季七月天空中的位置

    Of course, defined by the path of the Sun through planet Earth's sky, the ecliptic plane rides low during July nights in the northern hemisphere's summer skies.

    youdao

  • 如果平面运动那么位置速度也会在这个平面上。

    OK, if I'm moving in the plane, then position and velocity are in there.

    youdao

  • 使用消失来配置各平面位置,可以让能够顺着平面变化的趋势增加元素

    With this setup in position I was now able to add elements that will be flowing along these planes.

    youdao

  • 使用消失来配置各平面位置,可以让能够顺着平面变化的趋势增加元素

    With this setup in position I was now able to add elements that will be flowing along these planes.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定