根据工具、工艺试验参数要求，完成了该试验井各组成系统零部件的设计分析。
According to the requirement of the tools test parameter and craft test parameter, have done the design and analysis for the subsystem parts.
通过试验，得出了该配方的最佳工艺参数，并对影响抛光效果的因素进行了分析。
The optimal technological parameters of the formulation were obtained by test, and the factors influencing polishing effects were analysed.
并选用以上正交试验的工艺参数，对泵盖进行实际压铸生产。
Under the condition of orthogonal experiment process parameters, we actually produced Die Casting pump cover .
在试验中采用多种熔剂的合理配比，控制适当的工艺参数，确定了较好的坯釉配方组成。
In the experiment, the rational matching of many kinds of flux and control the proper craft parameter are adopted to makes up better the formula composition of body and glaze.
为此，利用正交试验设计方法对九7区注汽工艺参数进行了敏感性分析和优化。
Therefore, steam injection parameters for Nine-7 Block were analyzed and optimized using orthogonal experiment design.
对实际系统进行了喷涂工艺试验，给出了不同工艺参数条件下，采用红外测温仪进行皮膜温度检测的试验结果和理论分析。
Through the experiments with different process parameters, the result of the coatings temperature measurement with the infrared thermo scope and its theoretical analysis were given.
本文提出了一种进行工艺参数设计的新的试验方法，它的主要优点是，提高了产品性能的稳定性。
This paper proposes a new experiment method for designing technology parameters. Its main goodness is that it will improve the steadiness of the products character.
目前，在实践中仍主要依靠试验和经验来获得激光工艺参数。
At present, the parameters of laser processing are chosen mainly by experiment and through experience.
并通过工业试验为工艺设计和工业运行确定了有关参数和运行条件。
And through industrial experimental running, relevant parameters and operating conditions are determined for technological design and industrial running.
通过熔覆试验和金相组织分析，获得了最佳工艺参数。
The optimal technological parameter was obtained by laser cladding experiment and metallographic structure analysis.
运用试验优化设计的方法，优化了工艺参数。
The experiment optimization design method are used to the craft parameters optimal.
根据试验数据。确定了合适的烧结工艺参数。
Based on the testing data, the suitable sintering process parameters were defined.
在工艺参数更改前是否作试验。
Is there any experiment conducted before process parameter change.
通过切削试验，确定了合理的工艺参数。
Appropriate processing parameters are established through cutting test.
在DK903型梳棉机上利用NCT进行了工艺参数优化试验，有效控制了梳棉结杂数量。
Optimizing test of technology parameters was done in DK903 carding machine by using NCT, and the Numbers of carding trashes were controlled.
设计了铝合金铸轧工艺模拟的实验装置，研究了在该试验条件下，铝合金变形组织与工艺参数的关系。
An experimental instrument for simulating the roll-casting process was designed, and the effect of processing parameters on the microstructure of al alloy was studied.
通过工艺方案选定和工艺评定试验，探索制订了最佳工艺参数，使焊接的高压汽水分离器筒体达到了质量要求。
After the selection of process scenario and process assessment test, the optimal process parameters are found and the welded cylinder of the high pressure separator satisfies the quality demands.
并通过工艺试验确定了合理焊接规范参数。
着重于初生晶种制备工艺参数的试验研究和二次晶种存在的探讨；
The technological parameters for making first crystal seeds and the influence of existence of secondary seeds have been studied.
文中简要介绍了高灰煤泥浆制备的试验研究、工艺设计、技术参数等。
The paper presents a brief description of the experimental study of slurry preparation, system design and parameters involved.
试验对花生奶茶的制作工艺参数、配方进行了确定。
At last, the optimum processing parameters and prescription of peanut tea milk was fixed.
试验结果表明：热压温度、保压时间等工艺参数对梯度合金的热压致密化及梯度组织的形成有着明显的影响；
The results show that a continuous gradient distribution of Co could be obtained by controlling the hot pressing parameters.
分析了转杯速度、牵伸倍数、捻系数对弹性转杯纱性能的影响，并通过正交试验对工艺参数进行了优化。
The effects of rotor speed, draft ratio and twist factor on the properties of elastic rotor-spun yarns were investigated, and the technology optimizing was done through the orthogonal test.
对桑果汁饮料的工艺技术及影响因素进行了详细的试验和分析，提出了产品的较佳配方和工艺参数。
Processing technology and effect factors of mulberry fruit juice drink were tested and analyzed detailedly, and the better direction and technology parameters were brought forward.
介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。
The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了束状孔落矿工艺中采用爆破相似理论，试验的爆破参数和工艺。
The blasting similarity theory, blasting parameters and technology applied in mining ores by bunch hole are introduced.
通过试验确定了发酵工艺参数，以及果汁和发酵麦芽汁的配比，并确定了产品的生产工艺流程和质量控制指标。
The fermentation parameters, ratio of pineapple fruit and fermented wort, processing technology, and quality index were established based on the result of the experiment.
通过试验确定了发酵工艺参数，以及果汁和发酵麦芽汁的配比，并确定了产品的生产工艺流程和质量控制指标。
The fermentation parameters, ratio of pineapple fruit and fermented wort, processing technology, and quality index were established based on the result of the experiment.
应用推荐