怀特赛兹教授的“纸芯片”相对于其他“芯片级实验室”方案来说要更加简便，其他的方案大多需要复杂的生产工艺并使用了诸如玻璃、塑料那样笨重的材料。
Whitesides' paper chips are much simpler than other lab-on-chip projects, many of which require intricate production methods and heavier materials such as glass and plastic.
公司利用了一种改造过的LCD生产工艺，它将利用电子墨水和塑料底物来构成屏幕。
The firm USES an adapted version of LCD manufacturing which employs electronic ink and plastic substrates to make its screens.
必须具备陶瓷或者塑料成型工艺、设备和模具的设计知识。
Knowledge of ceramic or plastic injection molding process, equipment and mold design is a must.
从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。
The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.
熟悉塑料包装产品加工的流程与工艺。
Familiar with the procedures and processes of the plastic packaging.
义乌市哥特工艺品厂有10年的产品模型设计制作，塑料模具制造经历。
YiwuGothic product model design and manufacture of handicrafts factory for 10 years, Plastic Mould Manufacturing experience.
研究了塑料光纤从材料合成到光纤成丝的整个工艺过程。
The plastic optical fiber's fabricating process from raw material synthesis to fiber drawing was studied.
用于高级塑料涂装，汽车及配件涂装和工艺品涂装等。
Particularly suitable for plastic coatings , automotive refinish coatings , car-accessories coatings , art-craft coatings , etc.
产品设计中塑料工艺的应用较为广泛，对塑料工艺的研究显得非常重要。
The use of plastic technics is more and more widely, and the research of it is very important.
它的重大意义就是通过使用新的废弃塑料注入工艺来减少炼钢炉运转需要的能量。
Equally significant is the reduction in the power required to run the furnaces using the new waste plastic injection technology.
本文论述了用机械发泡法制备聚乙烯醇缩甲醛泡沫塑料的工艺及其影响因素。
The preparation technology and its effect factors for polyvinyl formal foam plastic by way of mechanical foaming method were studied.
论述了热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.
综述了硼酸锌的制备工艺及其在塑料中作为阻燃剂的应用研究进展。
The research progress of preparation technology and application as flame-retardant in plastic of zinc borate were reported.
注塑成型工艺是开发塑料进气歧管的重要环节。
The injection molding is an important tache to exploit plastic air intake manifold.
针对塑料注射成型工艺的特点，提出了残余应力和翘曲变形的数值模拟方法。
A numerical study of residual stresses and warpage was undertaken according to the characteristics of plastic injection molding process.
介绍了硬质聚氨酯泡沫塑料全水发泡工艺的基本原理。
Introduced the rigid polyurethane foam plastics entire water foaming craft basic principle.
该工艺实现了两种不同配比塑料的结合。
The process realized the blend of two kinds of different proportions plastics.
阐述了用可熔型芯注射成型热固性塑料的工艺过程和原理、工艺控制要点。
The technological process, principles and the key points of technology controlling of the thermosetting plastic by using the fusible core injection moulding were described.
分析了塑料斜齿轮的传动优点和工艺特点。
The drive advantages and technologic advantages of plastic bevel gear were analyzed.
主要产品有食品加工、塑料、工艺、纺织、电子、纸制品等。
The main products include food processing, plastics, handicrafts, textiles, electronics, paper products and so on.
论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
The molding method, process, and the equipment of thermoset runnerless injection molding have been discussed in this paper.
论述了改性聚乙烯泡沫塑料的配合技术、成型工艺及常见质量问题的分析。
The correlated technology of PE-foams, the forming process and the analysis of usual QCproblems were dealt with.
论述了模塑料注射成型的方法、工艺、设备和模具设计方面的问题。
Molding method, process, and equipment of injection molding of molding compound had been discussed in this paper.
尽管现在做得更精致且有许多改进，现有的塑料电镀工艺仍然使用从前开发的基本技术。基本步骤如下。
Current plating-on-plastics processes still employ the basic technology developed at that time, although inevitably many refinements and improvements have been. The basic steps are as follows.
分析了洗发液瓶盖塑料件的成型工艺。
The processability of the plastic bottle cap for shampoo was analyzed.
介绍了无阻燃剂阻燃酚醛塑料的制备工艺、性能、成型条件等。
The preparation technology, property and molding conditions of the flame-retardant phenolics without flame retardant is introduced.
分析了数码相机后盖塑料件的工艺特点，介绍了数码相机后盖注射模结构设计和工作过程。
The technological characteristics of back cap of digital camera were analyzed, and the structural design and operating process of the injection mould were introduced.
分析了数码相机后盖塑料件的工艺特点，介绍了数码相机后盖注射模结构设计和工作过程。
The technological characteristics of back cap of digital camera were analyzed, and the structural design and operating process of the injection mould were introduced.
应用推荐