叙述了工程陶瓷的镜面加工技术。
This paper describes the process of mirror finishing of engineering ceramics.
本文介绍了工程陶瓷的种类、性能。
In this paper, the class and characteristic of engineering ceramics is introduced.
公司下设工程公司和工程陶瓷阀门厂。
Company under the engineering companies and engineering ceramics factory valve.
磨削加工后工程陶瓷零件表面会产生残余应力。
工程陶瓷的力学性能受材料本体和表面状况的共同影响。
The mechanical properties of engineering ceramic are impacted by itself and its surface status.
并与几种典型工程陶瓷材料的磨削加工进行了对比研究。
Moreover, Several typical ceramics ane also ground to compare with ZTM ceramics.
工程陶瓷材料具有耐高温、耐腐蚀、抗磨损及抗热冲击等优点。
Engineering ceramics feature resistance to high temperature, corrosion, wear and hot impact.
绝缘工程陶瓷电火花铣削技术是作者开发出的一种新型加工技术。
A new technique of electric discharge (Ed) milling insulating engineering ceramics has been recently developed by the authors.
试验表明，该钻头是钻削工程陶瓷、宝石等硬脆材料的理想工具。
The result of experiment shows that the special diamond drill is a ideal tool for machining ceramics , gemstones, etc.
主要介绍了国内外工程陶瓷特种和常规加工技术的开发及应用近况。
This paper deals with the latest development and application in traditional and special machining technology of engineering ceramics at home and abroad.
研究了电火花线切割加工工程陶瓷的表面完整性及其淬火强化处理。
This paper attempts to study the surface integrity of WEDM engineering ceramics and their strengthening by quenching.
介绍了基体采用45钢，表面喷涂工程陶瓷的旋塞阀芯的研制情况。
The development of the ceramic coat plug valve core which substrate USES 45 steel is introduced.
因此，对工程陶瓷磨削损伤进行全面深入研究和了解是非常重要的。
Therefore, it is essential to study and understand comprehensively the grinding induced damage in ceramic.
用添加长链醇的有机磨削液来提高工程陶瓷加工效率是一种非常有效的方法。
It is an effective method to enhance the engineering ceramic grinding efficiency using organic grinding fluid with addition of long chain alcohol.
近年来，高压磨料水射流这种新兴的加工工程陶瓷的方法越来越受到人们重视。
In recent years, more and more importance has been attached to the new machining method of engineering ceramics, i. e. abrasive water -jet.
由于工程陶瓷很脆且膨胀系数小，所以轴承间隙不得过小，以免发生抱轴事故。
As the project is very brittle ceramic expansion coefficient and small, bearing gap may not be too small to hold axis in order to avoid accidents.
工程陶瓷材料具有许多优良性能：高硬度、高化学稳定性和低的导电、 导热率等。
Engineering Ceramic materials have many attractive properties such as high hardness high thermal resistance, chemical stability and low electrical conductivity, etc.
工程陶瓷因为具有极高的硬度、良好的耐磨耐蚀性和很高的脆性，使其成为难加工材料。
Engineering ceramic materials are difficult to machine because of their outstanding properties, such as high hardness, high wear resistance, high erosion resistance and high brittleness.
超声加工是目前加工玻璃、钻石、工程陶瓷等硬度高、脆性大材料的一种比较好的方法。
Today ultrasonic machining is a good method to machine hard and brittle material, such as glass, diamond, engineering ceramics.
工程陶瓷通常采用的加工方法是磨削，磨削表面粗糙度对零件使用性能具有很大的影响。
Grinding is usually used for engineering ceramics. The roughness of the ceramic surface has great influence on its performance.
基于工程陶瓷及纤维增强复合材料的性能特点，选用金刚石套料钻来对其进行钻孔加工。
Based on analyzing the characteristic of engineering ceramic and fiber composite, the diamond trepanning drill is selected.
复合装甲由铝合金、纤维复合材料及工程陶瓷组合而成，具有良好的综合性能，但难以加工。
The compound armor is composed with the aluminum alloy, the fiber composite materials and the engineering ceramics. It has good capability but is difficult to process.
在用金刚石锯片切割工程陶瓷材料的切削试验基础上，对影响切削力的各种因素进行了分析。
Based on the experiments of cutting engineering ceramics by diamond saw blades, the factors of influencing cutting forces are analyzed.
指出在整体工程陶瓷元件应用于水压传动尚不成熟的情况下，使用陶瓷涂层技术是经济可行的。
It is pointed out that ceramic coating is both of economical and feasible since components made of complete ceramics are not mature in water power transmission.
建立了工程陶瓷高速深磨中声发射的实验系统，自主开发了其中的声发射信号虚拟仪器采集系统。
An acoustic emission (AE) test rig with signal acquisition virtual instrument system has been developed for engineering ceramics high speed deep grinding.
工程陶瓷材料具有引人注目的特性：高硬度、高耐热性、化学惰性、热传导率低、断裂韧度低等。
Engineering ceramic materials have attractive properties: high hardness, high thermal resistance, chemical inertness, low thermal conductivity and low fracture toughness etc.
包括工程陶瓷材料难加工的理论基础研究，磨削机理，超精密磨削，高效磨削加工等方面的研究动态。
The main subjects for ceramic machining researches include the hard-difficult machining theory, the grinding mechanism, precision grinding and high efficiency grinding.
现代工程陶瓷以其优异的性能在阀门工业中得到了广泛的应用，陶瓷阀门必将产生巨大的社会经济效益。
The advanced engineering ceramics got an extensive application in the valve industry by its excellent function, the ceramic valve would produce a huge social and economic efficiency necessarily.
金刚石砂轮广泛用作硬质合金、工程陶瓷、光学玻璃、半导体材料、花岗岩等硬脆难加工材料的磨削工具。
Diamond grinding wheels are widely used as grinding tools in manufacturing of hard and brittle materials, such as hard alloy, engineering ceramics, optical glass, semiconductor materials, and granite.
金刚石砂轮广泛用作硬质合金、工程陶瓷、光学玻璃、半导体材料、花岗岩等硬脆难加工材料的磨削工具。
Diamond grinding wheels are widely used as grinding tools in manufacturing of hard and brittle materials, such as hard alloy, engineering ceramics, optical glass, semiconductor materials, and granite.
应用推荐