文章论述了UPS选型计算方法及工程计算实例。
This article deals with the calculating method for sizing Relating to UPS and engineering example.
计算实例证明，利用波浪预报和切片理论相结合分析运输可行性的方法，可以得到满足工程需要的分析结果。
It is indicated by calculated example that the feasibility analysis method combining precise forecast of wave and wind with strip theory can give satisfactory results for engineering.
结合实例，计算水利工程的公共效益的数值，使得此项目质量评价更具可操作性。
Combined with examples, the calculation of water conservancy project public benefit value, the project quality evaluation more practical.
结合一工程实例，通过分析和计算，对水处理方案进行了可行性研究。
Combining with an engineering example, the practicability investigation of water treatment has been done through analysis and calculation.
并以赤水河航道整治工程为实例进行了计算和综合分析，工程实践表明提出的计算方法是有效的。
And the methods are used to calculate and analysis Chishui River channel regulation project. The practical construction shows that the proposed calculation method is effectiveness.
通过一工程实例中悬挑梁的正截面配筋计算，对钢筋混凝土悬挑梁正截面超筋的概念进行了分析和探讨。
Through a calculation of the strength of normal section of extra-reinforced cantilever beam for an actual project, the conception of normal section of extra-reinforced cantilever beam is analyzed.
最后介绍了作者开发的面向并行工程的计算机辅助夹具设计系统的原理结构和功能，并给出夹具设计实例。
Acurrent engineering oriented computer aided fixture design system, developed by authors, is introduced in brief, and a concurrent fixture design is presented as an example.
阐述了二维和三维空间问题，并结合具体工程实例进行了计算分析，理论值与实测结果二者相吻合。
The theories of both two-and three-dimensional problems were developed and have been applied to the analysis of the engineering problems in the mining operations.
通过一个工程实例，介绍了爆破参数计算方法的应用。
Through an engineering example, the application of the calculating method of blasting parameters was introduced.
结合施工过程，通过对工程实例中问题的计算，使该方法为类似桥梁的设计施工的运用提供参考。
Combined with the construction process and engineering calculations of an instance, the method provides reference for the use of bridge design in the construction.
通过工程实例，介绍大直径筒仓按圆柱壳体理论计算不同工况的内力，计算方法简便实用，同时对不均匀堆煤的影响作了分析，可供设计参考。
Taking an actual project for example, the calculation of internal forces of a large diameter silo under different working conditions according to cylindrical shell theory is described in detail.
最后本论文详细地对四个工程实例进行了计算，探讨了设计过程中可能遇到的问题。
Finally, the case of four projects were calculated in details and all kinds of problems that might occur were discussed.
应用实例表明，该模型计算方法简单，便于工程应用。
Field application showed that the calculation method of the model is simple, and easy to apply in engineering.
根据现有规范规定，结合工程实例，本文提出了钢骨转换梁与上部剪力墙共同作用的结构的截面极限承载力的计算方法；
Combining with an engineering instance, basing on the current specifications and a certain construction, the transfer girder structure is analyzed by the method of finite element.
工程实例的分析结果表明，此方法计算精度高，模型识别方便，具有较高的的工程实用价值。
The practical engineering examples show that the computational accuracy is high and the parameters identification is convenient, so the method has considerable practical value.
工程实例分析表明，本软件计算结果正确，计算模型合理可行。
Engineering example illustrates that the results is correct and the computational method is reasonable.
结合一个工程实例计算，说明了该方法的适用性。
The practical engineering calculation example shows that the method proposed by author is available.
工程实例的计算表明，计算结果反映了水电站厂房的实际工作状态。
The calculation of project example indicates that the rate and the precision of calculation is satisfactory, the calculation result reflects the actual working state of powerhouse.
根据工程实例，从计算到结构设计阐述了需要设置锚栓的大型储罐的设计方法。
Based on the practical example from engineering, the design method for large storage tank with anchor bolts was illustrated from the calculation to the structure design.
通过实例进行的电力设备LCC计算分析，真实地反映了工程中现金流水平，证实了模型的正确性和工程实用性。
Results of case studies show that the proposed LCC model can be used to optimize the project schemes and improve the investment efficiency, and it is correct and practical.
通过工程实例，对其进行计算、分析，指出能够有效抑制谐波的电容器组合方式。
Through calculation and analysis in a project, the capacitor combination patterns which can effectively restrain harmonics are found out.
基于有限元计算软件ANSYS，结合工程实例，利用参数化设计语言APDL将拱坝等效应力应用于应力约束，进行拱坝体型优化设计。
With the ANSYS software and practical project example, the equivalent finite element stresses is applied in stress restriction for the shape optimization of arch dam by using APDL.
结合工程实例，采用该模型计算了桩基的自振频率，分析了弹簧等效刚度的变化对模型自振频率的影响。
Meanwhile, the natural frequency was calculated using this method in an example, and the natural frequency affected by the change of equivalent spring stiffness was also analyzed.
实例计算表明，本文提供的数据和公式具有足够的工程计算精确性。
The calculation shows that the data and formulas for this paper have accuracy of engineering calculation.
本文通过工程实例的计算分析对其原理和方法做了简要介绍，以期促进该法在工程中的进一步推广应用。
The paper briefly introduces the principle and the method of this calculation through the example of project to promote the popularization of this method in project management.
最后，通过工程实例计算，并与其它分析方法进行对比分析，表明了该方法的可行性与合理性。
Finally, the feasibility and rationality of the proposed method was shown by the practical engineering calculation and comparative analysis with other methods.
通过对几个已建工程实例的计算分析，获得一些应力重分配的基本规律和初步的结论。
Some basic rules and elementary conclusions of stress redistribution are obtained by the calculation and analysis of several will-built projects.
结合实际工程，给出了一般节点及特殊节点的计算实例，可供同类工程参考。
Combined with practical engineering, we give some calculation examples for general joint and special joint for reference to similar engineering.
结合实际工程，给出了一般节点及特殊节点的计算实例，可供同类工程参考。
Combined with practical engineering, we give some calculation examples for general joint and special joint for reference to similar engineering.
应用推荐