工件表面形貌特征的分析。
除油是钢铁工件表面处理最为常见的工序。
Disposing oil is broadly applied in iron and steel surface treatment.
成形砂轮的形状精度直接影响工件表面的加工质量。
The shape precision of form-grinding wheel can directly affect process quality of work-piece surface.
磨削深度是影响工件表面硬度和磨削淬硬层厚度的主要因素。
The effect of grinding depth on work piece surface hardness and hardness layer depth is important factor.
因而，这种测量方法可用于测量工件表面粗糙度参数仪器的设计。
There- fore, this measuring method may be in use for the design of the new measuring instrument which used to measure the surface roughness parameters.
文摘：在工件表面用喷涂方法形成陶瓷涂层，可以显著改善其性能。
Abstract: Ceramic coating on the surface of workpiece can improve its properties remarkably.
根据车刀磨损与工件表面纹理内在关系，研究和设计了显微监测系统。
According to the relationship between turning tools' wear and work-piece texture, a micro monitoring system is researched and designed.
根据对试验结果的分析得出高速铣削淬硬钢工件表面粗糙度的变化规律。
The change rule of surface roughness of the milled workpiece is obtained by analyzing the experimental data.
电解加工能够实现原子级精度的加工，而且不会破坏工件表面的物理性质。
Electrochemical machining (ECM) enables processing with atomic-level accuracy, without deteriorating the physical properties of the workpiece.
研究结果表明，选取合理的工艺参数能提高工件表面精度和减少刀具的磨损。
The results show that reasonable process parameters are help for better surface integrity of machined workpiece and decrease wears in the tool.
纳米级的磨粒冲击到工件表面，在以原子级去除的同时伴随着塑性变形的发生。
When abrasive grains impacted on the work piece surface, the top layer atomics are removed, plastic deformation appears at the same time.
并且喷砂能在工件表面交界处打出很小的圆角，使工件显得更加美观、更加精密。
And sand can in workpiece surface junction with small rounded corners, make artifacts appear more beautiful, more precise.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
框锯机锯切工件表面加工质量在很大程度上取决于进给速度和锯切速度的匹配关系。
The quality of the workpiece surface is subject to the matching relation between the feed speed and the sawing speed to some large extent.
在未固化的粉末涂装工件表面固体污染物是看不见的，涂膜一旦固化则变得十分明显。
In not curing powder coating surface of workpiece solid pollutants is invisible, the film became very obvious once curing.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层，能显著提高工件的抗氧化性能。
Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
液体磁性磨具光整加工技术是用磨具本身的流变特性对工件表面进行光整加工的新技术。
This liquid magnetic grinding apparatus polishing technology is a new polishing technology applying the rheologic property of grinding apparatus.
磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
为减轻金刚石刀具的磨损，提高工件表面加工质量，采用超声振动的方法切削不锈钢零件。
Ultrasonic vibration is applied to diamond turning of stainless steel in order to decrease diamond tool wear and improve the surface quality of the workpieces.
高速超高速磨削是提高磨削效率、降低工件表面粗糙度和提高零件加工质量的先进加工技术。
High speed grinding and ultrahigh speed grinding is an advanced processing technique which can raise grinding efficiency, reduce work surface roughness and promote machining quality of the parts.
随着加工温度升高，工件表面逐渐产生回火马氏体，这是造成工件表面硬度下降的主要原因。
Tempered martensite was gradually generated as the cutting temperature increased, which is the main cause of the decrease in the hardness.
结果表明：合理选择砂轮振动频率或工件主轴转速能有效提高工件表面精度，降低表面波纹度。
The results showed that, with appropriate wheel vibration frequency or appropriate workpiece rotate speed, the surface precision of workpiece can be improved.
它的喷涂材料丰富，能赋予工件表面以耐磨、耐蚀、抗高温等多种功能，并且工艺及操作简便。
The spraying material is abundant and it endows workpieces with wear-resisting, anticorrosive, temperature-resisting capabilities and so on.
大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.
喷砂能清理工件表面的微小毛刺，并使工件表面更加平整，消除了毛刺的危害，提高了工件的档次。
Sandblasting can clean up the small burr on the surface of the workpiece, and make the surface more smooth, eliminate the dangers of the burr, improve the level of the workpiece.
超高速磨削可提高磨削效率、提高零件加工精度和工件表面粗糙度，是一项具有广阔应用前景的技术。
The promising super speed grinding technology can enhance grinding efficiency, improve surface quality of work piece and reduce its surface roughness.
该系统有效的解决了电镀工件表面的强反射光给图像处理和检测带来的困难，适于生产现场自动检测应用。
This system can deal with the difficulty of image processing and detection aroused by strong reflection of electrodeposit surface and meet the demand of practice manufacture.
该系统有效的解决了电镀工件表面的强反射光给图像处理和检测带来的困难，适于生产现场自动检测应用。
This system can deal with the difficulty of image processing and detection aroused by strong reflection of electrodeposit surface and meet the demand of practice manufacture.
应用推荐