用广义应力表达了框架柱的塑性屈服条件。
The plastic yield condition of frame column is rep - resented in stress resultants.
粉末冶金材料屈服条件是广义塑性理论的重要基础。
The yield criterion for powder metallurgical materials was a key basis of generalized plasticity theory.
本文提出了可压缩性材料平面应力问题的余弦屈服条件。
The schemes and the yielding conditions of steel reinforcement in PPC beams;
本文介绍了确定具有塑性予应变板材后继屈服条件的实验方法。
The experimental method for determine the subsequent yield condition of a sheet with plastic prestrain is introduced.
和库仑屈服条件一起，构成了边坡稳定问题普遍适用的基本方程。
These equilibrium equations and Coulomb yield condition can form the fundamental equations of three-dimensional slope stability analysis.
本方法满足静力平衡方程和屈服条件，属于极限分析理论的下限解。
The characteristic line method meets the static equilibrium equations and yield conditions, which gives the lower limit of the solutions.
本文的分析建立在经典薄壳理论以及双矩弱作用屈服条件的基础上。
The analyzing method in this paper is based on the classical theory of plates and shells and the two-moment limited-interaction yield condition was used as the yield criterion for materials.
提出应力屈服条件的应变屈服轨迹，给出了复合胀形极限成形系数的解法；
The strain yield locus of the stress yield criterion was advanced and the strain ellipse method for calculating the limit bulging coefficient was given.
根据下限定理，构造了满足完全平衡条件、边界条件和屈服条件的静力许可场；
The block-structural plane model is used for constructing the statically admissible stress fields which satisfy the equilibrium conditions, boundary conditions and yield criteria.
结果表明：在小范围屈服条件下随着中间纯铝层厚度的降低，其峰值载荷呈线性增加；
The results show that, in the condition of small scale yielding (SSY), the peak value of loadings linearly increases with decreasing pure Al sheet thickness.
文中证明，特征线法的应力关系式与本文的屈服条件、屈服函数的极值条件是相同的。
When the material does not display a yield point, a quantity known as the proof stress is used when making design calculations.
本文对一般性边坡，给出了满足力与力矩平衡及滑动面上屈服条件的稳定性的精确分析方法。
An accurate method for slope stability analysis is provided in this paper, with which the equilibrium of force and moment, and the yield conditions on the sliding plane will be reached.
对屈服条件与屈服函数的极值条件进行了讨论，在不需要流动法则的情况下建立了速度方程。
The extreme conditions of yield condition and yield function are discussed; and a velocity equation is established under the condition that no flow rule has been required.
阐述了粉末烧结材料塑性变形的基本性质，分析了粉末烧结材料现有屈服条件中存在的问题。
The basic properties of sintered powder materials in plastic deformation are explained. Some defects in present yield criteria of the materials are analysed.
本文分析了回转壳体正负成形的力学模型，基于应力屈服条件对回转壳体的变形进行了分类；
In this paper, the mechanical model of positive-negative formation for revolving shell is analyzed, the classification method is given according to the stress yield criterion.
导出了基于双剪屈服准则的钢筋混凝土球扁壳的屈服条件，并利用此屈服条件求解出其极限荷载。
The yield conditions of axisymmetric circular plate and shallow spherical shell of reinforced concrete based on Twin shear stress yield criterion are presented in the paper.
本文对非均质的一般性地基，给出了满足力与力矩平衡及滑动面上屈服条件的地基承载力计算公式。
This paper gives the calculation formulas of foundation bearing capacity which can meet the balance of force and moment and the yield conditions on sliding plane for common heterogeneous foundation.
通过烧结铁圆柱试样单向压缩试验，验证了粉末冶金烧结材料广义塑性屈服条件的合理性和适用性。
Based on the single axial compression of sintered iron cylinder specimens, the rationality and applicability of generalized yield criterion are validated for sintered powder metallurgy materials.
若规定简单拉伸时两种屈服条件重合，则两者的等效塑性应变增量的相对偏差为15 .5 % ；
Their relative deviation of the equivalent plasticity strain increments was 15.5%, assuming that the two conditions coincide under simple tension;
通过烧结铁圆柱试样单向压缩试验，验证了粉末冶金烧结材料广义塑性屈服条件的合理性和适用性。
Based on the single axial compression of sintered iron cylinder specimens, the rationality and applicability of gene...
在多数壳体问题中，弯矩和薄膜力并不是同时重要的，因此在屈服条件中，可以不考虑力矩和薄膜力之间的相互影响。
In most shell problems the moments and direct forces will not be of simultaneous importance so that yield relations between moment and force are of limited importance.
由上述实 心圆 轴的屈服强度公式计算出的屈服强度与两个屈服条件符合的很好，误差分别为1.7％和6.0％。
The yield strength derived according to the formula of solid cylinder specimen was accordance with Mises and Tresca yield criterions much better, and the relative error was separately 1.7% and 6.0%.
然后在第三章主要基于API 579准则，以双剪屈服条件为基础，进行了油气长输腐蚀管道剩余强度分级评价技术的叙述。
Then in chapter 3, the multilevel assessment system of residual strength of corrosion pipeline is introduced on the base of API579 and double shearing yield strength principles.
粉末冶金材料屈服条件是粉末冶金材料广义塑性理论的基础，其数学表达式对粉末冶金材料广义塑性理论方法的建立有重要影响。
Based on the yield criterion and plastic potential theories, a plastic constitutional relation, yield condition and yield curve equation in plane strain for powder metallurgical material were derived.
你要知道，在开始时需要屈服于市场(很差的条件，低收入)，但是如果你逐渐树立了自己的地位，那么就能够更好地安排自己的时间。
Just know that you will come begging to the market at first (poor conditions, lower pay) but if you establish yourself you will have options to manage your time better.
是理智地妥协，还是无条件地屈服？
金属的实际分离始于屈服或断裂(视切削条件而定)，从切削刀尖开始。
The actual separation of the metal starts as a yielding or fracture, depending upon the cutting conditions, starting from the cutting tool tip.
金属的实际分离始于屈服或断裂(视切削条件而定)，从切削刀尖开始。
The actual separation of the metal starts as a yielding or fracture, depending upon the cutting conditions, starting from the cutting tool tip.
应用推荐