同时，因为每台主机都需要接入大量的视频音频信号，对设备接口的设计和生产工艺也很关键。
At the same time, because each host access needs a lot of audio and video signals, the equipment interface design and production process are also crucial.
上面的分区表使用了MTD_BLOCK接口对闪存设备进行分区。
The above partition table USES the MTD_BLOCK interface to partition the flash device. The device nodes for these partitions are.
它最初包含的是对usb和PCI设备的支持，以及对某些网络接口的自动配置的支持。
It initially included support for USB and PCI devices, as well as support for automatically configuring some network interfaces.
正确配置的SNMP监视器会在设备重启、启用或禁用其接口或对设备的访问失败时接收到警报。
A properly configured SNMP monitor receives these traps in the event that the device restarts, its interfaces become enabled or disabled, or when a failed attempt to access the device occurs.
对于本例，我们使用了web服务代理以及此设备的转换功能来启用对我们web服务应用程序的一个JSON接口。
For our case, we utilized the web service proxy and transformation capabilities of the appliance to enable a JSON interface to our web service application.
涉及的嵌入式网络化装置是一个具有以太网接口的分布式输入输出装置，主要应用于工业自动化控制领域，对大型设备实施远程监控。
The embedded network device resarched is a distributed I/O device which has an ethernet interface, it is applied mainly in industrial automatic control field to monitor heavy-duty equipments remotely.
对嵌入式设备的网络化的网络接口技术，做了详细分析，并以80c 196kc和rtl 8019as为例给出了网络接口的硬件和软件实现。
Also in this paper, analyzed in details the net inter-face technology of embeded device, and gave the hardware and software implementation of 80c196kc and RTL8019AS.
同时可为集中控制提供数据接口，今年公司计划自主开发系统平台，可集中对多套设备进行集中管理。
At the same time provide for centralized control of data interface, this year the company plans developed platform can be focused on sets of equipment for centralized management.
通过对EZUSB枚举模式的研究，了解EZUSB怎样通过本身的接口下载程序，以便更好的发掘设备的功能。
We know that how EZUSB interface itself is used to download code via researching enumeration models of EZUSB, so that the functions of device are performed thoroughly.
另外，与支持usb 3.0接口下一代智能手机的出现，用户将能够对移动设备之间的更快的数据传输。
In addition, with the advent of next-generation smartphones that support the USB 3.0 interface, users will be able to transfer data much faster between mobile devices.
由于RS232通信接口协议简单，工业控制系统已广泛应用RS 232口对各种设备进行信号采集和控制。
Since the protocol for RS232 is simple, RS232 has been widely used in various equipment to collect and control the signal data in industrial control system.
本文结合V12绘图仪的实际维修对该设备接口电路进行了详尽地分析，列举了接口电路的常见故障并给出了相应的故障排除方法。
In combination with the practical maintenance of V12 plotter, the paper analyzed in detail the interface circuit of the equipment and gave the troubles easily appeared and removing methods.
其次对现场设备，人们要求它具有相应的通信能力，即要求它具有工业以太网的智能通讯接口。
Secondly people want field equipments have intelligent communication interface , that is , equipments must have the corresponding ability of communication with each other.
通过对TC 35i模块的应用程序接口的分析，设计出它的外围电路，从而实现一个可以进行移动短消息收发的设备。
By analyzing the application program interface of TC35I wireless module, the peripheral circuit is designed. Through the device we can receive or send short messages.
本文采用了基于STR720的车载GPS设备的设计，并通过USB、UART接口升级软件，使用电子地图有效的对汽车进行定位。
This paper presents a design of vehicle GPS device based on the STR720, and through USB, UART interface upgrade software. Electronic maps can be effectively used in positioning of the car.
给出了省、地级微机故障录波数据远传及处理系统的硬件体系结构设计方案，着重对系统采用的通信方式、通信接口、设备配置等进行详细的分析介绍。
It Presents a new hardware design for realizing remote transmission and processing of recorded fault data. The data communication modes, interfaces and hardware configurations are explained in detail.
本论文主要研究利用医学影像设备提供的符合DICOM 3.0标准的专用数字接口对医学影像设备进行网络连接技术。
This thesis main research utilize medical that equipment offer to accord with DICOM3.0 special-purpose digital interface of standard go on network link to the medical image equipment image Technology.
本文结合激光设备的特点，对几种常见通讯接口技术加以阐述。
The paper describes some common used communication interfaces in light of laser equipment.
本文采用USB总线取代传统的接口总线，通过对usb协议和设备构架的理解，实现了对鼠标系统进行了硬件和软件设计。
In this article, Universal Serial Bus replaces traditional ones, and through the understanding for USB agreement and equipment frame to realize the hardware and software design for mouse.
本文设计的USB - ARINC 429总线通信接口可用于实现对基于429总线进行通信的航电设备的检测和维修。
The USB-ARINC429 bus Interface reported in this thesis can be used for testing and maintaining aeronautical electronic devices based on ARINC429 bus.
硬件部分以针对嵌入式应用的S3C4510B微处理器作为主控制器，利用S3C4510B强大的网络功能和众多外设接口实现对现场设备的远程控制。
The hardware is based on S3C4510B as the main controller, which has powerful Internet function and many interfaces to remote control local equipment.
脑机接口对残疾人的实用性可以分为两大类：交流，控制物理设备或虚拟设备。
The practical possibilities that brain-machine interfaces offer to disabled people can be grouped in two categories: Communication, and controlling physical devices and virtual devices.
本文通过对国产主流全自动生化仪器实现HL7数据接口，研究了如何按照HL7标准，实现仪器设备与LIS系统的信息交换。
With a HL7 data interface applied to a mainstream fully automatic biochemical instrument, this paper implements the information exchange between biochemical instruments and LIS following HL7 standard.
以新研制的USB接口水位变送器为例，结合USB协议和计算机基本原理，对设备软、硬件设计进行了深入分析，探讨了在数据采集设备中直接使用USB接口的实现方法。
For the newly developed water level transmitter with USB, on the basis of USB protocol and computer principle, the software and hardware of the instrument is analyzed in detail.
硬件设备代理层实现了同小区内智能网关设备的通信协议SGMP ，同时完成了对服务层接口的调用；
The hardware equipments layer implement the communication protocol—SGMP with the intelligent gateway equipments in the residence, and accomplish the application of interface of the service layer.
脑机接口对残疾人的实用性可以分为两大类：交流，控制物理设备和虚拟设备。
JOSE MILLAN: "The practical possibilities that brain-machine interfaces offer to disabled people can be grouped in two categories: Communication, and controlling physical devices and virtual devices."
2007年：完成电子设备芯片级开发，对USB、COM口等接口协议进行深入研究，实现通过计算机对电子、自动化设备进行控制。
Year 2007: Accomplished chip level R&D, deep research about the protocol of USB, COM and etc. , master the tech. of how to control electronic and automatic equipments through computer.
示例4：建立一个对所有设备，主要因为使存储量从设备接口类的接口系统的名单。
Example 4: Build a list of all devices that are present in the system that have enabled an interface from the storage volume device interface class.
示例4：建立一个对所有设备，主要因为使存储量从设备接口类的接口系统的名单。
Example 4: Build a list of all devices that are present in the system that have enabled an interface from the storage volume device interface class.
应用推荐