因而能用于双轴燃气轮机的微机数字控制和对气动性能参数监控中的失效参数实时估值计算。
Thus the model is capable of microcomputer digital control of gas turbine and of real time estimation of mal functioned parameters in the gas turbine monitoring system.
微机实时控制系统能得以广泛应用的关键是采取行之有效的抗干扰措施。
The key problem that microcomputer real time control system can be used in wide fields is taking measures of effectual noise immunity.
本文对微机实时控制系统的抗干扰问题进行了研究。
The antijamming of the microcomputer real time control system is made a study of in this paper.
本文对四段全控桥电路在整流、逆变工况的微机实时控制进行了理论阐述和物理模拟试验。
This paper concerns the microcomputer-based real-time control of four-step controlled bridge which works both in the mode of rectifier and inverter.
提供能满足实时控制要求的可靠的数据通信，是实现两级微机控制的一个技术关键。
To provide reliable data communication which can meet the requirements of real-time control is a technical key problem when two-leve microcomputer control is put into action.
本工作建立了微机联机的温度和压力实时控制系统。
An inexpensive microcomputer assisted system has been presented for on-line measurement and real-time control of temperature and pressure in vapor-liquid equilibrium determinations.
研制开发了高真空排气过程微机实时控制系统，并对该系统的硬件构成和软件开发作了介绍。
Constant POwer control rule is also presented. The hardware and software in the microcomputer real-time high-vacuum exhausting system is introduced.
该仪器基于LPC932单片微机为核心微处理器，来完成数据采集、处理，存储，实时时钟控制，液晶显示，通信等功能。
This instrument based on LPC932 as the key microprocessor to gather , deal with and store data, to control real-time clock, to complete the liquid crystal display and communication.
由微机与PL C组成的分布式系统，使实时控制和综合处理有机结合。
The dispersed control system consisting of a microcomputer and PLC makes its real time control and composite handling organically combinable.
该方法无须对原机器硬件作任何改动，可用于微机实时控制系统中，方便地获得任意采样频率。
No hardware alteration is needed in this method. The time-interrupt achieved can be used in real-time microcomputer control systems and various sample frequencies can thus be conveniently obtained.
这不但使电弧等离子体诊断过程的时间大大缩短，而且由于检测时间短，为直接采用微机实时控制焊接电弧创造了先决条件。
The diagnosing time of plasma is greatly shortened, and the prerequisite of real time control with microcomputer of welding arc is thus provided.
其结果证明了采用微机图象法来实现实时控制是可行的。
The results show the feasibility of the approach used to realize the real time control.
本文提出了在微机实时测量与控制中开发汉字的方法，给出了有关程序及流程图。
A method of Chinese words construction for practical control process of real time is proposed. The corresponding programs and program flowcharts are given.
以某一视频采集卡为例，实现了多路视频信号在微机上的实时处理和控制，同时给出了视频流的显示、录制和回放方法。
Using microcomputer with video-capture CARDS, multi-video signal is controled and gathered, methods of obtain video-data stream is found include video display, record and replay.
多路信息采集、实时显示和数据处理全由微机控制。
Multiple information aquisition, real time display and data processing are performed by microcomputer.
介绍一个微机实时控制系统。它用于水泥生产过程中的信息采集、处理和控制。
Introduces a microcomputer real-time control system used for collection, processing and control of the information in cement manufacturing process.
在实时控制中实现微机自控，工程师需要根据控制要求，用汇编语言或高级语言编写程序。
The control engineer must learn to program in either assembly language or high level languages and must be faimliar with organization and interface of microcomputer's real-time control system.
试验结果表明，该微机实时控制系统成功地控制了可控硅弧焊整流器的动特性，具有实用性和可靠性。
The test results proved the practicability and the reliability of this realtime control system because of its success in control of the dynamic characteristics of SCR welding rectifier.
本文主要论述了在微机实时控制系统中干扰源的产生机理和干扰的传播途径。同时，介绍了一些行之有效的干扰抑制方法。
This paper presents the producing principle of interference source, and its couple channel. Some effectual interference immunity measures are introduced too.
高温高压染色机微机控制系统是一个实时控制系统。
A microprocessor control based dyeing process control system which hasvbeen used in High Temperature and High pressure Dye-Machine is discussed in this paper.
介绍熔喷法非织造布生产线的微机实时测控系统，根据系统特点采用了基于专家控制规则的PID 复合控制算法，能够同时完成七路温度和流量的自动测量和控制。
The control system on the non-woven production line by MCS-51 single-chip computer were presented. According to the characteristic of the system, PID added expert control is used.
介绍熔喷法非织造布生产线的微机实时测控系统，根据系统特点采用了基于专家控制规则的PID 复合控制算法，能够同时完成七路温度和流量的自动测量和控制。
The control system on the non-woven production line by MCS-51 single-chip computer were presented. According to the characteristic of the system, PID added expert control is used.
应用推荐