本文介绍了一种新型的精密工作台定位控制系统。
This paper presents a new system for precisely positioning of the worktable.
该仪器的特点在于省却了一个载物台自动定位控制系统，使仪器成本大幅度降低。
The characteristic of the instrument lies in that a location system of the object stage is saved, and the cost of the instrument is greatly reduced.
研制了基于行波超声波电机与步进电机驱动的机器人多自由度机械臂精密定位控制系统。
This study puts forward an auto-detecting method of detecting the precision of dial gauges based on traveling wave ultrasonic motor and FPGA.
针对圆柱-球体三自由度超声电机难以建立精确数学模型的特点，设计了模糊自适应定位控制系统。
In this paper an effective control scheme using fuzzy-adaptive controller is proposed for the position servo systems of cylinder-sphere 3-dof ultrasonic motor.
该方法对于海上平台、动力定位船舶及潜器等控制系统都是适用的。
The method is suitable for position control systems of oil platforms, dynamic positioning vessels and underwater vehicles.
该试验台主要由气源增压系统、工件气动定位系统、测量系统和电气控制系统等组成。
The test consists of increasing air pressure system, workpiece pneumatic locating system, measuring system, electrical controlling system and so on.
为了满足机器人位置跟随精度和定位精度高的要求，建立了基于F2812DSP的机器人位置控制系统。
To satisfy high requirements for position follow accurateness and location precision of robot system, this paper sets up F2812 DSP-Based robot position Control system.
不久的将来，像巡航控制系统和全球定位系统等舒适系统将会应用于汽车，巡航控制系统考虑外部的因素，诸如天气、路况以及我们周围的交通状况等。
In the near future, comfort systems like cruise control that considers external factors like weather, road marks and traffic around us and GPS will enter the car.
控制系统发出脉冲指令驱动三坐标机械手，带动注射枪完成定位加注。
The control system sends out impulse dictates to drive three-coordinate manipulator with injection-gun to finish the accurate position orientation.
文章对控制系统故障传播的规律进行了研究，运用数学图论的有关理论提出了一种基于图论的故障定位搜索算法；
The rule of Computer Control System′s faults spread is studied in this paper, which put forward an algorithm of fault detection with graph theory and some suppose of faults.
为了满足当前交流伺服位置跟随精度和定位精度高的要求，本文研究并开发了基于DSP的交流伺服位置控制系统。
To satisfy high requirements for position follow accurateness and location precision of ac servo system at present. This paper researches and develops ac servo position control system based on DSP.
在分析系统结构及工作原理的基础上，提出了视觉定位系统、上位控制系统、执行机构等各分系统的设计。
Based on the analysis of system structure and working principle, the design of the visual position subsystem, upper control subsystem, executing structure subsystem has been carried out.
结合检测装置和微机控制系统，设计并研制了基于前馈控制同数字PID反馈控制相结合的复合控制的微定位系统。
Combining computer system and detecting device, the micro-positioning system of compound control is designed and researched. This system is based on feedforward and digital PID control.
通过实际系统的运行和调试，堆垛机的提升控制系统在控制中获得了更高的定位精度和更快的运行速度。
Then the hoist motor of the stacker crane is controlled successfully by the VVVF speed regulation and the better orientation precision and running speed of stacker crane are expressed in the practice.
粘片机系统中的主要部分是控制系统和视觉定位系统。
The key parts of thick-film LED bonder system are control system and visual position system.
列车轨道占用识别目的是在平行的多轨道区域识别列车所占用的轨道信息，为列车定位子系统或控制系统提供可靠的信息。
Train track occupancy recognition is to determine if the train is passing over a switch and to supply reliable information for train positioning system and train control system.
视觉伺服可以应用于机器人初始定位自动导引、自动避障、轨线跟踪和运动目标跟踪等控制系统中。
Visual servo system can be used in the control systems of robot original orientation guiding, obstacle avoiding, trajectory tracking and moving object tracking, etc.
提出一种根据随机海浪频谱来实时模拟随机海浪的方法，它可以用于研究动力定位船舶及其控制系统在不同海况时的性能。
Provides a way to simulate waves in real-time according to random-wave-spectrum. It can be used to study the performances of dynamic positioning ship and control system under different waves.
公开一种远程摄像机定位和控制系统，其允许单个操作者使用和支承在手臂范围外的摄像机。
A remote camera positioning and control system is disclosed that permits a sole operator to use and support a camera out of arm's reach.
交流伺服技术具备响应速度快、定位精度高等特点，将其应用在工业平缝机的控制系统中，可提高工业平缝机的整机性能。
Ac servo systems have some strongpoint, such as fast response speed, high accuracy positioning, etc. The performance of entire machine is enhanced when it applies in control system of sewing machine.
同时为了提高惯性驱动机构的定位精度，设计了一套闭环反馈定位停止控制系统。
Simultaneously in order to enhance the pointing accuracy of the newinertia driving mechanism, designed a set of closed loops feedbacks localization the control system.
设计了自走车的控制系统和定位算法，针对自走车的导航图像的图像处理，开展了相关研究工作。
Design the control system and orientation algorithm, aimed at image processing techniques of guidance images, related research is implemented.
在往返式传动控制系统中，很多时候都会涉及到多点定位问题。
Multipoint position problem will be involved usually in reciprocating drive control system.
基于数控弯管机的矢量弯管原理，利用P LC和定位模块控制单元相结合的方法来实现弯管机控制系统的设计。
Based on the vector bender principle of the numerical pipe-bending machine, use PLC and position module to finish the design of bender's control system.
叙述客车上常用的几种电子控制系统，如巡航控制、电涡流缓速器、全球定位系统的性能特点及工作原理。
This paper describes the principle and performance of several kinds of electronic control systems used in buses, such as cruise control system, electromagnetic retarder and global position system.
针对位置自动控制系统的要求，建立了系统数学模型，研究了精锻机控制系统的定位控制算法。
As to demands of automatic position control system, a model of system mathematics was set up. Control algorithm of precise forging machine orientation is studied.
针对位置自动控制系统的要求，建立了系统数学模型，研究了精锻机控制系统的定位控制算法。
As to demands of automatic position control system, a model of system mathematics was set up. Control algorithm of precise forging machine orientation is studied.
应用推荐