chxt：多轴的方位。
并将该插补器集成在多轴联动数控系统中。
The interpolator is integrated into a CNC system with multiple axis control simultaneously.
该方法可用于多轴联动、机器人等的运动控制。
The method can be applied in multi-axis linkage and motion control of robot.
介绍了某专用多轴钻床的用途、结构特点及原理等。
The application, the structure and principle of the special machine were introduced.
结论多轴位点片是诊断隐匿性肋骨骨折的有效工具。
Conclusion Multiaxial spot film is an effective tool to diagnose the occult rib fracture.
试验表明，该控制器能够满足多轴电机伺服运动控制的需要。
Experiment indicates that this controller could satisfy the requirement of multi-axle motor-servo movement controller.
混凝土湿筛前后的多轴破坏准则的研究，目前尚处于初步阶段。
Experimental study on multiaxial failure criterion of concrete before and after wet-screened is just at the initial stages.
介绍了一种预测受多轴交变载荷工程构件的低周疲劳寿命的方法。
A method is outlined for making low cycle fatigue life prediction for engineering components subject to multiaxial loading.
实验表明用dsp实现步进电机的多轴联动控制比较简单且灵活。
The experiment indicate that use DSP to control multi-axes stepper is Simple and flexible.
通过对这些技术的链接和研究，实现了大型叶片的多轴联动加工。
The technology is applied in machining of large hydraulic turbine blade with study.
低循环多轴疲劳失效是航空发动机低压压气机轮盘的主要失效形式。
Low cycle multiaxial fatigue failure is the main failure mode of aeroengine compressor disk.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
尤其是专为提高性能原来设备制造商机器，需要多轴同步和低价格。
Especially Designed for Enhancing the Performance of OEM Machinery that Requires Multi-Axis Synchronization and Low Price.
钻床也许被分为三种一般类型：立式钻床、多轴钻床和摇臂式钻床。
The drilling machines may be classified into three general type:Vertical spindle, Multiple Spindle, and Radial Spindle machines.
可编程的多轴运动控制器，稳定性和操作性达到国内外领先技术水平。
Programmable multi axis motion controller, stability and operation to achieve the leading technical level at home and abroad.
所提出的模型和结论，可推广应用于多轴数控机床的误差建模与补偿。
The model and conclusion can be applied to the modeling and compensating of errors of multi-axis CNC machine tools.
作者描述了使用多轴c - 1后弓螺钉固定寰枢椎这一较新颖的技术。
The authors present a novel technique of atlantoaxial fixation using multiaxial C-1 posterior arch screws.
因为肩端是多轴性关节，可多方向自由运动，所以特定某个方向是困难的。
Because the shoulder end is a multi axis joint, it can move freely in many directions, so it is difficult to be specific in one direction.
为新的多轴空间加工数控系统产品的进一步开发提供理论基础和实践平台。
This offers the theoretical foundation and practice platform for the new further development of NC multi-axis space machining machines.
为了改进网络化多轴同步控制系统的性能，研究了运动控制网络的时钟同步方法。
In order to improve the performance of networked multi-axis motion control systems, the clock synchronization method of motion control networks was studied.
针对混凝土多轴应力状态下各向异性损伤的特点，建立了各向异性弹塑性损伤模型。
In view of the anisotropic damage characteristics of concrete under multiaxial stress state, an anisotropic elastoplastic damage model is presented.
搭载艾森独创的多轴板式包胶结构，彻底解决市面上起绕绕不上、包偏等不良现象。
Ascend original plate equipped with plastic coating multiaxial structure, solve from around the wound is not on the market, including migraine and other undesirable phenomena.
多轴协调控制策略是多轴运动控制系统的核心，它直接决定了运动控制系统的性能。
Multi-axis coordinate control strategy is the core of the multi-axis motion control system. It influences performances of the motion control system directly.
本文以多轴钻孔组合机床传动箱为实例，对系列产品装配图自动绘制的方法作了探讨。
This paper discusses the assembly drawing of series products as an example of the gear transmission of the multi-spindle head.
介绍了集散式多轴拧紧机控制系统的设计原理及其在汽车工业网络制造管理中的应用。
This paper introduces design principle of distributed multi-axis tightening machine control system and application in network manufacture and management of automobile industry.
本文用红砂岩试件做了一系列的试验，探讨了在多轴压缩下红砂岩的强度和变形特征。
Systematic tests were conducted on specimens of red sandstone under polyaxial compression, and the strength and the deformation characteristics were carefully investigated.
利用多轴数控机床实现复合加工是目前国际上流行的加工工艺之一，属先进制造的一种。
To achieve compound machining by utilizing multiple spindle nc machine tool is one of the most popular international machining technology, and it belongs to advanced manufacturing technology.
以多点成形压力机中多轴齿轮传动调形单元为例，研究了传动系统输出响应的动态特性。
This paper analyzed the system output response dynamic characteristics of spinning gear adjustment control system of multi-point forming press.
计算结果表明，该模型能较好地描述混凝土在单轴及多轴单调加载和疲劳加载下的性质。
It is proved by calculation that the model can describe well the performance of concrete under uniaxial and multiaxial monotonic loading and fatigue loading.
计算结果表明，该模型能较好地描述混凝土在单轴及多轴单调加载和疲劳加载下的性质。
It is proved by calculation that the model can describe well the performance of concrete under uniaxial and multiaxial monotonic loading and fatigue loading.
应用推荐