同时基于模糊偏好关系来确定各指标的权重，由此建立多目标优化模型。
Meanwhile, based upon fuzzy preference, a multi-objective optimization model was established, by which the decision maker can decide the weights of different objectives.
并将多目标优化模型的决策结果和单目标优化模型决策结果进行对比分析。
And then comparative analysis between decision-making results of multi-objective optimization model and the one of single-objective optimization model was done.
在数值模型的基础上，运用响应矩阵法建立了地下水系统供排水最多目标优化模型。
Based on the mould and by employing the response matrix method a multi-purpose optimal mould for the groundwater supply and drainage has been put forward.
在定量分析供应商数量与供应风险及采购总成本关系的基础上，建立了多目标优化模型。
The problem of structure optimization in supply is essentially how to determine the supplier number. The number of suppliers is related to the supply risk and total purchase cost.
实验结果表明，所提出的多目标优化模型有较强的抗噪声能力，理论和实验有较好的一致性。
The experiment results indicate that the MOP in this paper has better consistency with the theory and practice as well as obvious advantage of antinoise ability.
根据飞剪剪切机构的工作特点，综合考虑连杆运动轨迹、速度和位置角，建立多目标优化模型。
Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position Angle of connecting rod, a multi-objective optimization model is built.
提出并运用模糊优属度的概念对常规的多目标优化模型进行了改造，建立了模糊优属度多目标优化模型。
The fuzzy degree of membership Multi objective model which is used for solving the qualitative objective is established.
针对适形调强放射治疗(IMRT)治疗计划逆向设计的需要，建立了IMRT治疗计划的多目标优化模型。
Aiming at the inverse design of treatment planning for intensity modulated radiation therapy (IMRT), the multi-objective optimization model for IMRT was discussed.
在模型求解算法方面，设计了两种作业类型的计算矩阵，利用MATLAB软件解决了多目标优化模型求解繁琐的难题。
In the model algorithm, designing two types of computing matrix operations, using MATLAB software to solve the multi-objective optimization model solving complicated problems.
方法引入了金属铣削加工参数多目标优化模型，应用目标达到法对模型求解，又基于神经网络建立了金属铣削参数自动获取模型。
It introduces the multi-objected optimization model of the metal milling process parameters and applies the goal attainment method to ask for the explanation for the model.
针对这一问题，建立了以起升机构占用空间最小和行星齿轮减速机构用材最少为目标的多目标最优化数学模型。
Aim at the problem, this paper establishes the mathematical model of multipurpose optimization to made hoisting mechanism to occupy minimum space and planet gear to use minimum material.
通过实例，详细地叙述了多目标设计研究的具体实施过程，得出了优化模型。
By a specific example, the process of applying multi-objective design study is described and then the optimal model is obtained.
通过原始模型和优化模型的比较，证明多目标设计研究能较好地对相互冲突的多个设计目标进行优化。
Through comparison between primitive model and optimal model, it is proved that multi-objective design study can optimize the design objects which conflict each other.
基于合作型协同进化模型，提出了一种新型的多目标优化进化算法。
A new multi-objective optimization evolutionary algorithm based on the model of cooperative co-evolution is proposed in this paper.
采用多目标、多约束的优化方法，以悬臂施工主梁的斜拉桥为例，建立了施工阶段的优化模型，并给出算例。
Based on the cable-stayed bridge using method of cantilever, the paper establishes the optimization model of construction phase with multi-objective and multi-constraint and gives the example.
介绍了盘式制动器混合多目标优化问题数字模型的建立。
The establishment of mathematical model of multi-objective optimum design for disc brake is presented.
考虑随机性、模糊性的影响，建立了DH106动力箱的多目标可靠性模糊优化模型。
Taken account of the influence of stochasticness and fuzziness, multi objective reliability fuzzy optimization model of DH106 dynamic box is established.
提出一种改进的模型修正方法，该方法采用多目标优化技术使得结构的减缩模型与实测结果相吻合。
This paper proposed an improved mode updating approach for adjusting structural reduced models to experimental results based on multi-objective optimization techniques.
基于不变形预张力的基本概念，建立了斜拉桥成桥状态的多目标、多约束的优化模型，并通过有限元程序求解成桥索力。
Based on the basic concept of the un-deformed pretension of cable, the optimization model of finished state with multi-objective and multi-constraint is used.
结果建立起了ASA问题的一个多目标整数规划模型，为后续优化算法研究奠定了基础。
Results An multiobjective programing model based on integer programming for ASA problem is established, which serves as the foundation for later researches on optimizing algorithms.
提出了多工位级进模工步设计的多目标最优化组合的数学模型、通用算法以及建立其CAD系统的实现方法。
The mathematics model of multiobjective optimum combination, good algorithms and CAD system for strip layout of multistep progressive die are given in this paper.
为了提高演化算法的效率，减少优化时间，提出一种多目标模型管理框架。
In order to improve the efficiency of evolutionary algorithm and reduce the optimization time, a multi-objective model management framework was proposed.
本文建立了水轮机引水部件多目标水力优化的数学模型，并进行了计算机数字仿真。
The mathematical model is established for the multi-objective hydraulic optimizations of the diversion components of hydraulic turbines, and the computer simulation is carried out.
首先提出了综合运输通道组合运能的定义及综合运输通道组合运能多目标决策模糊优化模型。
In the paper the combined capaeity of CTC was defined and a fuzzy optimization model of the multi-objective decision-making for the CTC combined capacity was proposed.
考虑随机性、模糊性的影响，建立了DH106动力箱的多目标可靠性模糊优化模型，并运用此优化方法，进行了DH106动力箱的可靠性模糊优化设计。
Taking account of the influences of randomness and fuzziness, multi objective reliability fuzzy optimization model of DH106 dynamic box is established, and it is solved by the above mentioned method.
多目标集团采购计划优化模型的研究。
多目标集团采购计划优化模型的研究。
应用推荐