研究了玻璃粉／环氧树脂封接复合材料的制备与性能。
The preparation and properties of superfine glass powder/epoxy resin composites were studied.
要想达到预期效果，不论何种粘接，必须仔细做表面的准备。当用环氧树脂层压复合时，我对固化复合表面的准备如下。
The surface must be carefully prepared for any kind of bond to perform as expected. When laminating with epoxy, I prepare a cured composite surface as follows.
通过试验可知，复合灌浆料可以替代环氧树脂灌浆，并且灌浆与否及饱满情况直接影响加固效果。
According to the experiment, it is considered that the composite grout material can replace epoxy resin and whether grouted in or not can influence the result of reinforce.
叙述了用玻璃纤维增强的环氧树脂复合材料等来复制古代大型天文简仪龙柱的工艺试验和制作过程。
This paper describes the technological test and the making process of the Abridged Armilla with the ancient large astronomy in epoxy-glassfiber reinforced composites, etc.
这种纤维与环氧树脂复合制成的结构吸波材料对雷达波具有良好的吸收。
The radar absorbing structural materials composed of the SiC composite fibers and epoxy resin has good radar absorbing properties.
用全动态dsc研究了先进复合材料用高性能双组份环氧树脂的固化反应动力学，获得了固化反应的动力学参数，并建立了固化动力学的唯象模型。
The cure kinetics of a bicomponent high performance epoxy resin was studied by dynamic DSC analysis, and the parameters of the cure reaction were obtained to establish a phenomenological model.
利用超声波和偶联剂处理的方法，制备了纳米微粒填充环氧树脂基复合材料。
Three kinds of nanoparticles were efficiently dispersed into the epoxy resin by using coupling agents and ultrasonic wave.
利用NYL-200D型压力实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了准静态和动态冲击压缩实验。
Quasi-static and dynamic compression experiments of carbon fiber reinforced epoxy resin matrix composite cylinder structures are implemented by NYL-200D testing machine and drop weight equipment.
以环氧树脂为基体，以玻璃布和碳布为增强材料，采用模压成型工艺制备了某型无人机机翼环肋复合材料结构件。
The aerofoil rib parts for pilotless aircraft was manufactured by using mold pressing process with epoxy resin as matrix materials and glass cloth as enhancement materials.
这种纤维与环氧树脂复合制备的结构吸波材料具有良好的雷达吸波性能。
The structural radar absorbing materials composed of the fibers and epoxy resin have good radar absorbing properties.
选用13型压电复合材料作为研究对象，压电相为PZT5H，环氧树脂作为基体相。
Type 13 composite piezoelectric material is used as research object, which composed of PZT5H is piezoelectric component and epoxy.
研究了电子束固化eb 99 - 1环氧树脂及其as4碳纤维增强复合材料。
The properties of epoxy resin matrix EB99-1 and its composites reinforced by AS4 carbon fiber were investigated.
以二甲基硅油和环氧树脂对聚氨酯进行复合改性，制备改性聚氨酯防水涂料。
The polyurethane was composite modified with dimethyl silicon oil and epoxy resin, and a modified polyurethane waterproof coating was prepared.
本发明公开了一种新型碳纤维复合型材，它是由重量比为2 ~ 3∶1的碳纤维编织布和固化环氧树脂组成。
The invention discloses a new carbon fiber composite section, which comprises carbon fiber woven cloth and cured epoxy resin according to 2-3:1 of weight ratio thereof.
本发明的压电导电环氧树脂复合阻尼材料具有优良的消除噪声、振动和防静电等阻尼效应。
The piezoelectric and conductive epoxy resin composite damping material of the invention has good damping effects such as eliminating noise and vibration, preventing electrostatic and the like.
介绍了环氧复合材料拉挤的设备、模具及工艺，并对环氧树脂拉挤的基本原理及最佳工艺参数进行了探讨。
This paper describes the device, mold and technology for pultrusion of epoxide composite. The principle and optimum parameters were probed.
以贝壳微粉为刚性填料，研究了硅烷偶联剂对贝壳微粉改性环氧树脂复合材料性能的影响。
The effects of silicane coupling agent on the properties of epoxy matrix composites filled with rigid shell powder were studied.
从大庆油浆得到的COPNA树脂为基体的炭纤维复合材料，表现出的力学性能优于酚醛、环氧树脂，间接证明了COPNA树脂与炭纤维有较强的亲和性。
Results showed that the mechanical properties of the composites from COPNA resins from Daqing slurry are better than those from conventional bakelite and epoxy resin.
为了满足传感器的使用要求，本文以玻璃纤维增强环氧树脂基复合材料薄膜作为传感器应变片的基底材料。
A study of milled glass fiber reinforced composites used as the strain gage backing material is present in this paper, which made it suitable more well for the demands of load cell.
本论文研究的复合封装材料以双酚A型环氧树脂EP828／E51作为基体，以氧化铝作为填充材料，有望替代纯环氧固化物作为脉冲压电电源用新型封装材料。
The encapsulate composite for pulsed piezoelectric power supplier was investigated in this paper, in which a bisphenol A liquid epoxy EP828/E51 was resin matrix and aluminum oxide was filler.
本文制备了可二阶段固化的形状记忆环氧树脂基体，研究了形状记忆环氧树脂及其复合材料的形状记忆特性和力学性能。
From the design of epoxy resin system, two-stage rigidization epoxy resin matrix with thermal induced shape memory property was prepared.
阐述了在降低复合材料成本和提高复合材料性能方面，中温固化环氧树脂基体研制的重要性和必要性。
The paper describes the importance of developing the epoxy resin cured at moderate temperature to reduce the production cost and improve the performance of composites.
双酚A甲醛多环氧树脂是一种用于制备高级复合材料的树脂基体。
Polyglycidylether of Bisphenol A-Novalac is an epoxy matrix of high performance composites.
介绍了环氧树脂基纳米复合材料的制备方法、性能、作用机理及研究进展。
Recent research advances in fabrication methods, the properties and the function mechanism of the epoxy resin-based nanocomposites were introduced in this paper.
研究了以环氧树脂ep为基的TGS铁电复合材料的热电驰豫现象。
The pyroelectric relaxation of TGS ferroelectric composites based on EP has been studied.
研究了以环氧树脂ep为基的TGS铁电复合材料的热电弛豫现象。
The Pyroelectric relaxation of TGS ferroelectric composites based on EP has been studied.
本文主要阐述了性能优良、应用广泛的复合型环氧树脂粘合剂，在化工贮罐、防腐涂层的工艺和方法。
The paper introduces good quality and multiple-use complex epoxy resin binder and its application in anti-corrosion coating of chemical storage tanks.
以合成的木质素基环氧树脂为基体，蒙脱土为增强材料，采用插层复合法制备了酶解木质素基复合材料。
Based on the resin with the montmorillonite as reinforcing material, the lignin-based composite material was acquired by the intercalation compounding method.
双压电膜是由压电材料层、环氧树脂层、金属层组成的复合薄圆板。
Piezoelectric bimorph, which consists of metal thin circular plate having PZT on both sides, is used as actuators of in pipe micro locomotive mechanism.
双压电膜是由压电材料层、环氧树脂层、金属层组成的复合薄圆板。
Piezoelectric bimorph, which consists of metal thin circular plate having PZT on both sides, is used as actuators of in pipe micro locomotive mechanism.
应用推荐