介绍了多种脱墨方法的结合对苯胺油墨印刷纸脱墨的影响。
The combination of deinking process for flexographic printing papers were introduced in this paper.
蓝版：减色彩印法的四张印版之一。它需用青蓝色墨印刷。
Blue printer: One of the four printing plates in a subtractive colour process which is to be printed in cyan ink.
磁墨字符识别：分辨用磁墨印刷的字符并把它转为数字资料的装置。
Devices which can identify characters printed in magnetic ink and convert them into digital data.
磁墨字符识别：分辨用磁墨印刷的字符并把它转为数字资料的装置。
Magnetic ink character recognition (MICR) : Devices which can identify characters printed in magnetic ink and convert them into digital data.
介绍了各种水基油墨印刷纸在国际上的使用概况，同时介绍了水基油墨印刷纸的识别方法及其可脱墨性。
The general conditions of application of waterbased ink printing paper in the world, the means of identification and the deinking ability of waterbased printing materials are introduced in the paper.
本文论述了金银墨印刷中几种主要效障，及引起这几种故障的原因，对于提高金银墨的印刷质量具有十分重要的指导意义。
The essay tells about several troubles of effecting metallic ink printing and its reasons. The essay has the most important direct significance for improving the quality of metallic ink printing.
其中国内喷墨印刷设备及材料自给能力低，国内喷墨印刷形成规模化地少，喷墨墨印刷设备开工时间低这三方面比较突出。
For example, ink-jet printing equipment and materials with low self-sufficiency, domestic ink-jet printing of small scale, ink-jet printing equipment start time low.
在四色印刷中，这给色彩对准带来大麻烦，因为每次只能用一种颜色的墨，需要精确校准以避免套色不准及图示不清。
That played havoc with the color register for four-color printing, since the ink, applied one color at a time, required pinpoint calibration to avoid badly aligned, muddy illustrations.
雕版印刷是用刀在一块块木板上雕刻成凸出来的反写字，然后再上墨，印到纸上。
Woodblock printing is a knife in a wooden block carved into the bulge to the anti-write, and then the ink, printed on paper.
雕版印刷是用在一块块木板上雕刻成凸出来的反写字，然后再上墨，印到纸上。
Woodblock printing is a knife in a wooden block carved into the bulge to the anti-write, and then the ink, printed on paper.
印刷电机使用变频器控制印刷速度，刮刀及覆墨刀可任意调节快慢，配合印件要求。
Printing tempo control by transducer, free adjustment by scraper and covering ink blade in accordance with the printing demands.
假如是在异动中放电，就可能在印品上出现“静电墨斑”，在层次的薄版印刷中常出现这种状况。
If the discharge in the transaction, it may be a static ink spot on the printed matter, this situation often appear in thin printing levels.
堆墨：积聚在印刷机的墨辊间，版面或胶布上的油墨颜料或纸粉团块。
Piling: the builup or agglomeration of ink pigment or paper dust on press rollers plates or blankets.
选用混合溶剂与适当树脂单体合成快干丝网印刷调墨油。
The quick drying screen printing varnish was made from the adaptable resin monomer and the mixed solvent.
意大利墨丝公司始建于1967年，在印刷设备制造方面处于世界领先地位。其设备主要应用于对各种材料，不同外形及尺寸的容器及物品进行直接装饰。
Since 1967, MOSS srl-Italy-is one of the world leading manufacturers of printing equipment for the direct decoration on containers and objects of different shape, size and material.
刮和回墨气缸切换，并且印刷压力大小可调；
Scraper and reclaiming knife cylinder change each other, moreover, the print pressure can adjust little.
水溶性墨：墨内颜料可溶于水者。应用于四色网印，橡胶版和凹版印刷。
Water-soluble inks: inks in which the pigments are soluble in water. used in screen process printing printing from rubber plates and in gravure.
主要研究了凹版印刷采用刮墨刀与印版滚筒相同和相反方向以及不同印版滚筒速度对网点增大值的影响。
The influence of different direction between plate cylinder and doctor blade, and different plate cylinder speed on dot gain in gravure printing was discussed.
墨槽：印刷机上贮存油墨和供应墨辊所需墨量的部份。
Ink duct: Part of printing machine which stores and supplies ink to the inking rollers. Also called ink fountain. Rom duct.
印刷油墨、书写或绘图墨水及其他墨类，不论是否固体或浓缩。
Printing ink, writing or drawing ink and other inks, whether or not concentrated or solid.
具有印刷速度快，刮墨压力和印刷行程便于调节，稳定性好等优点。
With printing quickly, scraper pressure and printing distance are easy to adjust, as well as good stability.
研究了印刷“墨斑”出现的成因，并提出了控制方法。
Then the method of controlling this problem is given, helping the packaging and printing enterprises improve product quality.
本文介绍了非接触性印刷废纸概况，研究了酶法和化学法脱墨的情况；
This paper introduces the general situations of non-impacted printed waste paper, investigates the complexion of enzymatic and chemical deinking.
印刷墨斑是影响印刷质量的因素中最具损害性的一个，要得到高品质的印刷品首先要解决墨斑问题。
Print mottle is one of the most detrimental factors to general print quality, and to get high quality print, the most important is to resolve print mottle problem.
丝网印刷的墨层厚，印刷的图文立体感强，是其它印刷方式无可比较拟的。
Screen printing, printing ink layer thickness of the graphic stereo sense is strong, is the other way is to compare the printing.
发泡墨：发泡印刷用的油墨。加热到某一温度时就会膨胀的油墨。
Blister ink: ink which will blister when heated to a certain temperature. Used FOR blister printing.
可以进行两次上墨移印一次，以便获得较多的印刷油墨。
May PAD printing with two add ink, so get the more printing ink.
印刷机油墨供给量对印刷质量有重要影响，通过分析印刷机输墨机构和控制方式，研制出微机墨量控制实验系统。
Based on ink supply's effect on printing production quality an through analysis of ink supply control method, PC controlled ink supply experimental system is developed.
可以对布质质、缎织、卷筒纸等作稳定高速印刷，墨层厚实，色牢度好。
It can make high speed printing for cloth, textile and rolling paper. The ink layer is thick and solid. The color duration is good.
可以对布质质、缎织、卷筒纸等作稳定高速印刷，墨层厚实，色牢度好。
It can make high speed printing for cloth, textile and rolling paper. The ink layer is thick and solid. The color duration is good.
应用推荐