因此，PEO可用作硝酸酯增塑推进剂的粘合剂。
Therefore, PEO can be used as the binder of nitrate ester plasticized propellants.
研究了磺化度和增塑剂对增塑体系的离子导电性的影响。
The influence of sulfonation degree and plasticizer to the ionic conduction of the systems was examined.
POSS对硅橡胶的增强效应、增塑效应取决于其分散结构。
The reinforcement of plasticizing effect or POSS was dependent on its dispersion structure.
凝胶化过程是增塑粘剂向PVC糊树脂颗粒内部扩散的过程。
The gelation of PVC paste is a process during which the plasticizer diffused into the particles of PVC paste resin.
掺混树脂的加入，可以大大降低增塑糊粘度，显著提高贮存稳定性。
The addition of blending resin can greatly decrease the visocity and dramatically increase the store stability of plasticized paste.
掺混树脂使增塑糊凝胶化温度升高并随掺混树脂的用量增加而增加。
In addition, the blending resin can increase the gelation temperature of plasticized paste and the latter went up with the increase of the former.
实验结果表明，增塑粉末挤压是生产小口径硬质合金管材的有效途径。
The experimental results showed, that plasticized powder extrusion is effective way to produce small cemented carbide pipes.
结果表明，增塑剂含量增加、增塑效率提高使涂层织物撕裂强度降低。
The results indicate that tearing strength of coated fabric decreases with the increase of the plasticizer concentration and plasticizing efficiency.
通过增塑和互穿，把具有流动性和可混性的SBS改性成了热熔胶粘剂。
Due to the plastication and interpenetration, SBS with mobility and miscibility were improved as a hot-melt adhesive.
灵活，增韧，增塑聚酰胺1010。它是紫外线和热稳定和多挤出应用。
Flexible, toughened, plasticized Polyamide 1010. It is UV and heat stabilized and suitable for multiple extrusion applications.
采用石蜡增塑高相对分子质量PE后纺丝并经高倍拉伸制备高强高模纤维。
A kind of high strength and high modulus fiber was prepared by melt spinning and drawing of high molecular weight polyethylene (HMWPE) plasticized by wax.
采用石蜡增塑高相对分子质量PE后纺丝并经高倍拉伸制备高强高模纤维。
A kind of high strength and high modulus fibre was prepared by means of plasticized melt spinning of high molecular weight polyethylene (HMWPE) with wax blend and high stretch ratio.
结果表明，LIR对NR/BR混炼胶有增塑作用，但增塑效果不如芳烃油；
The results showed that the plasticating effect of LIR on NR/BR blend was lower than that of aromatic oil;
结果建立了半刚性链纤维素衍生物增塑体系组分相容性界限与溶剂化参数间关系。
Results An equation relating the stoichiometry of solvation between solvents molecule and cellulose derivative to the limit of compatibility was established.
对以加入增塑剂的热塑性增塑方法进行了综述，并进一步探讨了淀粉塑化的机理。
This article reviews the thermoplastic modification of method to put into the plasticizer, and has probed into the mechanism of starch plastification further.
对聚氧化乙烯(peo)为粘合剂硝酸酯增塑的高能推进剂配方力学性能进行了研究。
The mechanical properties of propellants formulation, which contains PEO binder and is plasticized by nitrate ester were studied.
本文介绍了瓶盖内衬专用发泡增塑糊的生产，原材料选择及配方设计，以及加工工艺。
In this paper, raw material selection, formulation, and processing technology of plastisol for foamed bottle-cap liner were introduced.
因为有机添加物的灰份接近于零，用它们增塑时，不会影响高铝瓷烧结后的结构与性质。
Ash content of the additions is close to zero, therefore organic additions can't influence on the structure and property of sintered high-alumina ceramic material.
适合用于层压玻璃的复合中间层包括夹在第二和第三聚合物层之间的增塑聚乙烯醇缩丁醛层。
A composite interlayer suitable for using laminated glass includes a layer of plasticized polyvinyl butyral sandwiched between second and third polymeric layers.
从坯料配方、泥料制备工艺，特别是增塑剂的选择和应用方面论述了对骨灰瓷泥料增塑的途径。
In this article, we discussed the methods of Plasticizing of bone China mud in aspects of the raw materials, the processes of mud making especially in the plasticizer.
PET溶剂诱导结晶过程总体上可分为溶剂渗透扩散过程和PET被溶剂增塑后的结晶过程二个阶段。
The total process of solvent induced crystallization (SINC) includes two steps: the permeation-diffusion of solvent in PET and the crystallization of PET plasticized with solvent.
综述了聚丙烯腈纤维的熔融纺丝工艺，主要介绍了非增塑融纺的聚丙烯腈树脂及纤维的制备方法和性质。
We briefly describes the preparing and properties of the non - plasticate melt spinning PAN fibers as well as the resin that it made from.
经丙三醇增塑后，超微淀粉结晶度低达9.3%，其加工性能得到极大改善，可用于制备食品级生物降解包装膜。
After plasticised by glycerol, its crystallinity becomes 9.3%. In this way, the mechanical property of starch is improved and it can be applied to food package film.
还评价了其它技术性能，如回弹性和压缩永久变形，发现接枝硫化胶优于添加3 - 5份油增塑的NR硫化胶。
Other technical properties such as resilience and compression set have also been evaluated and are found to be better than 3-5 PHR oil plasticized NR vulcanizates.
高相对分子质量聚乙烯的增塑熔纺，由于聚合物浓度较高，大分子缠结多，纤维超拉伸比较困难，难以达到高强度。
Plasticized melt - spun HMWPE fiber is hard to draw to high strength because of high HMWPE content and more molecular tangle in as-spun fibers.
地下和地上排水和排污用塑料压力管道系统。未增塑聚氯乙烯(PVC- U)。第1部分：管道件和系统规范。
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly (vinyl chloride) (PVC-U) - Part 1: specifications for piping components and the system.
热塑性塑料阀门。压力试验方法和要求。第2部分：聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门试验条件和。
Thermoplastics valves - Pressure test methods and requirements - Part 2: test conditions and basic requirements for PE, PP, PVC-U and PVDF valves.
系统地阐述和分析了粉末增塑挤压技术和金属注射成型技术中的应用、原料、工艺原理等，并对两种技术的异同进行了分析比较。
The application, raw material, technological principle and other items of both powder extrusion molding and metal injection molding technology are analyzed and compared.
系统地阐述和分析了粉末增塑挤压技术和金属注射成型技术中的应用、原料、工艺原理等，并对两种技术的异同进行了分析比较。
The application, raw material, technological principle and other items of both powder extrusion molding and metal injection molding technology are analyzed and compared.
应用推荐