探讨复杂结构非线性动力弹塑性分析的手段和方法。
It explores the means and methods of the composite structure for nonlinear dynamic elastoplastic analysis.
对钢桥面铺装沥青混合料材料进行循环荷载下的弹塑性分析。
The elastoplastic properties of asphalt concrete of steel deck pavement are analyzed under cyclic load.
通过对金属筒体的弹塑性分析，推导出圆筒形壳体的耐压公式。
By elastic-plastic analyzing of metallic cylinder, a formulas of pressure resistance was derived.
本论文针对某实际工程运用静力弹塑性分析进行了分析及研究。
This thesis focuses on a practical engineering analysis using pushover analysis and research.
本文对取向硅钢片降低铁损的激光加工过程进行了热弹塑性分析。
The thermal and elastoplastic analysis in laser processing for lowering the core loss of the grain-oriented silicon steel sheets has been conducted in the paper.
事故工况下温度载荷对设备的影响采用了简化弹塑性分析的方法。
The simplified elastic-plastic analysis was used for the thermal expansion loading.
在热弹塑性分析中考虑了材料热物理和力学性能依赖于温度变化。
The variation of thermal - physical properties and mechanical properties of material with temperature is considered in the thermal - elastoplastic analysis.
该研究成果为基于BIM数据实现建筑抗震弹塑性分析提供了参考。
The research serves as a reference for structural seismic elastoplastic analysis based on BIM data.
建立各结构的平面协同分析模型后，对各个模型进行静力弹塑性分析。
After plane cooperating models for all structures were created, nonlinear static analysis for all models was carried out.
通过静力弹塑性分析找出结构的薄弱部位，并采取针对性的抗震加强措施。
By pushover analysis, the weak position of the structure was found out, and the corresponding strengthening measures were adopted.
弹丸发射强度的分析（尤其是弹塑性分析）是弹丸设计中有待解决的问题之一。
The strength analysis (especially elastoplastic analysis) of projectile on firing is one of the problems to be solved in projectile design.
静力弹塑性分析方法作为结构抗震性能的评估方法，近来受到广大学者的关注。
Lately, the static push-over analysis, POA, has been becoming popular as a simplified computer method for evaluating seismic performances of structures.
提出采用壳单元与环单元耦合的方法对带分流叶片整体离心叶轮进行弹塑性分析。
An approach for elastoplastic stress analysis of integrated impeller with splitter is presented in this paper.
应用动力弹塑性分析方法对高土石坝的地震反应特性和破坏机理进行了系统研究。
The main purpose is to study the seismic response and failure mechanism of high earth-rockfill dams under earthquakes by using dynamic elastoplastic methods.
在组合梁的计算理论中，作者分别详细地阐述了组合梁的弹性分析和塑性分析理论。
In terms of the calculating theories of the composite steel-concrete beam, the elastic analysis and the plastic analysis are expounded systematically.
基于性能的设计方法提出，使弹塑性分析地震反应方法得到地震工程界的广泛关注。
Basing on the performance based seismic design, nonlinear analysis has been widely caught attention in earthquake engineering.
进行弹塑性分析时，钢筋砼部分采用三线性滞回线，钢结构部分采用双线性滞回线。
In elastoplastic dynamic analysis, the trilinear loop for RC wall (or tube) and the bilinear loop for steel frame are adopted.
本文结合试验研究的成果，建立了新型空心螺栓球节点弹塑性分析的简化力学模型。
Combined with experimental results, a simplified mechanics model for the elastoplastic analyze of the new type of hollow ball bolted joint is built in the paper.
该温度场能够反映实际焊接过程的基本特征，可以作为焊接过程热弹塑性分析的依据。
The obtained transient temperature field can represent the basic characteristics of the real welding process and can be used as the foundation of thermal elastic-plastic analysis.
本文通过对塑性分析方法比较，采用了塑性弯矩系数和荷载系数来表达机构破坏荷载公式。
By comparing the ways of plastic analysis, the plastic moment coefficient and load coefficient are used to illustrate the collapsing load formula of mobile-structure.
本文基于能力谱方法对天然地基上带群桩基础的高层框架结构进行了平面静力弹塑性分析。
Capacity spectrum method was adopted to perform nonlinear static seismic response analysis for highrise frame structures with grouped pile foundation resting on natural foundation soils.
利用有限元法，采用弹性理想塑性模型，对受对称面外弯曲的内压弯管进行循环塑性分析。
Cyclic plastic strains are analyzed for the pressurized elbow subjected to symmetric out-of-plane bending with finite element method (FEM) and the assumption of elastic-perfectly plasticity (EPP).
本文采用有限元方法给出了单孔锚具的弹塑性分析结果，分析了摩擦系数对锚具性能的影响。
This paper presents the elastic plastic analysis results of mono strand anchor head by the finite element method.
进行了井下巷道地震反应的弹塑性分析，探讨了地震力作用下巷道围岩应力状态的变化规律。
The elastic-plasticity numerical analysis of a tunnel model which subjected to earthquake waves loads is done to study the tunnel surrounding rock's dynamic stress state.
文中讨论了该模型适用于全塑性分析的机理和判据，还设计了一个确定塑性极限载荷的算法。
In this paper the reason and criterion of the application of the model to plastic limit analysis are discussed, and an algorithm of computing plastic limit load is given.
现今，一种简单而有效的抗震能力评价工具——静力弹塑性分析方法受到了越来越多的重视。
Nowadays, a simple and effective method to evaluate aseismic capacity, Pushover method is paid attention to.
试验验证表明，用二次规划求解的强迫转角法是进行钢筋混凝土连续梁弹塑性分析的有效方法。
Some experiments show that the "imposed rotation method" derived from quadratic programming is a useful method in elastoplastic analysis of reinforced concrete continuous beams.
通过大量的弹塑性分析，提出了多层框架结构位移模式保持一致的条件和位移模式的确定方法。
By a great number of calculation and comparison, the displacement-pattern of frame structures is analyzed, and the consistent condition and definition method are provided.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
利用裂纹线场方法对岩石材料偏心裂纹板受剪应力作用时进行了弹塑性分析，并且获得了理论解。
The near crack line analysis method is used to investigate an eccentric crack loaded by shear forces in a finite plate, and the analytical solution are obtained.
应用推荐