桶形基础尺寸越小，动载荷响应越大。
The dynamic responses of the bucket with smaller size are heavier.
在工程实际中，当基础尺寸较小时，基底压力可当作直线分布，按材料力学公式简化计算。
In engineering practice, when a foundation size is small, the foundation pressure can be treated as linear distribution and simply calculated according to formulas of Mechanics of Materials.
基于离心模型试验结果，提出基础尺寸效应修正式和承压板尺寸换算式，对平板载荷试验结果进行修正。
According to the centrifugal test results, the corrected formulas of scale effect and plate size were introduced and the results of plate loading tests were modified.
沃伦的心理学应用的基础发现仍在发挥作用——被称为“兼容性的29个维度尺寸”，它被分为“核心特质”和“必须属性”。
Still, the foundational findings of Warren's psychology practice remain in place-the so-called "29 Dimensions of Compatibility," which have been divided into "Core Traits" and "Vital Attributes."
其中尺寸链自动生成是进行计算机辅助公差设计的基础，它所描述的设计函数是进行公差分析和公差综合的依据。
Among them the automatic generation of dimension chain is the foundation of CAT and the described design function offers basis of tolerance analysis and tolerance synthesis.
使用照片作为你的材质的基础来粗略的匹配最终材质贴图的尺寸。
Photos used for the basis of your texture should roughly match the final texture map size.
换句话说，基本额定动载荷提供了一个基于丝杠类型和尺寸来计算寿命的基础。
In other words, the Basic Dynamic Load Rating provides a basis of Life Calculations based on the size and type of ball screws.
推导了电荷泵的损耗和效率模型，为电路设计中确定电荷泵开关管的尺寸奠定基础。
It is the basis of computing the size of switch transistors to derive the model of the power dissipation and efficiency of charge pump.
在此基础上进行梁的结构设计尺寸改进，获得了改进后的结构参数，梁的重量减轻了18.23%。
Based on the results the structure size is improved and the deadweight is reduced by 18.23% for the improved structure parameters.
本文在三镜反射光学系统的几何光学理论基础上，尝试性进行了小尺寸、大视场、长焦距全反射系统的设计。
An all - reflective system with compact structure and wide field of view is designed on the basis of geometry optical theory.
在此基础上，仿真了空载和负载下的电机反电动势，并且对不同磁钢尺寸下的定位力矩进行了分析计算。
On this basis, back electromotive force without load and with load is researched, simulated and analyzed, and cogging torque is analyzed and calculated in different dimensions of magnetic steel.
新建筑紧凑的形式缩小了基础和室外墙的尺寸，也释放出很大一部分的土地，形成了一个户外训练区域。
The compact form of the new building reduces the size of the foundations and of the outside walls, freeing up a large part of the property and creating an outdoor training zone.
工艺尺寸链的解算是制定工艺的基础。
The resolving of dimension chain is the base of making craftwork.
准确地提取微型零件的边缘，为图像的精密尺寸检测奠定基础。
To accurately pick up the edge of subminiature accessory image, and build a well base for precise measure detection.
在此基础上建立了晶粒尺寸与工艺参数间关系的BP网络模型，进而以晶粒尺寸最小为目标对实际生产工艺进行了优化。
On this basis, a BP network model determining the relation between grain size and technological parameters is established, and the actual production technology has been optimized.
本文在大量试验研究的基础上，论述了介质的尺寸、形状及其级配对细磨的影响。
On the basis of the extensive experimental research, the effect of the medium size, type and stage matching on the fine grinding is discussed.
在并行fir的快速迭代短卷积算法(ISCA)基础上，采用多级小尺寸并行fir结构级联结构，实现了一种新型并行FIR滤波器。
A new parallel FIR filter based on the iterated short-convolution algorithms (ISCA) is designed with the structure of multi-stage small size parallel sub FIR filters.
为了改进PD C钻头设计，在全尺寸试验的基础上，对PD C钻头单齿切削过程进行了试验研究。
The single tooth cutting course of a PDC drilling bit is studied. The research is of great significance for improving PDC drilling bit design.
在此基础上，结合探测概率制定幅度门限，根据定位要求及目标尺寸，分析了脉冲个数门限的确定方法。
Then the amplitude threshold is established combined with detection probability. The method of ascertaining pulse number threshold is analyzed according to orientation requirement and target size.
并以此为基础，通过引入局部断裂能的概念，推导出与尺寸无关的混凝土断裂能表达式。
Based on the explanation, a model for size-independent fracture energy is provided by introducing a concept of local fracture energy.
在此基础上，为节约生产成本，对球磨机的关键尺寸进行优化，得出了优化方案。
On this foundation, essential sizes of the mill and the optimization plan in order to save production cost.
根据地基规范中柱下单独基础设计方法，通过理论推导，给出了这类基础底面尺寸、基础高度、基础底板弯矩的直接计算公式。
According to separate under-based design methods, the direct calculation formulae of the basic bottom size, the basic height, and the foundation slab moment are put.
由于纵、横墙体交叉处存在基础面积重叠问题，基础底面尺寸应作适当修正。
Because of the foundation area superposition in cross walls the foundation size should be revised.
在分析LED性能的基础上，设计了一种用于大尺寸直下式背光源的LED，新设计的LED结构简单，性能优良。
Based on analysing the performance of LED, a new LED for large area direct backlight for LCD is designed, which is simple and has a good performance.
在此基础上研究了波纹形状、腹板整体外形尺寸和钢腹板厚度等因素对波纹钢腹板剪切屈曲极限荷载和屈曲模态的影响。
On this basis, the influences of corrugation configuration, the overall dimensions and steel thickness of corrugated webs to ultimate shear bucking load and buckling mode are investigated.
采用电路映射地图进行环境建模，在等效尺寸的基础上对带拖车移动机器人的路径规划进行研究。
This paper presents a path planner in the way of circuit map for the tractor-trailer robots on the basis of equivalent size.
基础的尺寸和类型取决于地基的自然状况以及地基所承受的荷载。
The size and type of foundation depends on the nature of the ground and the load carried by it.
并在此基础上建立了贮藏类家具的基本构件尺寸设计的数学模型。
According to it, this article also models storing furniture with measurements of basic components.
并在此基础上建立了贮藏类家具的基本构件尺寸设计的数学模型。
According to it, this article also models storing furniture with measurements of basic components.
应用推荐