结合射流泵的设计理论和离心泵的汽蚀理论，确定了引射装置的引射回路和环形均布喷嘴轴向斜引射的引射装置基本设计方案。
Base on the theory of suction performance of centrifugal pump and design of jetting pump, the design of jetting loop and jetting device are given.
于是提出了一种能够适用于任何设计方案的基本方法。
A basic method is then presented that can be applied to any design decision.
本文将模糊评价法引入室内环境设计方案的优选过程，介绍了模糊评价法的基本原理和计算方法。
This paper applies vague overall evaluation for indoor environment design scheme optimization, and introduces the basal theory and calculation method.
介绍了铰接式装载机线控转向系统的基本原理与结构特点，提出了铰接式装载机线控转向系统总体设计方案。
Basic principle and structural features of cable-controlled steering system on articulate loader are described and its overall design scheme is presented.
两者的设计方案基本上一样，结构承重力也很强，所以都能抵挡住地震的冲击，而且比普通的高楼大厦所用的钢材还要少。
Both buildings are built to withstand major earthquakes while using far less steel than conventional skyscrapers.
文章给出总体设计方案，并阐述了相关算法和技术的基本思想。
The article gives design scheme in whole and expatiates on basic thought of relative algorithm and technique.
通过对光栅自动测试仪的基本测试原理进行分析，给出了测试仪的总体设计方案。
By analyzing the principle of grating auto testing, a general design of the instrument was given.
系统介绍了数字化的设计方案、基本原理及主要解决的技术问题。
The digitalization design plan and basic principle and main technique problems solved are systemically introduced.
初步估算或者称为概念方案阶段估价主要基于概念设计方案进行估算，此时只明确了最基本的技术方案。
A preliminary estimate or conceptual estimate is based on the conceptual design of the facility at the state when the basic technologies for the design are known.
介绍汽车电动玻璃升降器试验台（LB-1）的基本结构、工作原理及软硬件设计方案。
The basic structure, working principle and design project of software and hardware of the test-bed LB-1 for automotive electric glass-frame riser are introduced here.
使用本文提出的建模方法和设计方案构建的原型系统，能够满足虚拟教学实验的基本要求。
The prototyping system developed with the modeling method and design that this paper proposed can meet the basic requirements of virtual teaching experiments.
提出了一种以测量周期性信号有效值为基本功能的数字式多用表的设计方案。
This paper presents a design scheme of a digital multi meter for measuring periodical signals.
本文主要工作如下：(1)论述了双模态语音识别基本原理及相关技术，并提出了双模态车载语音控制仿真系统的设计方案。
The main works in this thesis as follow: 1 the basic knowledge of audio-visual speech recognition is studied, and the design is proposed for audio-visual vehicle control simulation system.
其基本思想是通过计算地震时经地面输入到结构体的势能，对不同设计方案的抗震性能做出评判。
The basic idea was that through seismic calculation, for the different design scheme evaluation could be made for seismic behavior imposed by potential transmitted to structural body from ground.
介绍了软件无线电的基本思想及结构，提出了一种基于可编程数字下变频器HSP50214B的中频软件无线电接收系统的设计方案。
The basic concept and architecture of software radio is introduced in this paper. And a type of software radio receiver based on programmable digital down converter (DDC) -hsp50214b is presented.
这些基本运算都可通过空间编码与解码的光学逻辑实现，从而提供了一种有效的光学算术-逻辑单元（ALU）设计方案。
The arithmetic is realized by logic operations and implemented by the spatial encoding technique, which offers an efficient design of optical arithmetic logic unit(ALU).
介绍了计算机增强型并行口epp协议的基本特点，给出了基于EPP协议的硬件加密卡的一种设计方案。
The article introduced the characteristics of Enhanced Parallel Port of the computer and gave a design of the hardware encrypt card based on EPP.
分析了原进口焊缝烘炉的基本结构和失效原因，介绍了新的焊缝烘炉的设计方案和结构特点。
The structure of a kind of imported seam welding electric oven and its failure reasons were analyzed. A new improved design for this kind of electric oven was introduced.
介绍了DSP处理器的基本结构和性能，给出了感应电机矢量控制的硬件设计方案和软件控制算法。
Introduction was made to basic structure and performance of DSP chip, giving out hardware design plan for induction motor vector control plan, software control algorithm.
首先介绍了神经网络的基本概念，接着给出了神经网络的具体结构和输入输出单元的设计方案。
First, the basic concept of nerve net has been introduced. And then the detail structure of the BP nerve net and the detail design precept of input and output layer have been given.
介绍了ENET - GPIB控制器的基本原理，设计方案和实现。
The basic principle, design project and realization of the controller are introduced principally.
提出了以成组技术为基本原理的柔性分色线调度系统设计方案；
The project of the color selection storage system was based on the group technology.
最后，提出了一种以交织块为基本单元进行数据调制的系统设计方案。
Lastly, this paper gives a method to modulate fast and accurately by using the interweaver as the basic unit of modulation.
通过分析传统数据库开发模式的不足，提出数据库连接池技术，并对其基本模型和设计方案进行探讨。
By analyzing the shortage of traditional data base developing mode, it refers data base connection pool skill, and discuss its basic model and design method.
目前基于本论文设计方案的多媒体文件分组上传系统的基本功能已经实现，运行表明系统总体方案设计是合理的。
Currently, the basic functions of multimedia batch files uploading system based on scheme of this paper have been realized, overall scheme is reasonable through running.
实验的基本完成代表该设计方案的合理性但还有很多地方需加以改进。
Experimental behalf of the completion of the basic design is reasonable but there are many other areas to be improved.
应用有限元方法来验证设计方案的合理性，模拟结果与工程实践基本吻合。
The FEM method was adopted to verify the rationality of the design program. The situation results confirmed with engineering practice.
论文首先介绍了超声波测距的基本原理，随后对几种可性的方案进行了方案论证，确定最后的设计方案，并对整个的设计方案作了详细的介绍。
Papers first introduced the Ultrasonic Ranging basic principles, be followed demonstrate several of the plan, and determine the final design, finally describe entire design in detail.
在进行经济技术性分析后，最终确定风机的设计方案，进而确定通风机适当的级型式、叶轮尺寸、轮毂比、转速和叶片数等基本参数。
Final design scheme is confirmed after economic and technical analyse. Then, axial fan 's stage type, impeller diameter, hub ratio , specific speed and the number of blades are decided.
在进行经济技术性分析后，最终确定风机的设计方案，进而确定通风机适当的级型式、叶轮尺寸、轮毂比、转速和叶片数等基本参数。
Final design scheme is confirmed after economic and technical analyse. Then, axial fan 's stage type, impeller diameter, hub ratio , specific speed and the number of blades are decided.
应用推荐