螺杆泵生产的关键是螺杆的加工，而成型刀具的型线计算又是螺杆加工的关键。
The process of screw spindle is the key of producing screw spindle pump, but the calculation of shaped cutting tool is still the crux of process of screw spindle.
首选应用是轴承结构，包括滚珠和轴套。还有，它也能用来做刀具、针形阀、球型止回阀、阀门基座、泵零件、球头螺栓、轴套、抗磨损纺织机械。
In addition, it should be considered for cutlery, needle valves, ball check valves, valve seats, pump parts, ball studs, bushings, and wear-resistant textile components.
粗车刀具按其进给方向可以是右手型的或是左手型的。
Rough turning tools can be right-hand or left-hand types, depending upon the direction of feed.
针对复杂型面刀具的设计要求和结构特点，研究开发了一种基于点采集的高精度非接触式激光扫描测量系统。
Aiming at the design demand and structure character of complex surface tools, a high precision non-touching laser scanning system based on point sampling was studied and developed.
仿型刨削和牛头刨削用单刃刀具加工平面。
Shaping and planing produce flat surfaces with a single-point cutting tool.
在采用本文介绍的最新刀片槽型和CBN刀具牌号后，获得了良好的加工优势。
The newest insert geometries and CBN tool grades introduced in this article offer machining advantages.
介绍了某型含钢骨架橡胶封条的铣削切断加工刀具、夹具及工艺参数。
These tool, fixture and machining parameters were applied to a production line for sealing strips of a certain type of car.
提出了对称型双向分布的梯度功能陶瓷刀具材料的设计模型。
A model for designing functionally gradient ceramic tool materials with symmetrical composition distribution is presented.
该系统实现了小尺寸复杂型面的高精度测量，在精密刀具等小尺寸复杂型面零件的逆向工程中具有极大的应用价值。
The scanning system can realize high precision measurement of small size complex surface and can be applied in the reverse engineering and development of (advanced) machining tools.
其切削力平稳的特性更适合于模具型腔的高速数控加工，可以克服高速加工用刀具刚性差的不足。
The cutters used in high speed machining(HSM) have poor rigidity, therefore the method fits to HSM of die cavity due to the unfluctuating cutting force characteristic.
以去除金属量最少为目标函数，建立了单排刀具和多排刀具的V型铣削去重模型。并开发了两种去重方式的智能规划系统。
Minimum removed metal is taken as object, single cutter and multi-cutter V-milling correction model was build Intelligent programming system of the two methods was developed.
探讨了中断型宏指令功能在刀具破损在线监控系统中的应用。
The application of interruption type custom macro function on the on-line monitoring system was discussed.
上述研究成果为解决自动化生产中刀具破损问题及槽型优选技术的研究打下理论与试验基础。
All these studies provide the theoretic and experimental bases for solving the cutter disrepair which is the key problem in the automatization production and groove optimization.
高质量：生产的刀具，刀面有很好的光洁度，刀型漂亮美观，经久耐用。
High quality: The Cutters has a very good smooth finish, beautiful shape, and durable which are produced by this equipment.
探讨中断型宏指令功能在刀具破损在线监控系统中的应用。
The application to the on-line monitoring system of interruption type custom macro function is discussed.
提出了模具型腔粗铣加工刀具组合方法，进行了粗铣加工走刀方式对比分析。
The paper offered the coarse milling machining combination methods of mold cavities, and contrasted and analyzed them.
从等距型面轴曲线轮廓特点出发，研究了等距型面的曲线方程，尝试对磨床进行改装，给磨床安装一附件进行合理的运动分配，使工件与刀具完成协调运动，加工出等距型面轴。
We try to refit grinding machine and install an attachment which can do reasonable distribution of the movement so that workpiece and cutting tool complete coordinated movements.
试验结果表明：采用小直径刀具，合适的工艺参数，次摆线分层走刀方式能加工出高质量的型腔表面。
The experimental results showed that high quality of cavity surface can be obtained by using appropriate technologic parameter and trochoidal milling mode with micro-end mill cutter.
整体式铣刀刀具主要用于叶根型线的精加工及小叶根型线的粗加工。
The integral-type milling cutter is mainly used for fine machining of a leaf-root profile and rough machining of a small leaf-root profile.
本文介绍了如何利用一些特殊的工装、刀具在简易的专用机床上加工该内型腔的方法。
So, machining the cavity is quite a task, in the paper we present a method for shaping the cavity with some special toolings on a simple special-purpose machine tool.
为了有效的进行刀具状态监测，采用小波神经网络的松散型结合对刀具进行故障诊断。
In order to improve cutting tool condition monitoring, a method of cutting tool fault diagnosis based on wavelet and artificial networks with relaxed structure is proposed in this paper.
二维组合曲线的等距方法是CAD/CAM领域中的一个重要课题，并在型腔环切加工刀具轨迹自动生成技术中得到广泛研究。
The offsetting technology of 2D-compound curve is a basic problem in CAD/CAM, and has been widely studied in tool path generation for pocket machining.
本文论证了铣刀刃磨过程中刀具刃磨对铣刀轮廓型线的精度不受影响，证明了高精度燃机轮槽的铣削加工是切实可行的。
It proves that the precision of milling cutter profile may not be affected in the milling process and is achievable to mill disc groove with...
型刨削和牛头刨削用单刃刀具加工平面。
Shaping and planing produce flat surfaces with a single-point cutting tool.
近年来硬质合金刀具材料性能的提高，使得具有槽型的刀片被广泛应用到自动化生产中。
These years the improve of the inert material capabilities make the milling insert with 3d groove be used to automatic production.
在球面刀具干涉处理算法的基础上 ，对模具型腔自由曲面NC三轴加工中平头刀的刀具轨迹的干涉处理技术进行了分析。
The interference problems and existing methods in 3 axis NC machining of surfaces are analyzed, and a new strategy of interference detection is proposed.
在球面刀具干涉处理算法的基础上 ，对模具型腔自由曲面NC三轴加工中平头刀的刀具轨迹的干涉处理技术进行了分析。
The interference problems and existing methods in 3 axis NC machining of surfaces are analyzed, and a new strategy of interference detection is proposed.
应用推荐