在吸附式制冷系统中，回热过程起到了重要作用。
Heat recovery processes have an important role in increasing the performance of system.
在电阻炉的换热过程中效果往往会不甚理想，所以怎样提升电阻炉换热效果是一个需要探讨的问题。
In the process of resistance furnace heat transfer, the effect is often not ideal, so how to improve the heat transfer effect is a problem to be discussed.
本文讨论了直接加热器在糖厂使用对糖厂热力经济的影响，介绍了直接加热过程蒸汽消耗的数量分析方法和计算公式。
In this paper the effect of using direct heater on heat economy of sugar factories is discussed, also the quantity analysis method and calculation equations for vapor consumption are introduced.
将DEM方法与颗粒碰撞传热模型结合，在颗粒层次上对密相流化床内的传热过程进行了较为系统的数值研究。
Combining with particle impact heat transfer model, DEM method is also used to systematically simulate the heat transfer process in fluidized bed at the level of particle.
之前广泛报道的关于覆盖航天飞机腹部的隔热瓦出现凹槽的问题并没有影响航天飞机返航，同时也没有关于航天飞机在大气层经受炽热过程中出现异常情况的报道。
The much-publicized hole in the protective tiles covering the shuttle's underbelly did not impact the vehicle's reentry and no unusual conditions were reported during the period of maximum heating.
幸运的是，虽然价格昂贵，但“牛奶衣”不会过期，在加热过程中，分子的结合使蛋白质不会分解。
Luckily, for that kind of money, the clothes don't come with an expiration date — during the heating process, the molecules bind in such a way that the protein won't decompose.
收缩薄膜在烘道式收缩包装机中的加热过程具有动态性质。
The film shrinkage in heating process in shrink packaging machine is of dynamic nature.
绿色蔬菜中的叶绿素在酸性条件下，或在加热过程中容易褪色。
The chlorophyll in green vegetables easily fades out in acid condition or when being heated.
对选择性激光烧结(SLS)加热的研究多数集中在烧结过程上，而对预热过程的研究还很不完善。
The research of heating in selective laser sintering (SLS) of powders mostly focuses on the sintering process, but the research of the preheating process is not sufficient.
但硫酸钠水合盐在相变蓄热过程中，存在相分离，过冷等问题。
But it has the problems of phase segregation and supercooling during the phase change process.
利用电阻炉加热，采用电子显微镜及图象分析仪，研究了近液相线铸造a 356铝合金在二次加热过程中的组织变化。
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
淀粉凝胶化是水中淀粉粒在加热过程中，淀粉颗粒内部结构由有序状态转变为无序状态。
The gelatinization of starches means that the inner structure of starch grains in water during heating will change from order states to disorder.
对硅溶胶在加热过程中的变化及其在透气性金属陶瓷材料中的作用进行了一些试验分析。
The change of the colloidal silicate in heating and its action on permeable cermet have been investigated and compared with the ethyl silicate binder.
UF与麦秸混合物在加热过程中，两者之间的胶合热反应不明显。
In the course of heating wheat straw and UF the gluing reaction is not evidence between them.
本文就模压料在模具中加热过程和达到固化温度以后的传热过程进行定量分析，以确定合理的工艺控制参数。
In order to determine reasonable processing parameters, heating of thermosetting molding compound in the mold and that of heat transfer after curing temperature are analyzed.
本文讨论了涂层材料在加热过程中出现的三层结构的吸热机理，建立不同层反映不同功能的守恒方程。
The thermal protection mechanism of three layer for coating material under heating process was discussed, the conservation equations which reflects difference function was established.
在传热过程中，由于翅片管可提高传热效率，已在换热器中得到广泛的应用。
Finned tubes are widely used in heat-exchangers due to high efficiency in the process of heat transfer.
在详细分析钢坯出炉后热过程特点的基础上，建立了线材控冷轧制热过程数学模型。
The mathematical model of wire cool controlled rolling based on the analysis of thermal process of billet after being discharged is established.
在研究玻璃加热过程时，传动辊释放出的辐射热是个非常重要的因素，其大小与传动辊的温度有关，影响着钢化玻璃的质量。
When studying the process of heating glass, radiation coming from the conveying roller is a factor of vital importance, and it affects the quality of tempered glass.
在电渣加热过程中，渣池中的电场、电位和电流密度都是影响渣池中金属表层温度场的主要因素。
Electric field, voltage and current density of the slag pool in the electro-slag heating process are the main influencing factors of temperature field in the metal surface.
多层圆管结构在不稳定导热过程中的温度场及其热应力状态，关系到结构的安全可靠性。
The temperature field and the thermal stress state of multilayer Wall pipe have a heavy effect on the reliability of structure.
所幸的是，如此价格的衣服并没有“终止使用日期”。在加热过程中，分子会以一种方式组合从而避免蛋白质腐烂。
Luckily, for that kind of money, the clothes don't come with an expiry date — during the heating process, the molecules bind in such a way that the protein won't decompose.
目前，在锻造等热塑性成形生成过程中常采用快速加热和介质保护加热等方式来减少和防止坯料在加热过程中的氧化。
At present, quick heating or medium protected heating to reduce or prevent oxidation during heating are often used in the process of thermo-plastic forming such as forging.
在第一部分中，作者讨论了传热过程的理论基础。
In the first part, the authors discuss the theoretical basis for the heat transfer process.
在加热过程中，胶层粘度随温度和时间的变化可用二重指数方程描述。
The viscosity change of a glue line with temperature and time could be described qualitatively by a dual equation.
热层：加热过程，密度增长，在高纬的扩张。
Thermosphere: Heating, density increase, expansion at high latitude.
钢坯在加热炉的加热过程是影响设备运行和产品质量的关键环节。
The process of heating steel billets in the heating furnace is a key link of influencing equipment operating and product quality.
另外，借助有限元软件来模拟复合材料在吸热过程中温度及热梯度场的分布情况，对实际生产有一定的参考价值。
Simulated the distributing condition of temperature and heat grads of the compound material by ansys software that is definitely a reference for practice production.
本研究采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。
During heating, phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.
本研究采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。
During heating, phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.
应用推荐