太阳敏感器的测量精度主要受地球反照的影响。
The measurement accuracy of sun sensor is mainly influenced by earth albedo.
并改进了微型组件制造商通常使用的模拟器的测量精度。
We also improved the accuracy of measurement by the simulator, which is often used by the mini-module manufacturers.
采用拉压力传感器作为扭矩测量元件，提高了测功器的测量精度。
Using the tension-compression sensor as a measuring element of torque, the measuring, precision of dynamometer was raised.
通过对一种毫米波辐射器的测量和计算对测量算法进行了整体检验。
The measurement algorithm is fully tested with the measurement and calculation carried out for a MMW irradiator.
为了提高光学电压互感器的测量精度，提出了提高其稳定性的方法。
In order to raise the precision of measurement, a method for improving stability of Optical Potential Transformers is proposed in this paper.
用DD 8000多道分析器和3路计数器的测量验证了它的可靠性。
The experiment reliability is verified by the measurement of DD8000 type multichannel analyser and 3-routes counter.
在高压电力系统中，为了提高电压互感器的测量准确度，必须减小误差。
In high voltage power system, in order to raise measurement accuracy, errors must be reduced.
本文介绍这种新型传感器的测量原理，基本结构、误差分析和测试结果。
The measuring approach, basic configuration, error analyses and measurement results of the load cell are described in this paper.
本文介绍了一种新型红外温度传感器的测量原理、设计制作和实验结果。
The measurement principle, design, fabrication and experimental results of a novel infrared thermometer sensor are presented in this paper.
介绍了采用负温度系数热敏电阻器为检测元件的风速传感器的测量原理；
The measuring principle of a wind speed sensor which employs a negative temperature coefficient (NTC) thermistor as detector is described.
为了提高传感器的测量精度，研究了六维力传感器标定矩阵的构造方法。
In order to improve the measuring precision of the sensor, the constructing method of the six-dimensions force sensor's calibration matrix is studied.
试验表明，该方法扩大了光纤式结冰传感器的测量范围和提高了测量精度。
The experiment results show that the method can largely wide the measuring range and enhance the measuring accuracy.
该传感器的测量原理和单片机的软硬设计通过测试，其精度达到预期的结果。
The measuring principle of the synthetic sensor, the design of software and hardware of the single-chip computer have been tested. And it 's precision has achieved the expected result.
设计采用超声波检测水位信息，分析矿用超声波传感器的测量原理与技术特点。
Adopting the designed ultrasonic transducer to detect water level, measuring principle and technical features of ultrasonic transducer used in mine were analyze.
为进一步提高光纤传感器的测量精度和线性范围，本文还研究了光强补偿算法。
An intensity compensation algorithm is studied to increase the precision and linear range of optical fiber sensors further.
根据航空发动机转速传感器的测量原理，提出一种基于DSP的智能转速传感器。
According to the measuring principle of aeroengine rotating speed sensor, an aeroengine smart rotating speed sensor based on DSP was proposed.
应检查控制器的测量电流和测量电压的对应关系，测量电流与测量电压应为同相。
Check the corresponding relationship between metering current and metering voltage of controller, the metering current and the metering voltage should be in-phase.
基于同轴圆柱电容式传感器的测量原理，建立了用于固态物含水率测量的数学模型；
Mathematical model for measuring moisture in solid substance is presented based on the operating principle of a cylindrical capacitance type sensor.
数据级融合模块主要对多传感器的测量信号进行处理，提取出故障诊断的特征信息。
The data fusion level module mainly handles the metrical data of multi-sensors and extracts the feature of faults.
从中得到了一些有益结论，可进一步改善积分环节，提高电子电流互感器的测量精度。
Some beneficial conclusions are gained, which can improve the integral circuit further, the measurement accuracy of electronic current transducers is improved?
本论文基于虚拟仪器概念，组建和开发了压力脉冲固态发酵反应器的测量和控制系统。
This thesis deals with the development of novel SSF bioreactor with air pressure pulsation. Measurement and control software was developed under virtual instrument concept.
本文对d系列老式水力测功器的测量精度进行了分析，提出了改造测功器的措施和方法。
The measuring precision on D-series hydraulic dynamometer was analysed, and the measures and methods were developed in this paper.
由于光纤传感器中存在交叉灵敏度，阐释传感器的测量及其相互关系是一个重要的课题。
Because there is the cross sensitivity in optical fiber sensor, it is an important task to explain the measurements of sensors and their relationship.
振弦式传感器被测力与输出频率之间是一种非线性关系，它严重影响了传感器的测量性能。
The nonlinear relation between the measured force and the frequency of vibrating wire sensor always severely affects the measured performance.
论述了用于电力系统状态监测的光纤电场传感器的测量原理，给出了测量系统的光路结构。
This paper describes the measuring principle of optical fiber electrical field transducer used for condition monitor of electric power system, and gives the structure of the measuring system.
实验表明：该方法简化了设计，提高了传感器的测量精度和通用性，有利于工程的实际应用。
The experiment shows that this method not only simplifies design, improves measurement precision and generality of sensor, but also is suitable for the application.
分析现有各种水准测量方法的特点，结合电子直线加速器的测量实践，提出短距水准测量的概念。
This paper analyzes the character of several level methods and brings forward the concept of short-distance leveling according to the measurement practice of LINAC.
为了保证电力故障录波器的测量精度，提出了一种基于线性最小二乘原理的录波器通道校正方法。
To ensure the measurement precision of the electric power fault recorder, this paper proposes a channel calibration approach based on the linear least square method.
由于受到温度、磁场等外界因素的干扰，汽车传感器的测量精度降低，致使汽车的整体性能下降。
Owing to the interference by the temperature and magnetic field, the measurable precision of automobile sensor drops greatly, and then results in the decline of the whole function.
由于受到温度、磁场等外界因素的干扰，汽车传感器的测量精度降低，致使汽车的整体性能下降。
Owing to the interference by the temperature and magnetic field, the measurable precision of automobile sensor drops greatly, and then results in the decline of the whole function.
应用推荐