将超声波应用于锡铈合金电镀。
研究了超声波对锡铋合金电镀的影响。
The effects of ultrasonic on the tin-bismuth alloy electroplating are studied.
简述了铝及其合金电镀前处理的常见工艺。
Common pre-plating processes for aluminum and its alloy were introduced briefly.
如何使其正移是实现稀土合金电镀的关键。
The effect of complex agent on the electrodeposition of rare earth alloys was studied.
研制了一种锌基合金电镀添加剂ea - 2。
Additive EA-2 for zinc based alloy electroplating was synthesized.
碱性锌钴合金电镀常采用锌阳极和低碳钢阳极。
Soluble zinc and insoluble low carbon steel anodes are used for alkaline zinc-cobalt plating.
本文介绍了几种取代氰化镀铜的锌合金电镀打底工艺。
The paper provides several substrate plating technologies of zinc alloy cast piecework to substitute cyanide copper plating.
锌基合金电镀层由于具有优良的耐蚀性而受到人们的关注。
Zinc based alloy electrodeposits have been emphasized for their excellent corrosion resistance.
综述了铁系锌基合金电镀的研究应用现状以及工艺的重要影响因素。
Current status and important influence factors of electroplating iron family metal containing zinc alloys are reviewed.
本文简要介绍锡铈镍合金电镀工艺。本工艺镀液稳定，电镀层质量好。
This text simply introduce the technology for Sn-Ce-Ni alloy electroplating. Plating solution is stable. Coat quality is good.
此法已被成功应用于测定锡-铜-铅合金电镀液及其镀层中的锡、铜和铅。
Cu and Pb ions in the alloy plating bath and composition of its deposits.
研究了一种新型可焊性光亮锡锑合金电镀工艺的镀液配方和电镀操作条件；
A new electroplating technology of solderable bright Sn-Sb alloy of bath components and operating conditions were studied.
在铝合金电镀件表面形成镀层厚度均匀，镀层外观光亮，并且能够实现批量生产。
The plating formed on the surface of the aluminum alloy galvanized component has even thickness and glaring appearance, and mass production can be realized.
在电镀过程中，镀液主盐离子浓度的变化对镀层的影响极大，对合金电镀更是如此。
The variation of concentration of main salt in electrolyte affects the quality of metal coating obviously, and it is for alloy plating coating as well.
MLCI端头电极锡-铅合金电镀工艺及维护、镀后的清洗、MLCI的储存影响镀层的耐焊性和可焊性。
Solderability of Sn Pb alloy deposit is determined by electroplating process and its maintenance, post treatment rinsing, storage of MLCI, etc.
最后还对合金电镀在防腐装饰、磁性合金、电子元件、减磨耐磨等四个领域中的应用和进展作了概括的总结。
And finally, the author also gives a brief account of the application and progress of alloy plating in four areas, that are decoration, magnetic materials, electronic component and wear resistance.
本文总结了自1960年以来合金电镀方面的成就，详细论述了合金电镀的五大特点和四种类型的平衡状态图。
The achievements in alloy plating since 1960 is briefly summarized. Five main features of alloy plating and four types of equilibrium diagrams are illustrated.
总结了合金电镀中出现反常现象的五种主要原因，并详细介绍了异常共析和诱导共析这两种合金电析中的特异现象。
Five essential causes resulting the abnormal phenomena in alloy plating such as anomalous codeposition and induced codeposition are explained in detail.
为了保持基体金属硬度、磁性以及电镀层性能等均不变，将锌铁合金电镀工艺与磷化工艺进行了组合，以提高钢铁件的防护性能。
Holding primary hardness, magnetism and plating properties of matrix, protection performance of steel was improved by combining the Zn - Fe alloy electroplating and phosphating technology.
介绍了不锈钢基材电镀镍钼合金的全部工艺过程，并讨论了前处理、锌酸盐镀锌作底层和钼合金电镀等过程因素对本工艺实施的影响。
The process of Ni-Mo plating of stainless steel is introduced in detail. The effects of pretreatment, Zincate Zn pre-plating and process factors on-the technology are also discussed.
电镀：利用电解原理，使金属或合金沉积在制件表面，形成均匀、致密、结合力良好的金属层的过程。
Electroplating: use the principle of electrolysis, the metal and alloy parts deposition in the surface, form even, density, good adhesion of the metal layer process.
因此，电镀非晶态合金已引起人们的极大关注。
Therefore, amorphous alloy plating has aroused people's attention.
在铍青铜合金上电镀铝，需在镀铝前作特殊的表面活化处理，镀铬时也有不同于钢铁件镀铬的操作方法。
Special treatment is recommended to activate beryllium copper surface before chromium plating. And special steps which differ from conventional chromium plating on steel parts are to be taken.
当铜合金表面的电镀纯铜层厚度超过一个临界值，表面电镀纯铜处理可以明显改善材料的耐氧化剥离性。
As the electroplating pure copper layer on copper alloy exceeds a critical thickness, the surface electroplating treatment can improve the copper alloy's resistance against oxidation failure greatly.
氢脆：由于浸蚀，除油或电镀等过程中金属或合金吸收氢原子而引起的脆性。
Hydrogen brittleness: because, in addition to the erosion oil or plating process such as metal and alloy hydrogen atom absorption and cause brittle.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
介绍采用A - 1添加剂进行黑镍(镍钼合金)电镀的简便工艺。
A simple technology applying A-1 additive to Ni-Mo alloy plating is introduced in this article.
镉离子主要来源于电镀、电池、合金制造、颜料、采矿与选矿行业排放的工业废水。
Cadmium ion mainly comes from industrial waste water discharged by electroplating, battery, alloy manufacturing, pigment, mining and refining process.
镉离子主要来源于电镀、电池、合金制造、颜料、采矿与选矿行业排放的工业废水。
Cadmium ion mainly comes from industrial waste water discharged by electroplating, battery, alloy manufacturing, pigment, mining and refining process.
应用推荐