裸线式电热元件通常用镍铬合金丝制成。
The open wire heating elements are usually made of nichrome wire.
请见下表为我们的合金丝的形式提供的细节。
Please see table below for details of our alloys available in wire form.
健合金丝、金耙材(制造)；蒸发金(销售)。
Kin alloy silk, gold rake thin (manufacturing); Evaporation gold (sales).
对不同变形量的合金丝进行了再结晶退火试验。
The recrystallization behaviours of Ta-Ti alloy wires with various deformation degrees were studied.
该复合金属丝由内层合金丝与外层电镀铬组成。
It belongs to a new material to deeply work float glass and consists of alloy tinsel inner layer and electroplated chrome outer layer.
材质：选用低碳钢丝、铝镁合金丝编织焊接而成。
Material: Be woven or welded with low carbon steel wire and al-mg wire.
随退火温度升高，合金丝电阻率下降，热电势升高。
As the annealing temperature rises, the resistivity of alloyed wire reduced and thermal potential raised.
本文介绍了稀有金属合金丝材拉丝用的快速加热电炉。
The article introduces a furnace for fast heating of rare alloy wires during drawn.
几种合金丝在疲劳断裂前，回复率一直保持为100%。
The recovery rates of all wires keep up 100% before fatigue rupture.
该垫片由金属合金丝增强高温基布，涂覆耐高温的胶涂料。
The gasket enhanced by the high-temperature metal alloy wire fabric, coated with high temperature resistant plastic coating.
钽及钽钨合金丝主要用于医学植入、高温炉加热元器件等。
Tantalum and tantalum-tungsten wires are used in medical implantation or working as heating elements in high temperature furnaces.
使用自制的威德曼效应测量仪测量铁镍合金丝的威德曼效应。
The Wiedemann effect of Fe-Ni alloy wires were measured by a self-made apparatus.
材料：低碳钢丝、铝镁合金丝。纺织及特点：编织焊接而成。
Material: low carbon steel wire, aluminum magnesium alloy wire. Textile and characteristics: weaving and welding.
它可以同时加热合金丝与拉丝模，并使它们分别获得不同的温度。
It can heat wires and its die at the same time and can give them different temperature.
材料为碳钢及低合金丝材，使涂层有较高的耐磨性，且价格较低。
Materials for the carbon steel and low alloy wire, so that the coating has high wear resistance, and lower prices.
由这个公式和临界冷却速度还能决定出非晶态合金丝带的最大厚度。
The maximum thickness of amorphous alloy ribbons can also be determined by this formula and the critical cooling rate.
研究表明：随变形量的增加，合金丝的电阻率升高，上述热电势降低。
The study shows that the resistivity of alloyed wire raised and thermal potential reduced with the increase of deformation.
裸带式元件也和裸线式元件一样以镍铬合金丝制成并以同样方式绝缘。
The open ribbon elements are also made of nichrome wire and are insulated in the same manner as the open wire elements.
热喷涂处理采用以金属或合金丝材为喷涂原料高速燃气电弧热喷涂法。
The thermal spraying treatment adopts a high-speed gas arc thermal spraying method which takes metal or an alloy wire as a spraying raw material.
该实用新型的特点是在一个合金丝是用来作为传感元件，这是他们与春天。
The utility model is characterized in that an alloy wire is used as a sensing element which is connected with a spring.
钽丝、钽钨合金丝主要用于医学植入元件、高温炉加热元件、防腐织网等。
Tantalum wire and tantalum-tungsten wire are mainly used as medical implanting elements, heating elements in high temperature furnace, anticorrosive nets.
材质：PV C丝，不锈钢丝，优质低碳钢丝，镀锌丝，铁丝，铝合金丝等。
Material: PVC wire, stainless steel wire, high quality low carbon steel wire, galvanized wire, iron wire, aluminium wire etc.
在实验范围内，施加的脉冲电流频率增加时，拉拔力降低，合金丝的延伸率增加。
The drawing force decreases and the specific elongation increases when the frequency of pulse current exerting to wire adds in the scope of experiments.
本文研究了利用具有近零磁致伸缩系数钴基非晶态合金丝研制的新型磁场传感器。
A new type magnetic sensor using near-zero magnetostriction cobalt-based amorphous wire was studied in the paper.
加热元件的由高电阻合金丝绕制成螺旋状，安置在炉膛二侧，炉底后墙及炉门上。
The heating element is screwed up by high resistance alloy wires and installed on the hearth's two sides, the rear wall of the furnace bottom and the furnace door.
当绝对真空度一定时，A356铝合金丝材的吸铸长度随充型温度的升高而增大。
With a fixed the absolute vacuum, the length of the A356 aluminum alloy wire is increased with the increase of the filling temperature.
结果表明：火焰喷涂镍铝合金丝时飞行粒子热焓高，在基体表面粒子的变形量大。
The results show that particles is of high enthalpy, and show greater deformation on the substrate in the flame spraying process of nickel-aluminum alloy wire.
试验包括形状记忆合金丝的本构试验、疲劳试验和形状记忆合金阻尼器的性能试验。
The whole tests include SMA line constitutive test and fatigue test and cone SMA damper performance test.
对涂膜下铝合金丝状腐蚀的几个特点、类型、形成过程和影响因素进行了分析和讨论。
The type, the characteristics, the formation process, and the influencing factors of filiform corrosion were analyzed and discussed.
合金丝试样中部为变形磨损，侧面为微切削磨损，表现为典型的韧性材料冲蚀磨损特性。
The surface morphologies exhibit deformation wear in the middle and micro cutting wear in the sides, which indicate that all the samples exhibit ductile material characteristics in the erosion.
应用推荐