通过工程处理，解决了网架变形问题。
The problems of grid structure deformation have been solved by project treatment.
薄纸在制卡和会员卡制作中为什么会发生涨缩变形问题？
Tissue paper in cards and membership cards in the making of why mandrel deformation?
结构框体零件切削加工中腹板变形问题进行了分析研究。
This paper mainly studied the machining deformations of the thin-web structure components in end milling.
采用有限元模拟技术研究航空薄壁弧形结构件加工变形问题。
The machining deformation of aeronautical thin-wall arc shaped workpiece is investigated by using the finite element simulation technique.
结果表明，分析模型能有效解决门体变形问题，提高产品质量。
The result indicates the analysis model could effectively solve the door deformation problem and improve the product quality.
结果表明，打靶法是解决弹塑性梁大挠度变形问题的有效方法。
The results showed that shooting method was effective to deal with the deformation of elastic-plastic beam with large-deflection.
花样补偿功能，有效的解决因绗缝材料加厚产生花样变形问题。
Function of pattern compensation, can efficiently deal with the distorted patterns due to increased thick material quilting.
此外，还讨论了大跨越塔的局部变形问题以及隔面设置对局部变形的影响。
Furthermore, the local deformation and the cross section arrangement for transmission towers are also discussed.
讨论了焊缝是否存在压缩塑性变形问题和拉达伊d应力应变原理图存在的问题。
In this paper, the problems on compressive plastic deformation in the weld and the principle of welding stress and strain described by d.
大采深巷道变形问题日益严重，巷道需要多次维修增加支护成本、安全难以保证。
The deep roadway deformation problem is becoming increasingly serious, much maintenance increases support costs and security is difficult to guarantee.
本文从有限弹性理论出发对超弹性薄膜轴对称大变形问题进行了一般的数学描述。
In this paper, the problem of large axisymmetric deformation of hyperelastic membrane is reformulated on the basis of the general theory of finite elasticity.
沙坡头水利枢纽坝基以软岩为主，岩体变形问题已是本工程的一个主要地质问题。
Dam foundation of Shapotou Water Control project is mainly composed of soft rock and the rock body deformation is the major geological problem for this project.
针对交通荷载作用下软土地基的变形问题，采用累积应变的经验公式计算其累积沉降。
Using an empirical cumulative plastic strain formula, a method for calculating the traffic load induced deformation was proposed.
提出一种求解几何非线性问题的优化算法，并研究了简支梁的几何非线性大变形问题。
An optimum algorithm is proposed to solve the geometrically nonlinear problem for a simply-supported beam with large deformation.
提出一种解决几何非线性问题的优化算法，研究了悬臂压杆的几何非线性大变形问题。
An optimum algorithm is proposed to solve the geometrically nonlinear problem of large deformation of a cantilever under pressure on free end.
针对在电磁场和机械场耦合作用下的载流柱壳的非线性变形问题的数值解法进行了研究。
The numerical method for nonlinear deformation problems of current-carrying columnar shell under the coupled action of electromagnetic field and mechanical field are studied.
为了简便有效地解决板壳结构的大变形问题，针对16节点相对自由度壳单元进行研究。
A 16 node shell element with relative degrees of freedom was developed for large deformation analysis of plate and shell structures.
研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题。
The deformation of functionally graded truncated conical shell subjected to transverse mechanical load as well as non-uniformly thermal load is studied.
利用一种新的橡胶材料应变能函数，对橡胶楔体与刚性缺口接触大变形问题进行了分析。
A new strain energy function is used to analyze a rubber wedge contacting with a rigid notch.
利用一种新的橡胶材料应变能函数，对橡胶楔体与刚性缺口接触大变形问题进行了分析。
A new strain energy function was used to analyze a rubber wedge contact with a rigid notch.
研究表明，深埋隧洞软岩变形问题的研究在西线工程的设计和施工中占有极其重要的地位。
Studies show that the soft rock deformation have vital position in the design and construction of the west route.
目的对可摘局部义齿支架变形问题进行分析，探索钴铬合金熔模铸造支架产生变形的原因。
Objective To investigate the deformation of the removable partial denture and the reason of deformation of framework by Co - Cr alloy investment casting.
针对内燃机气缸套的动态变形问题，提出一套对湿式缸套在工作时的变形进行测试的方法。
Aiming at the dynamic deformation of engine cylinder liner, a set of testing methods for measuring the deformation of wet cylinder liner in operation are put forward.
就中开线春亭段输气管线在检修维护中发现的内层管道截面非正常变形问题进行了分析研究。
An analysis of abnormal deformation, which was found in the inner pipeline cross-section during the maintenance, was made on the Zhong-Kai gas transportation pipeline.
提出了广义滑移线法，将经典滑移线理论拓展到能求解所有二维问题和轴对称塑性变形问题；
The generalized slip-line theory is advanced, which develops the classical slip-line theory and can be used to solve all two-dimensional problems and axisymmetric plastic deformation problems.
通过对弹性半空间问题基本方程的简化求解，可计算任意分布力作用下的弹性接触变形问题。
Based on the numerical solution for the equation of the elastic half-space problems, the local elastic flattening from the arbitrary force distribution can be evaluated.
针对磨加工过程中的变形问题，对套圈的受力情况进行了分析，调整了工艺过程，使变形量减少。
To counter the problem of deformation in grinding operation, the stressed conditions of rings were analyzed, and the process was also adjusted so as to decrease deformation quantity.
对有限长立井井壁在任意轴对称的法向、切向以及端面荷载的共同作用下的变形问题作了分析研究。
The problems of deformation for shaft lining are investigated under arbitrary axisymmetric normal loads and tangential loads with end loads.
对于大变形问题，采用了多浮动坐标系的分段描述，有效地降低了离散化误差，提高了模型的精度。
About the large deformation description, a multi floating coordinate system is adopted. It can effectively reduce the error of discretization.
对于大变形问题，采用了多浮动坐标系的分段描述，有效地降低了离散化误差，提高了模型的精度。
About the large deformation description, a multi floating coordinate system is adopted. It can effectively reduce the error of discretization.
应用推荐