详细讨论了压阻型压力传感器设计中若刊重要问题。
Several important problems on the design of the piezoresistive silicon pressure sensors are discussed in detail.
我们的压力传感器设计用于不同的HVAC和冷却领域。
Our pressure sensors have been designed for use in various HVAC and Refrigeration applications.
纽曼帝克存款保障计划和DVS是数字压力非常精确的迹象表明，适当的系统压力传感器设计正在取得一致。
Numatics DPS and DVS is a line of digital pressure sensors designed for extremely accurate indication that proper system pressure is being achieved.
对压力传感器芯片的设计。
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
利用压阻效应、大(小)挠度理论、膜的应力形变等力学、电学知识设计了一种压阻式微压力传感器。
Based on the piezoresistive effect, large or small deflection theory, thin film's stress theory and other mechanics or electricity knowledge, a piezoresistive micro pressure sensor is designed.
本文介绍了作者设计、制作的一种谐振梁式压力传感器。
This thesis represents the design and fabrication of a resonant beam pressure sensor.
设计的微型压力传感器阵列可有效满足边界层分离点的检测要求，进一步拓展了MEMS器件的工程应用范围。
This design proposal of micro pressure sensor array can effectively meeting the measuring requirement of boundary - layer separation point, and expand engineering applied scope of MEMS devices.
介绍了差动变压器式压力传感器的工作原理、磁路设计及关键工艺。
The principle, the design of magnetic circuit and the key technics of the differential transformer type pressure sensor were described.
阐述了用于冲击波超压测量的压阻式高频动态压力传感器的设计与开发。
This paper introduced the design and development of silicon piezoresistive high frequency dynamic pressure sensor which used in the measurement of shock wave superpressure.
针对薄膜压力传感器的特性，设计各种性能补偿方法。
Various performance compensation methods have been designed according to the characteristic of the thin film pressure sensor.
提出和完成了自保护功能的真空微电子压力传感器的结构设计。
The design of overload protection is put forward in the vacuum micro electronic pressure senor.
介绍在IBM及其兼容系列微型机上，实现硅压力传感器版图CAD软件的设计方法。
The paper describes that a silicon pressure sensor with plate graph CAD software design is carried out on IBM and its series of compatible microcomputers.
介绍了一种新型金刚石高温压力传感器的优化设计方法。
Optimum design considerations for poly diamond piezoresistive pressure sensors are demonstrated.
介绍一种高量程压力传感器(压力表)自动校准装置的应用设计。
The design of an equipment of automatic calibrating high-level pressure sensors is introduced.
压力传感器在技术、设计、性能、适应性及成本上，差别较大。
Pressure sensors can vary drastically in technology, design, performance, application suitability and cost.
基于大面积柔性阵列压力传感器，采用分层设计、内销连接结构，研制了可移动式数字跑道及其系统软件。
Based on the flexible array sensors, using hierarchical design and inside-bolt linking structure, we developed the mobile digital-track and its system software.
为了对衡阳钢管厂轧机的轧制力进行实时监测，设计了一套压力传感器。
In order to on-line monitor rolling force of rolling mill in Hengyang Steel mill, a set of pressure transducers was designed based on structure and work conditions of the rolling mill.
介绍了夹持器的设计思路和压力传感器的优选。
Design of the holder and optimization of pressure sensor is presented.
介绍了硅压力传感器的作用及原理，并详尽讨论了在低抗干扰方面的设计思想与方法。
Function and working principle of pressure transducer in silicon have been introduced. And gave the detail discussion design ideas and method in disturbance.
利用压电陶瓷技术，设计并制备整体式多阵列压力传感器，并用于爆炸冲击波压应力的测试。
Planar array and monoblock type pressure gauges were designed and prepared by piezoelectric ceramics, which were used to measure pressure of explosive blast successfully.
本文设计了轮胎气压无线报警系统的发射端，该系统主要由汽车轮胎压力传感器、单片机和无线发射装置组成。
This paper designs the wireless warning system of tyre pressure. The system includes the pressure sensor, a single chip computer and the wireless emitter.
重点叙述了平膜应变式压力传感器弹性元件的选材特点、结构设计原理与最佳应力分布分析。
The material selection for elastomer, structure design principle and the analysis on optimal pressure distribution for the strain type pressure transmitter with plat membrane are described.
研究了一种新型的光纤压力传感器，并基于理论模型作了相应的优化设计。
A novel optic fiber pressure sensor is studied and a corresponding optimization design is carried out based on the theoretical model.
同时还系统地介绍了压力传感器的设计制造。
At the same time, this paper systematically introduces the design and manufacturing of pressure transducers.
论文的相关研究和实验结果对于微压力传感器的设计、制作具有一定的参考价值，微加工工艺的相关研究结论也可以应用在其它微机电器件的制作上。
Results of the research and experiments in this paper are beneficial to deign and fabrication of micro pressure sensors. The micro machining technology can also be used for other MEMS products.
根据模拟结果并结合单晶硅材料和SOI结构的特点，设计出了矩形应力膜单晶硅soi高温压力传感器芯片。
According to the result of simulation and characteristic of monocrystalline silicon SOI structure, a novel high temperature SOI pressure sensor with a rectangle diaphragm was designed.
对压力传感器进行了结构设计、标定、密封与防护，标定的应变随压力的变化规律符合生产实际的规律。
Construction design, demarcate, seal and defend is proceeded, and the strain change principle along with the pressure is matched basically with the real practice.
提出了一种新的光纤压力传感器的设计，该传感器敏感膜采用了台面结构而非传统的平面结构。
A novel pressure sensor with a mesa structure diaphragm is presented, which has a mesa structure diaphragm rather than the planar one.
提出了一种新的光纤压力传感器的设计，该传感器敏感膜采用了台面结构而非传统的平面结构。
A novel pressure sensor with a mesa structure diaphragm is presented, which has a mesa structure diaphragm rather than the planar one.
应用推荐