通过动力学分析和有限元模拟，设计出了具有高过载保护功能的加速度传感器结构。
Utilizing the dynamics analysis and finite element simulation, the acceleration sensor's mechanical structure with high overload protection capability was designed.
最后运用系统动力学的政策分析工具模拟了加入WTO对中国石油进出口海运量的影响。
Finally, the author simulates the influence of WTO entrance on petroleum seaborne volume with policy analysis implement of system dynamic.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
该试验台动力学模型包括汽车模拟碰撞动力学方程、动态响应及试验结果对比分析。
The dynamic model of the test bed includes dynamical equation of simulation impact for vehicle, dynamic response and contrast analysis of the experimental results.
模拟结果得出的晶粒形态、动力学和拓扑学结构特征等与已有的实验结果和理论分析一致。
The simulated results, including grain morphologies, kinetics and topological structures etc, are good agreement with the reported experiments and theoretical analysis.
对混合型潘尼管作了等离子体动力学分析和非线性粒子模拟。
A plasma kinetic analysis and a nonlinear particle simulation on a hybrid peniotron are made in this paper.
建立了精镗孔挤压液膜阻尼减振系统的动力学模型，运用MATLAB语言编程，对精镗孔挤压液膜阻尼减振系统进行了模拟计算分析。
Setting up a dynamics model of damping system of damper, and programming with the MATLAB language to calculate and analyze the damping system.
方法采用历史数据统计分析，建立系统动力学模型及决策模拟系统。
Method Statistical analysis of historical data was adopted to set up computer model of system dynamics and simulation system of Polcy-making.
本文介绍用Basic程序对八类连串反应进行动力学模拟的情况，通过典型分析结果表明，这个程序可适用于教学和科研。
BASIC program is written to simulate the kinetics of consecutive reactions of eight types. Case study results show that this program is useful for teaching and research.
针对甲醇电化学氧化过程中观察到的电化学振荡现象，建立了非线性动力学模型并对模型进行了线性稳定性分析和数值模拟。
We establish nonlinear dynamics model, make a linear stability analysis and numerical value simulation for the electrochemical oscillation phenomena observed in experiment.
本文在分析铝阳极氧化过程的反应机理的基础下，对其图灵斑图生长机制进行了动力学模拟的研究。
Based on the analysis of reaction mechanism in aluminum anodizing process, the dynamics simulation of Turing pattern formation mechanism in anodic aluminum oxide is investigated in the thesis.
着重描述了K系列模型的非线性动力学特性，并通过数值模拟进行分析。
The nonlinear dynamic characteristics of the K set models through numeric simulation are investigated.
通过与传统的黏塑性和改进的黏塑性模型结果的对比分析，进一步验证了黏弹塑性模型在中小尺度海冰动力学模拟中的可靠性。
The new constitutive model is further applied to simulating ice dynamics of the Bohai Sea and compared with the traditional VP, and modified VP models.
通过直接的数值模拟，分析了原子束在激光驻波场下传播的动力学行为。
Building on direct numerical calculation, it analyzes the dynamics of atoms propagating through a laser standing wave (SW) potential in the regime of immersion-lens.
分子动力学模拟和宏微观分析均得到裂纹起始扩展的临界时刻、裂尖应力场和原子平均能量。
When crack starts to grow, the normal stress and average atom energy at the crack tip in atomistic simulation agree well with the results of continuum analysis.
本文通过岩溶特征分析和模拟试验研究，探索了岩溶形成演化环境及水文地球化学和水动力学蚀变模型。
Through the analysis of karst characters and study of simulated tests, the paper explores environment of formation and evolution of karst and hydrogeochemistry and hydrodynamic alteration model.
建立了铁路集装箱系统的动力学方程，可供集装箱平车做一般运动时的动态模拟分析之用。
The dynamic equations of a railway container system is acquired, which can be used for its dynamic simulate while the container flat wagon's movement is in a general condition.
系统地给出了杠杆模拟法的理论和应用方法，并将该方法推广成为行星式变速器动力学分析的通用方法。
The theory and solution of the lever analogy are systematically given, and the method is generalized to become a common one of dynamic analysis for planetary transmission.
本文在建立了自蔓延高温合成过程燃烧动力学模型的基础上，用数值计算和计算机模拟方法，对燃烧波特征及其变化规律进行分析模拟。
On the base of combustion dynamical model of SHS process, the characteristics of combustion wave and its change were analyzed by numerical calculation and computer simulation.
将振动叶栅三维流动数值模拟与振动叶片结构动力学分析相结合，建立了叶片颤振数值分析系统。
The numerical flutter analysis system was formed by the three-dimensional numerical simulation of the vibrating cascade flow combined with the structural dynamics analysis of vibrating blade.
对混凝土进行静动力学分析的数值模拟程序，从多个方面考虑了其中的并行算法设计。
The parallel computing technique is applied to design the programming for numerical simulating the fracture and damage of concrete under static-dynamic load.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
在对主轴部件分析模型进行研究的基础上，采用弹簧阻尼单元模拟轴承支承的方法，建立了主轴部件动力学分析有限元模型。
The finite element dynamic analysis model of the spindle assembly was developed by taking the advantage of the spring-damper elements to simulate the bearing supports.
利用大型通用有限元分析软件ANSYS简单模拟辽西地区中生代末期岩石圈动力学演化过程。
Using general finite element program ANSYS, we simulate a dynamical evolution process of the lithosphere of west Liaoning, northeast China in the late Mesozoic.
利用显示动力学有限元分析方法，模拟了波纹轨腰钢轨的轧制过程。
The rolling process of corrugated waist rail is simulated by explicit dynamic FEM.
试验结果为该并联地震模拟器进一步的性能分析、动力学分析和控制系统设计等奠定了基础。
The analysis results lay a foundation for the further analysis of performance, dynamics and control system design.
方法：（1）模型建立：以相关的电学参数模拟血液动力学参数，以电路图（电路模型）分析的方法建立血液动力学理论模型。
Methods: (1)Model establishment: The hemodynamic model based on electrical circuit analysis was established by simulating hemodynamic parameters with electrical ones.
首先，从频域和时域的角度对路面不平度进行模拟，进而建立一系列车辆动力学模型，并以此作为车辆动载荷分析的基础。
First, road roughness is simulated in frequency and time domain, and some vehicle models are established for the study of vehicle dynamic load.
首先，从频域和时域的角度对路面不平度进行模拟，进而建立一系列车辆动力学模型，并以此作为车辆动载荷分析的基础。
First, road roughness is simulated in frequency and time domain, and some vehicle models are established for the study of vehicle dynamic load.
应用推荐