这样经过打蜡的石材在使用中很快就会露出加工粗糙的原貌，影响其装饰效果。
After waxing the stone so that in use will soon reveal the original appearance of rough processing, affect its decorative effect.
表面粗糙度只有在精加工的时候才是重要。
Only in surface roughness of the finishing time is important.
分析了不同加工参数对被加工内圆表面粗糙度和研磨量的影响。
Effect of different machining parameters upon the inner surface roughness and the removal rate was analyzed.
高速超高速磨削是提高磨削效率、降低工件表面粗糙度和提高零件加工质量的先进加工技术。
High speed grinding and ultrahigh speed grinding is an advanced processing technique which can raise grinding efficiency, reduce work surface roughness and promote machining quality of the parts.
在表面粗糙度的影响因素和影响规律方面：主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。
For influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.
本文通过粗糙度切削试验，分析讨论了车床主轴油膜减振支承对其加工粗糙度的影响。
This article analyses the influence of the support of oil film vibration damping of the main spindle on cutting degree of roughness through cutting test.
切削力、磨削力和磨削表面粗糙度是表征切削加工和磨削加工的最重要特征量，对它们进行预测分析和过程控制具有十分重要的意义。
Cutting force, grinding force and surface roughness of grinding are the most important parameters to scale machine progress, thus precision methods for them is needed in engineering.
经加工试验证明了该表面粗糙度预测模型的有效性，从而实现加工前在确定切削条件下预测和控制表面粗糙度的目的。
It proves that this prediction model is effective by machining experiments. Using prediction model can predict and control surface roughness under certain condition.
面向加工的表面粗糙度、精度等级、公差等级等，通过造型特征识别转换得到。
Then, roughness, precision and tolerance for surface machining were obtained by transition of formative feature recognition.
由于黑小麦本身的结构特性及其高硬度，普通的加工工艺不仅出粉率低，而且粉质粗糙。
For characteristics of rye's structure, tradition processing technology not only get low output of rye flour, but also obtain rough flour.
以这两种刀片在不同切削用量条件下的耐用度、加工表面粗糙度和主切削力作为刀具加工性能的评价依据，同时研究了刀片的磨、破损机理和卷、排屑稳定性。
The tool lifespan, surface roughness and main cutting force of the two kinds of tools with different machining parameters are used as the evaluation criterion of machining ability.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
针对这一问题，提出了全曲面等误差和均匀粗糙度加工的概念。
In the paper, a new conception about equal errors and uniform roughness on whole surface is proposed.
铣削加工表面粗糙度的形成与铣刀和工件振动、主轴偏心、刀具磨损、刀具变形等物理和几何因素有关。
The surface roughness in mill machining relates to quiver of work piece, principal axis's eccentricity, cutter abrasion, cutter distortion and other physical or geometry factors.
介绍了一种采用计算机控制激光位移传感器在线检测木材机械加工表面粗糙度的新方法。
This paper investigated the possibility of measuring the surface roughness of wood by the laser displacement sensor of the computer control.
纤维增强复合材料的切削加工表面结构和粗糙度与切削方向密切相关。
The machined surface texture and roughness of composites reinforced by fiber are closely related to the cutting direction.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
它使用了静压磨头装在龙门刨床上对机床导轨进行加工，精度及表面粗糙度达到精密导轨的要求。
The guideways of machine tools are worked by using hydrostatic grinding head attached to a planer. The accuracy and surface roughness reach the requirements of precision guideways.
从不重磨车刀的使用寿命、加工表面粗糙度等方面，来展开试验分析研究。
From the wear resistance of non-regrind cutters and the roughness of processed surfaces, some tests and analysis are done.
在已加工表面粗糙度研究领域引入回归正交分析，采用多元二次回归正交设计得到了数控车削参数与已加工表面粗糙度的回归预报模型。
At realm of surface roughness of machined surface, forecast mathematical model is set up by using quadratic regression orthogonal design between NC turning parameter and machined surface.
普通金属材料的切削加工理论表面粗糙度可以用公式计算。
The theoretical roughness of machined surface of common metal materials can be calculated using the current formula.
放电单脉冲的电流峰值和脉宽决定了单个电火花蚀坑的大小和深度，从而直接决定了工件的加工表面粗糙度、形状精度和尺寸精度。
The peak current and pulse duration of single pulse determine the size and depth of discharge crater, so they determine the machining surface roughness and size and shape accuracy.
在研究砂轮结构的基础上得出砂轮磨粒分布的随机性是磨削加工能产生表面低粗糙度值的重要因素。
According to the research on wheel structure, the random distribution of grains of wheel is an important factor producing better roughness on ground surface.
研究了切削速度和进给量对加工表面粗糙度的影响。
The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.
零件的表面加工精度由相应的参数来表征，例如表面粗糙度参数、波纹度参数和形状误差参数等。
The surface machining precision of the accessories is denoted by relevant parameters, such as the parameters of surface roughness, the parameters of ripple, the parameters of shape error and so on.
本文还研究了玻璃切削刀具特征参数对已加工表面粗糙度的影响。
In addition, the influences of characteristic parameters of tools for glass cutting on machined surface roughness are presented in this paper.
本文还研究了玻璃切削刀具特征参数对已加工表面粗糙度的影响。
In addition, the influences of characteristic parameters of tools for glass cutting on machined surface roughness are presented in this paper.
应用推荐