软化剂的加入可以改善其硬度及加工流动性。
Its hardness and flow properties can be improved by adding softener.
ABS的加入有利于改善PPESK的加工流动性及制品外观。
The addition of ABS is favourable for the improvement of PPESK processing flowability and appearance of products.
ABS的加入有利于改善PPESK的加工流动性及制品外观。
The addition of ABS is favourable for the improvement of PPESK processing flowability and appearance of pr...
EVA能够改善合金体系的加工流动性，却明显降低了合金体系的力学性能。
The processing properties of the alloy are increased but its mechanical properties lose more or less when EVA is added.
毛细管流变测试表明，RH100使胶料的表观粘度降低，改善加工流动性。
Capillary flow test showed that, RH100 can reduced the apparent viscosity and improve the flowing ability of rubber compound.
初步认为HBP通过降低混合熔体的表观粘度来改善UHMWPE的加工流动性。
It was believed the processability of UHMWPE was improved by the decrease of the apparent viscosity by HBP.
与目前广泛使用的普通聚丙烯材料相比，该材料具有高韧性和良好的加工流动性。
Compared with a command polypropylene material which is widely used at present, the material has the characteristics of high toughness and high processing flowability.
它是PC非常有效的增韧剂，同时，可以改善PC的加工流动性，二者共混可望开发出有重要实际意义的塑料合金。
The results show that the elastomeric MMA copolymer R, which is partially compatible with PC, is a very efficient toughening agent and improves the melting flow rate(MFR) for PC.
结果表明，KTR-6C的加入，改善了PC/PBT之间的相容性，改善了PC/PBT共混体系的加工流动性能和外观。
The results showed that the addition of KTR-6C improved the compatibility, processing flowability and appearance of PC/PBT.
矿物和金属加工行业内的各种类型的中央控制和过程操作员的流动性不大。
There is little mobility among the various types of central control and process operators within the mineral and metal processing industry.
一般而言，大多数热塑性材料具有较高的抗冲击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。
In general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.
矿产和金属加工业的各类机器操作员之间具有很小的流动性。
There is little mobility among the various types of machine operators within the mineral and metal processing industry.
轻型和重型金属加工机械运营商之间很少或根本没有流动性。
There is little or no mobility between operators of light and heavy metalworking machines.
半固态金属具有良好的流动性，易于通过普通加工方法制成产品，并且具有加工温度低，产品质量高等优点。
Semi-Solid Metal shows good flowable behaviour so that it could be manufactured easily by general working methods, and it also has some advantages such as low working temperature, high quality etc.
增韧，热稳定，黑色尼龙66树脂注塑。它是一种高流动性，加工友好材料。
Toughened, heat stabilized, black polyamide 66 resin for injection molding. It is a high flow, processing friendly material.
介绍了影响木塑复合材料性能的几种因素，其中包括相容性、流动性、加工工艺的影响，并提出了相应的改善方法。
This paper discusses the factors affecting the properties of wood plastics composites including the effects of compatibility, fluidity, processing and puts forward the relevant improving methods.
产品流动性及加工性能好，设备、工艺条件基本不需要改变。
Better fluidity and processing performance, don't need to change the equipment and processing technique.
本文介绍了经不同方法加工处理后四种麦秸秆的可用性能，着重研究了流动性秸秆水泥复合材料的密度、强度以及可浇注性。
This paper introduces the availability of four wheat-straw processed by different method, put emphasis upon density, compression strength and castability of Flowing Straw-Cement composition.
同时，虽然氟橡胶具有优异的耐高温和耐介质性能，但在加工过程中仍然存在着粘模、热撕裂性及充模流动性差以及物理特性等方面的问题。
Although the fluorine rubber has the outstanding heat resistance and solvent resistance property, it also have some problems such as sticking the mold, the bad fluidity in processing.
由于图书这个行业在员工流动性很难把握，而作为馆配数据加工服务的特殊性质又决定了员工稳定性是保证优质的服务的前提。
As the book industry in the mobility of staff to grasp, and as a data processing services to the special nature of the decision is to ensure staff stability the prerequisite for quality services.
流变性能分析结果表明，MAH的加入使共混体系的流动活化能有了显著的降低，增加了共混体系的流动性，提高了共混体系的加工性能。
By the rheological analysis, the addition of MAH decreased the flow activation energies, improved the flow behavior of the blends, and further ameliorated the machining properties.
它通过改善流动性，提高塑料产品的加工性能。
It provides improved flow during processing while retaining temperature resistance and toughness.
加工应用试验结果表明该树脂既有较高的流动性又有良好的力学性能。
The effect of application test showed that the resin had a high fluidity and good mechanical properties.
同时，由于炭黑吸附在PVC分子链上，降低了PVC的流动性，即降低了加工性能，但提高了其玻璃化温度和力学强度。
Meanwhile , the absorption of carbon black on PVC molecular chain can reduce the flowability of PVC, but can increase its glass transition temperature and mechnical property.
流变分析表明专用料流动性好，可加工范围广。
The results of rheological analysis showed the special PP had good flowability and wide processing windows.
选择软焊合金时应考虑其流动性、密封能力和导电性，此外？以提供光滑的加工表面。
Solder alloys are selected for their properties to flow, sealing ability, electrical conductivity, and for general body work to provide a smooth surface for finishing.
物理改性提高了UHMWPE的熔体流动性，降低了其熔体黏度，使其能在专用或通用设备上加工成型。
The physical modification improved melt flowing property and decreased melt viscosity of UHMWPE, the modified product could be processed in special or general facilities.
而且，这些阻燃剂有利于改善加工性能，可用作薄壁和高流动性的制品。
Furthermore they allow to improve processing characteristics. They can be used for thin wall and high flow applications.
最佳的流动性、可加工性能，经济实用的薄壁设计用途。
Optimizes flow/processability for cost effective thinner wall design uses.
最佳的流动性、可加工性能，经济实用的薄壁设计用途。
Optimizes flow/processability for cost effective thinner wall design uses.
应用推荐