组织的制造可行性-可行性分析应包括适当的供应商和顾客组织。
Organization Manufacturing Feasibility - Feasibility analysis shall include supplier and customer organizations as appropriate.
有一项研究是，探索利用脉动电场制造耐储存的色拉酱的可行性。
One study explored the feasibility of using PEF in making shelf-stable salad dressings.
克莱格等人(1995)解释说，电子行业的线性规划模型可以用来分析在再制造过程中回收零部件的可行性。
Clegg et al. (1995) explain that in the electronics industry linear-programming models can be used to analyse the viability of the recovered parts in remanufacturing.
瓦赫宁根大学正在引领一项有关提取昆虫蛋白质用于食品制造的可行性的研究。
Wageningen University is leading research into the viability of extracting insect protein for use in food products.
支持项目经理对新产品开发工装的报价及可行性分析工作，对供应商的制造方案进行技术评估。
Support project manager with tooling quotation of new product, its feasibility analysis and technical evaluation on supplier's manufacturing program.
中国最大的商用车制造商北汽福田正考虑不久在印度建立工厂。业内人士称该公司已经完成了可行性研究。
China's largest commercial vehicle manufacturer, Beiqi Foton, is considering setting up a facility in India shortly. Industry sources say it has already done a feasibility study.
EASA预计，更简单的条件将使得更多的制造商制造更加经济的飞机，而且无需放弃高安全标准的可行性更高。
EASA expects that the simplified conditions will make it possible for more manufacturers to build economical aircraft without giving up the high safety standard.
本文介绍了新型液压锁阀的结构原理。对该锁阀的技术与加工制造方面的可行性进行了论述。
This paper introduces the structure and mechanism of a new type hydraulic lock and the feasibility of its technology and manufacturing.
评估设计和开发中的成本，制造和组装的可行性。
Maintain appreciation of costing, manufacturing and assembly feasibility in design and development.
本论文主要分析讨论采用分体式结构制造捣镐这一工艺的可行性。
The research purpose-of this paper is to analyses and discusses possibility of this craft of adoption parted type structure to make tamping pick.
探索了全厚度缝合复合材料闭孔泡沫芯夹层结构低成本制造的工艺可行性及其潜在的结构效益。
This study explored the feasibility and potential benefits provided by the addition of through-thickness stitched composite closed-cell foam sandwich structures.
通过在此家具制造企业的应用，验证了本论文提出的家具产品网络化销售模式及本课题开发的系统的合理性和可行性。
This application in a furniture enterprise in ChongQing validates the rationality and feasibility of the networked marketing system which is described in the thesis.
根据有限元分析设计制造了定子，并进行了可行性试验。
Based on the analyses of FEM, the stator is designed, and fabricated for trial to verify its feasibility.
本研究旨在探讨在数字化牙颌模型基础上个体化直丝弓托槽及辅助定位托盘的计算机辅助设计与制造的可行性。
This paper discusses the feasibility of individualized straight-wire brackets and its positioning trays design and manufacturing based on digital dental model with computer-aided technology.
研究验证了复合材料制造发动机机体的可行性，并为复合材料发动机机体的结构设计提供了依据。
This research proves that engine block made by composite material is feasible, and also provides ground for constructional design of engine block made of composite material.
在第四章，对理想材料结构热锻模具的制造方法进行可行性研究讨论。
The feasibility study of manufacture method for "Ideal Material Structure Hot Forging Die" is expressed.
能够借助技术图纸及部件明细表核查产品制造的可行性，并向工程部做出反馈；
Ability to check the manufacture possibility with help of technical drawings, bill of materials and give feed backs to the engineering department;
本文分析了压力容器制造工艺设计的现状，论述了采用计算机设计工艺的可行性。
The current situation of manufacture process design of pressure vessel was first analyzed. Then, the feasibility of using computer to aid process design was stated.
对使用等温淬火球铁制造增压柴油机曲轴的技术可行性和生产可行性，以及经济效益与市场进行了分析。
The technology and production possibility of using ADI for making turbocharged diesel engine crankshaft, as well as its economic benefit and market was analyzed.
常规的模具制造工艺规划系统只是从工件的角度编制工艺，忽略了工件加工过程中的工序相关性，从而影响了车间作业优化调度的可行性和合理性。
In traditional processing, the technology is made according to the work piece and procedure relativity is ignored, so that feasibility and rationality are both affected.
中铝广西分公司一期压煮器在运行过程中接管焊缝多次出现渗漏，本文从运行状况、制造质量方面分析了渗漏的原因，并探讨了材料国产化的可行性。
The reasons of leakages were analyzed in terms of operating conditions as well as manufacturing quality, and the possibilities of material's domesticalization were discussed in this article.
项目进展：项目已初步规划，目前寻找国外随车起重机的制造商合作者共同进行合资项目的可行性研究工作。
Process of the project: This project has been initially planned and looking for a foreign manufacturer of truck-mounted cranes to do the feasibility study of the project at the present moment.
从战略动机、战略可行性和战略内容等方面，分析了瑞士手表制造商斯沃琪集团实行的多品牌战略。
This paper analyzes on the multi-brand strategy of Swiss watch producer, Swatch Group, from aspects of the strategic motivation, strategic feasibility, and strategic contents, etc.
本文先分析了现代模具制造引进虚拟技术概念的可行性，然后对其组建模式进行深入的探讨。
The paper analysis that it is feasible to apply the concept of virtual manufacturing technology to modern mold manufacturing, and further discusses the organized mode of modern mold manufacturing.
最后，以某航空制造企业的协同服务管理系统为例说明本文方法的具体系统实现及可行性。
Finally, the implementation and application of the method in the article is demonstrated by the maintenance management system of an aircraft manufacturing cooperation.
在此基础上，讨论了基于约束检验的可制造性评价内容和提出了结构工艺性评价和加工可行性评价的分层评价树；
On this basis, the content of manufacturability evaluation based on boundary checking is discussed and the layered evaluation tree of part configuration and machinability is proposed.
主要对三维动态模拟在机床设计制造中应用的可行性及其意义进行探讨。
This article is mainly about the feasibility and foreground by using 3d Dynamic Simulation in the field of Machine Tool design.
论述绿色制造及其评价系统，并通过实例验证了该评价系统的可行性和实用性。
This paper discusses the green fabrication and its assessment system and verified by examples that the feasibility and practicality of the assessment system…
论述绿色制造及其评价系统，并通过实例验证了该评价系统的可行性和实用性。
This paper discusses the green fabrication and its assessment system and verified by examples that the feasibility and practicality of the assessment system…
应用推荐