因此应对病人采用个体化的制动方式选择。
Thus individual preference may be followed in choice of immobilisation method.
矿井提升机下放重物时，多采用动力制动方式。
When transfer heavy object to a lower level, mine hoist usually USES the way of power braking.
本文首次对它们联合作用的持续制动方式进行探讨和研究。
The thesis probes and researches the continuous brake mode affected together by all above for the first time.
根据该制动器的功能要求，所研制的该制动方式的气路系统由四条气路组成。
The pneumatic system of the brake system consists of four air circuits according to the brake function requirements.
分析了变频器的两种主要制动方式，给出了变频器在矿井提升机应用中的选用原则。
The paper analyses the two main approaches for braking the transducer, offers its selection principle in mine hoist.
差动保护的穿越制动特性依赖于制动电流的选取，每种制动方式有其自身的制动特性。
The characteristic of through current restraint depend on selection of restraint current. The different restraint schemes have distinct characteristic.
采用的总体改进设计方案是：前轮仍然保持现有气控制气制动方式，后轮则采用电控制气制动。
The overall improvement design was that the front wheel still maintained the existing air brake air control mode but the rear air brake was controlled by electricity.
本文结合国内外情况 ，对蓄能电站电动—发电机不同的启动、制动方式 ，优缺点等作了比较和阐述。
Combining domestic and abroad circumstances, accumulating motordriven generator different start and trig way, the advantage and disadvantage etc.
研究表明，在坡度不断变化的山区公路上，联合作用的持续制动方式可以使汽车在上述速度范围内稳定行驶。
Research shows, on mountain highway with varied falling gradient, the continuous brake mode affected together can make vehicle travels steady in the speed range.
虽然这种制动方式技术成熟，且结构简单，但存在不可避免的问题是制动延迟时间过长，导致制动距离过长。
Although the brake system was mature in technology and simple in structure, there was inevitable problem in braking such as delayed braking time which could result in long braking distance.
根据永磁无刷电动机制动过程PWM控制的开关管的方式不同，可以分为半桥调制制动方式和全桥调制制动方式。
According to the different PWM module in regeneration of brushless PM motor, there are two kinds of modulation, half bridge modulation and whole bridge modulation.
针对缆车下放重物的变频制动情况，分析了两种制动方式，选择了动力制动进行了设计，并在试验室试验获得可靠的数据。
In view of the conversion braking conditions of cable car during transferring heavy to a lower level, the article analyzes two kinds of braking manner and chooses dynamic braking for the design.
交流拖动提升机电气制动是提升工艺中比较重要的一部分，目前交流异步电机拖动的提升机中，广泛应用的制动方式是低频发电制动和动力制动。
The electric brake of AC shaft hoist is an important part on hoisting technics low frequencies power generation brake and power are widely used in the shaft hoist of AC asynchronous drive at present.
驾驶舱内的车手视情况向前面和后面的电路分配不同大小的刹车制动功率，分配方式以使车辆在油量不断减少的情况下稳定行驶为目标。
The amount of braking power going to the front and rear circuits can be 'biased' by a control in the cockpit, allowing a driver to stabilise handling or take account of falling fuel load.
驾驶舱内的车手视情况向前面和后面的电路分配不同大小的刹车制动功率，分配方式以使车辆在油量不断减少的情况下稳定行驶为目标。
The amount of braking power going to the front and rearcircuits can be 'biased' by a control in the cockpit, allowing a driver tostabilise handling or take account of falling fuel load.
发电机工作方式，应用于某些拖动情形，例如产生再生制动。
The generating mode of operation is utilized in some drive applications to provide regenerative braking.
本文研究基于超级电容储能方式的城市轨道交通再生制动能量吸收利用技术。
In this paper, an absorbing and utilizing technology for the brake regenerating energy in urban transit based on ultra-capacitors is researched.
控制器设计为转矩控制方式，给汽车提供连续可调的起动、助力和制动转矩；
To give the HEV any magnitude torque within rated torque for starting aid and braking, the controller is implemented with direct torque control.
为了提高能源的利用率，控制器采取能量回馈制动的方式，将制动时的能量回馈到电池。
To obtain the optimal energy utilization, the controller controls the regenerated energy feeding to the battery when the motor operates in braking mode.
内容涉及基本技术要求、牵引方式、动力分配方式、制动、速度控制、运用与检修等。
They cover basic technical specifications, traction mode, power distribution method, braking, speed control, operation and maintenance.
介绍EP2002制动控制系统的主要组成部件、安装方式、作用原理及特点，并与常规制动控制系统进行了比较。
The main compositions, mounting mode, working principles and characteristics of the EP2002 brake control system are introduced and compared with general braking control system.
简要介绍公路行驶的柴油发动机车辆在实施排气制动时防止发动机熄火的控制方式。
Control mode to prevent engine flameout in exhaust braking on diesel engine vehicle is introduced.
控制器采取再生制动的方式实现能量回馈。
The controller controls the regenerated energy when the motor operates in regenerative braking mode.
系统地介绍了电磁调速电牵引采煤机计算机控制调速系统的构成和制动运行方式，并对电磁调速采煤机的特点进行分析。
Systematically introduce a mining machine draw by electricity and its speed governed by system and way of brake by computers in a mining machine whose speed is governed by electromagnetism.
文章提出了一种新的斜墙式半横向通风方式和风机反转制动消防技术以及它们在火灾时的作用。
The paper introduces a new semi-transverse ventilation system with oblique walls, a fire control technique with ventilator braked by reversal operation and their functions in the fire control.
由于采用了电流负反馈控制方式，制动力矩的大小可根据需要进行控制。
Due to electric current negative feedback control, the intensity of braking torque can be controlled as it is needed.
驱动系统包括电机、传动装置、制动装置、传动方式等。主轴的一端安装角度盘，用来指示工件不平衡相位。
The drive system includes motor, transmission, brake, transmission, etc... One end of the main shaft is provided with an Angle plate, which is used to indicate the unbalanced phase of the workpiece.
本文介绍了一个控制桥式起重机的变频调速系统，它根据桥吊的特殊性能要求，采用矢量控制方式，具备平滑调速、能量回馈、顺序制动等功能。
According to the special requires of bridge crane, it adopts the vector control theory, has functions of regulating speed smoothly, energy feed back, sequence brake etc.
实践证明，变频调速具有优异的调速和起制动性能，以及高功率因素和高效率的节电能力等优点，而被国内外公认为最有发展前途的调速方式。
It is proved that, frequency conversion has excellent accent speed, a brake capability, high efficiency rate, great credit rate factor and joint electricity effect and other merits.
实践证明，变频调速具有优异的调速和起制动性能，以及高功率因素和高效率的节电能力等优点，而被国内外公认为最有发展前途的调速方式。
It is proved that, frequency conversion has excellent accent speed, a brake capability, high efficiency rate, great credit rate factor and joint electricity effect and other merits.
应用推荐