研究了制动近零状态和制动抱死状态下制动力矩的求解理论,开发了一种新的制动系统模型。
A new braking system model was built from a study on the solution method of the friction brake torque under the conditions of braking to near zero speed and braking lock.
我们的汽车还达不到这样的水平,但是越来越多的功能也都交付给汽车自己进行控制,像防抱死制动以及巡行控制。
While our cars can't yet drive themselves, more and more functions are being given over to the vehicle, from anti-lock brakes to cruise control.
安全带是强制安装的设备,但是增加的汽车购买者并没有对安全气囊或防抱死制动系统的需求,汽车制造商说道。
Seat belts are the only mandatory equipment, and the increase in car buying hasn't boosted demand for airbags or anti-lock brakes, automakers said.
提出了针对路面条件通过控制器调节制动压力输出特性使车轮滑移率处于理想的范围,以实现防抱死制动的原理。
The anti-lock brake principle, regulating braking pressure output properties in accordance with condition of road surface so as to control the wheel slip ratio in idea scope, is put forward.
防抱死制动系统是汽车上的第一个能针对驾驶员命令背道而驰的系统。
ABS is the first system in the car that can do the opposite as the driver commands.
介绍汽车防抱死制动系统ABS在客车上的应用背景,ABS部件及其主要技术数据,ABS的常见故障及其诊断方法。
This paper introduces the application background of ABS on buses, the ABS components and their main technical data, the common faults of ABS and the diagnostic ways.
在车辆表面微机械加工的传感器还通过倾斜控制提供保护,防止循环翻转,并在防抱死制动系统的使用。
Surface micromachined sensors in vehicles also provide protection against roll-overs via tilt control, and are used in anti-lock braking systems.
在导出摩托车液压盘式制动防抱死控制参数计算公式的基础上,进行了防抱死控制器的功能原理设计、结构设计和样品制造。
The design of controller function and structure, sample product are made on the basis of deriving control parameter calculation formulas of motorcycle hydraulic anti-lock brake.
实验结果表明,控制器硬件设计合理,软件程序逻辑可靠,能够很好的实现防抱死制动控制的目的。
Experiment results show that the designed hardware and software are reasonable and reliable, and controller can meet the demand of control.
对气制动系统制动压力调节的各种方法进行研究与对比,包括传统的限压阀、比例阀以及汽车防抱死系统。
A comparison among different kinds of brake pressure regulation methods in air brake system is made, including traditionary Pressure-limited Valve, Proportion Valve and ABS system.
制动力只有当它可以被控制而且轮胎没有抱死时才是有用的。
Brake power is only useful if it can be controlled and the tire does not lock up.
这一结合防抱死制动系统(ABS)的版本,以三活塞前制动卡钳和本田最先进的防抱死制动系统的超强操控为特色。
The combined-ABS version features triple-piston front brake calipers and the confident control of Honda's most advanced Antilock Brake System.
采用标准四通道、四传感器的防抱死制动系统(abs)可通过制动和节气门控制来控制轮胎打滑。
Using the sensors and actuators of four-channel, four-sensor anti-lock brake system (ABS) USES both brake and throttle intervention to control wheel spin.
这些计算结果可用来指导可调式液压制动防抱死控制装置的设计。
These calculation results can be used to guide the design of Anti Lock Brake control devices.
然后建立了主动横摆控制的控制逻辑,通过加入制动防抱死系统和牵引力控制系统,构成了电子稳定程序的控制逻辑。
Then we build the control logic of active yaw control, by adding anti-braking system and traction control system which constitute the ESP controller.
结果表明,该部件在制动过程中通过抑制尖脉冲使其制动系统压力缓升,从而更好地在部分路面上起到防抱死作用。
Results show that this system has better function of anti-lock braking ability and it helps control sharp pulses on the road.
为提高汽车行驶安全性,制动防抱死系统(简称abs)在汽车上得到了广泛应用。
The vehicle Antilock Braking System (be short for ABS) has been widely applied on the vehicles, in order to improve the safety.
汽车防抱死制动系统(简称abs)是提高和改善汽车制动性能的重要途径。
Anti-lock braking system (ABS) is one important way for improving the automobile braking performance.
通过仿真分析发现,在车辆无ABS转弯制动时,即使按照理想抱死顺序实施制动,半挂车也会出现瞬态“甩尾”的危险工况。
It is found by simulation that, without ABS, even if brake is applied in ideal sequence, transient 'spin' instability will occur when braking vehicle turning.
采用分层协调控制策略,进行了汽车电动助力转向系统和防抱死制动系统集成控制的研究。
By adopting layered coordinated control strategy, a study on the integrated control of electric power steering system (EPS) and anti-lock braking system (ABS) is carried out.
利用四轮车辆模型对汽车以较小刹车力矩制动、以最佳滑移率制动和车轮抱死后制动等几种典型工况进行了仿真。
Some typical brake conditions are simulated with four-wheel vehicle model, such as braking with a lesser brake moment, braking in the optimal slip and braking when wheels are locked.
针对汽车转向制动工况提出了一种主动前轮转向和防抱死制动系统的协调控制方法。
A coordination control method of vehicle active front wheel steering and ABS on steering and braking conditions was presented.
应用abs能有效地提高汽车的行驶安全能力,彻底分析了电子式防抱死制动系统的控制原理和过程。
The application of ABS can improve the automobile driving safety ability significantly, the controlling theory and process of electronic ABS are thoroughly analyzed.
汽车; 汽车制动防抱死控制; 汽车稳定性控制;性能评价;硬件在环试验。
Vehicle; Vehicle Electronic Stability Performance; Anti-lock Brake Control; Active Yaw-moment Control; Performance Evaluation; Hardware in Loop Test.
该套方案实施容易,稳定可靠,为研究ABS系统的防抱死制动过程和控制逻辑提供了方便。
This approach, which is stable and reliable, can be implemented easily, and is convenient of the study of brake process and control logic of ABS.
制动防抱死系统是防止车轮抱死,减少汽车滑动和防止车辆侧滑的主要装置。
Anti-Lock Braking System prevent wheels from locking, reduce the slide of automobile and prevent slide of side direction of vehicle.
随着汽车防抱死制动系统(ABS)的广泛应用,商用车ABS装配正确性的检测变得越来越重要。
As the Anti-lock Brake System(ABS) has been widely used, testing assembly correctness of Commercial Motors ABS has become more and more important.
试验表明,该转毂试验台及其测试程序能满足防抱死制动系统性能的测试要求。
It was shown that the revolving drum test table and the testing procedures can meet testing requirements for the anti-lock brake systems.
深入探讨了轮速传感器、防抱死制动电子控制器、电磁阀、回液泵的结构组成与工作原理。
The construction and working principles of speed sensor, ABS ECU, electromagnetic valve and return liquid pump are analysized in detail.
因此,汽车防抱死制动系统的控制方法如何选择,是决定其制动性能的主要因素之一。
So the control method of ABS is one of the vital factors for deciding braking performance.
应用推荐