本文系统地介绍了液控刚性试验装置的工作原理结构及测试系统。
The paper deal with the principle, construction and measuring system of a rigid testing equipment hydraulically controlled.
这些在1984年系统已经接受各种不同环境和天气情况下的刚性试验。
These systems had received rigid tests in various environment and weather conditions in 1984.
塑料管道系统。玻璃纤维增强式热固性塑料元件。检验带有弹性密封件的刚性锁定管座套筒接头设计的试验方法。
Plastics piping systems. glass - reinforced thermosetting plastics components. test methods to prove the design of rigid locked socket - and - spigot joints with elastomeric seals.
基于刚性模型风洞试验，对一个具有索网幕墙的新型杂交结构——某大型博物馆结构进行风致响应计算。
Based on rigid model wind tunnel test, wind-induced responses of a neotype hybrid-structure with cable-net curtain walls (a large-scale museum structure) are computed.
选择合适的收缩试验方法对半刚性基层材料的收缩性能进行研究非常具有现实意义。
Choosing suitable shrinkage test method to study semi-rigid base course materials' shrink performance has high practical significances.
电绝缘用非刚性氯乙烯聚合物管的试验方法10。
Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation 10.
试验结果表明：该模型对部分遮挡，非刚性变形，目标外观发生改变均不敏感。
Experiment result shows that the model is robust with the situation of partial occlusion, non-rigid image deformation and natural appearance changes.
在双塔楼风洞试验基础上，采用刚性模型表面风压积分法对双塔高层建筑气动力谱进行了研究。
Based on the wind tunnel test, aerodynamic modal force spectrums of twin-tower tall building are studied using surface integral method of rigid model.
以郑州大上海步行街中心广场膜结构屋盖为工程背景，进行了刚性模型的同步测压试验。
Taking an open membrane roof, which covers the central square of Great Shanghai Pedestrian Street in Zhengzhou City, as an example, a wind tunnel test on a rigid model was carried out.
为此对双腹板、顶底角钢半刚性节点的试验数据进行分析，绘出试件各组合件关键点的荷载-应变关系曲线。
Then the experimental data of joints of top and seat angle with double web angle are analyzed and load-strain curves of member subassemblages key points are drawn.
通过试验结果与理论、规范比较，考察了不同荷载水平作用下半刚性连接对组合梁性能的影响。
The effect of semi-rigid connections on the performance of composite beams with various loadings was compared with predictions and codes.
本文通过静压小桩复合地基载荷试验及分析，研究了预制静压桩复合地基桩土相互作用变化规律及刚性桩复合地基承载力设计计算方法。
Based on the site loading experiment on SPIMP composite foundation, the interaction between pile and soil are studied in detail and the internal force analysis method is put forward.
介绍了在灌注式半刚性路面材料研究方面的部分室内试验成果。
Introduces partial test results of research about the semi-rigid pavement material by pouring.
本文采用刚性模型风洞试验研究开孔结构风致内压特性。
Wind tunnel tests of rigid structural model are carried out to investigate the internal pressure of structures with openings.
在刚性金属容器-活塞压力设备中，进行颗粒层受压破碎过程的试验研究。
In rigid metal containers, that is piston pressure equipment, experimental study on compression crushing of granular layer is carried out.
在分析带帽刚性桩复合地基试验成果的基础上，提出复合桩土应力比的概念，以合理反映带帽桩复合地基的力学性状。
The conception of stress ratio of composite pile-soil was put forward on the basis of test data of composite foundation of rigid pile with cap to describe its mechanical behavior.
通过大量激振试验，对刚性桩复合地基的地震反应性态、柔性容器的效果等问题进行了研究。
Through a number of shaking table tests, the aseismic behavior of rigid pile composite foundation and the effect of the flexible wall container were investigated.
承压板法变形试验根据承压板的刚度分为刚性承压板法和柔性承压板法，两种试验方法的适用范围在规程中均有相应的规定。
According the stiffness of bearing plate, the deformation test of bearing plate method is divided into rigid bearing plate method and flexible bearing plate method.
采用刚性模型风洞试验研究结构开孔时的内部风效应。
Wind tunnel tests of rigid model were carried out to investigate the internal wind effect for structure with openings.
通过分析工程车辆稳定性能，确定其典型失稳工况，提出了工程车辆设计和使用中提高稳定性的思路，试验结果剖析了附着失稳及刚性失稳的现象。
Based on the stability analysis of construction vehicle, it puts forwards a new method to increase the stability performance. The experimental results show the method is effective.
初步确定了半刚性材料的动态模量的试验方法。
The testing method of dynamic modulus for semi-rigid materials is submitted initiatively.
劈裂试验是检测半刚性基层材料抗拉强度的一种方法。
The splitting experiment is one way to test the tensile strength of semi-rigid base material.
对比试验分析了刚性及柔性材料模型的压力系数。
The coefficient of wind pressure of rigid and flexible material models are tested in contrast.
本文通过刚块动力模型试验，对具有光滑表面刚性块体的动、静摩擦系数关系进行了初步探讨，并以模型试验结果验证了离散元数值模型的正确性。
The relationship between static and dynamic friction coefficients of the rigid blocks with smooth surfaces has been studied preliminarily by means of a dynamic test of rigid blocks in this paper.
使用LS - DYNA软件建立了薄壁扁球壳结构撞击刚性板的有限元模型，并通过试验结果对模型的有效性进行了验证。
The finite element model of shallow spherical shell structures impacting a rigid plate is developed using the software LS-DYNA.
所完成的现场试验表明，与刚性阀瓣相比，新型柔性阀瓣在介质压力作用下同样能迅速开启、稳定排放介质和及时有效的回座。
The completed field tests show that the new type flexible disc also can open quickly, discharge stably, and reseat timely and effective under medium pressure comparing with the rigid disc.
室内试验主要围绕母体骨架材料、灌注乳浆材料以及灌注式半刚性混合材料三个方面进行了系统研究。
These experiments are cemtred on three aspects to make a systematic studies. These aspects are a parent skeleton material, a pouring emulsion slurry and a pouring semi -rigid mixture.
在刚性建筑模型风洞测压试验的基础上，首先求出脉动风致等效目标响应。
Based on the pressure measurements of wind tunnel test on a rigid structural model, this paper first calculated the equivalent objective responses induced by fluctuating wind.
经加工试验表明，改造后的铣齿机扩大了加工范围，增强了刚性，大大提高了机床性能，具有很高的性价比和实用性。
The new machine is proved to enlarge the range of the machining, improve the rigidity and the performance with high value and practicability.
经加工试验表明，改造后的铣齿机扩大了加工范围，增强了刚性，大大提高了机床性能，具有很高的性价比和实用性。
The new machine is proved to enlarge the range of the machining, improve the rigidity and the performance with high value and practicability.
应用推荐