同时对模套壁厚作了强度和刚度计算。
The strength and stiffness of wall thickness of the mould sleeve was calculated.
现行桩的刚度计算大都假设桩为刚性。
In mest current methods for computation of pile head stiffness, pile is supposed to be rigid.
对底部框架—抗震墙房屋的侧移刚度计算进行了简化。
It has been simplified to calculate later stiffness of masonry building with frame-wall structure at bottom floors.
为我公司今后在强度、刚度计算方面提供了一种新的方法。
It provides a new method about strength and rigidity calculation for our company in the future.
本文介绍了立式精密轴系中转轴的刚度计算与其尺寸确定的方法。
A method of calculating stiffness and determining dimension of shaft of precision vertical bearing system is described in this paper.
使用热刚度计算理论,进行了不同温度场和不同结构材料的热颤振特性研究。
The thermal flutter characteristics of structure in different temperature and different material are researched using the thermal stiffness analysis method.
根据塑料管材环刚度计算公式绘编成计算图,该图显示出塑料管材的固有特性。
Based on formula of loop stiffness for plastic piping, calculating chart was drawn which showed inherent features of plastic piping.
本文介绍了应用计算机寻求机床主轴部件最佳跨距,进行刚度计算的原理和方法。
This paper introduces fundamentals and a method to search the optimum spans for machine tool spindle in rigidity calculating by means of computer.
其次,由轴向定位预紧轴承受径向载荷时各滚子的变形,推导出轴承的径向刚度计算公式;
Second, the calculation formula of radial rigidity is deduced according to the deformation of rollers under the radial load with axial position preload.
利用有限元法对飞机闭合薄壁剖面杆结构进行刚度计算,其结果与全尺寸试验值吻合较好。
The rigidity calculation of the closed thin - walled section rod structure of aircraft is carried out by using finite element method and the result tallies with the full - scale test value well.
介绍了剖分式天轮的力学模型,并用有限元方法对天轮及螺栓进行了强度和刚度计算分析。
In this paper the author offers the force model for the head sheave of a mine hoist. It calculates and analyzes its strength and stiffness with the Fimite Element Method.
介绍CNC30数控车床主轴组件的性能要求和组成,以及主轴轴承、主轴组件的刚度计算。
The performance requirement, composition of spindle unit and the rigidity calculation of spindle bearing and unit for CNC30 nc lathe are discussed in this paper.
梁产生弯曲变形时,我们无论是进行强度计算还是刚度计算,梁的弯矩都是非常重要的一个量。
When a girder becomes curved or deformed no matter whether we make a strength calculation or a rigidity calculation, the camber of a girder is always a very important measure.
在机构强度分析中,阐述了凸轮-针轮副啮合齿面接触强度、针齿销的弯曲强度计算和刚度计算。
Not only the contact strength between the CAM and the rollers is discussed, the flexural strength and rigidity of the rollers are also discussed.
在巷道金属支架的设计与计算中,不但要对结构进行强度和刚度计算,而且还要进行稳定性的验算。
In designing and calculating the tunnel metallic support, not only the structure's strength and stiffness should be calculated, but also the stability should be checked.
在搅拌器现有参数的基础上,通过对搅拌器空心轴的强度及刚度计算,得出了空心轴的最佳直径值。
On the basis of the existing parameter of an agitator, by calculating the strength and rigidity of the hollow shafting in an agitator, we get the optimum diameter of the axle.
工程化的轴箱定位刚度计算公式具有较高的计算精度,有利于轴箱定位橡胶元件的设计、制造和测试。
The engineering calculation formula is with a high accuracy and is useful for the design, production and test of the positioning rubber components of the axle box.
按线性基础计算的动力响应大于非线性基础的响应,因此采用等效线性基础刚度计算动力响应是可行的。
The dynamic response of linear simulation is greater than that of non-linear simulation , so the dynamic response could be determined based on equivalent linear foundation stiffness.
介绍了现浇钢筋混凝土空心无梁楼盖结构体系的原理、边支承空心楼盖设计原理、刚度计算等方面的问题。
This paper introduces the design principle of cast-in-situ reinforced concrete hollow floor, the design method of side supporting hollow floor, stiffness account and so on.
文章以BKX - I型变轴数控机床为研究对象,利用矩阵结构分析法建立了变轴数控机床的静刚度计算模型。
In this paper, by using the method of matrix structural analysis, the static stiffness model are derived from researching BKX-I varied-axis NC machine tool.
文中用集中载荷法对30万千瓦汽轮机推力盘进行了强度和刚度计算,并提出了改进推力盘强度和刚度计算方法的意见。
Calculations are made in the article on a 300MW steam turbine with its thrust collar under concentrated load. As a conclusion, the authors suggest the modification of triditional calculation method.
通过这些信息他们可以计算出加入石墨烯后高分子复合材料的刚度改进。
From this information they calculated the improvement in stiffness the graphene gave to the polymer composite.
我们跑应力有限元分析计算,确定了框架需要得到加强的最大强度和刚度,然后加强这些领域更多的碳纤维。
We ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.
所述分析方法可推广到其它直线桁梁的抗剪刚度的计算。
This method can be used in other shear stiffness calculations for straight line truss.
几何非线性单元的精度主要决定于单元恢复力的计算方法,刚度矩阵对单元精度的影响很小。
Method for computing the element restoring force, rather than the stiffness matrix, is the most important factor that determines the accuracy of a geometric nonlinear finite element problem.
基于经典弹性板壳理论推导管壁变形解答,得到管壁变形的解析表达式,并以此计算管壁变形刚度。
After compared with the result of tests and fitting formula, it is reasonable to deduce the resolution of tube wall stiffness based on the elastic theory.
通过分析得出了被加固梁最佳支承刚度的计算方法,以及与其对应的最大承载力的计算方法。
This paper gives a method of calculating the optimum support rigidity of the reinforced beam and calculating the corresponding greatest bearing capacity.
螺旋槽干气密封试验分析了干气密封螺旋槽几何参数对开启力、功耗、泄漏率和气膜刚度的影响,并通过理论计算对试验数据给予了验证。
The influences of the spiral groove parameters on the opening force, power loss, leakage rate and stiffness of gas film were investigated by the experimental test.
计算还揭示了局部刚度损伤对结构局部阻尼特性、振动能量分布和阻尼耗能行为的影响。
Moreover, the effect of local stiffness damages upon the local damping properties, vibration energy distribution, and the behaviors of damp dissipation of structures are investigated separately.
计算还揭示了局部刚度损伤对结构局部阻尼特性、振动能量分布和阻尼耗能行为的影响。
Moreover, the effect of local stiffness damages upon the local damping properties, vibration energy distribution, and the behaviors of damp dissipation of structures are investigated separately.
应用推荐