• 人力作用下,通过手柄转动动力传到刀盘

    Role in human, by turning the handle to power the cutter reached.

    danci.911cha.com

  • 根据斜角直线齿形造形方法设计齿锥齿轮刮削刀盘不再一个圆锥面,而是一个双曲面

    Spiral bevel gears carbide skiving cutter has designed by method of inclination cut and straight line profile, and the generating surface of cutter is hyperbolic but conic.

    dict.cnki.net

  • 方法通过刀盘一面旋转,一面平移形成齿条媒介齿条)的原理来实现的。

    While the cutter rotating and moving at one time, and forming the medium gear, gears machining was implemented with this method.

    dict.cnki.net

  • 系统动力学建模理论方法研究基础进行专用旋转刀盘虚拟样机技术研制开发

    This paper takes multi-body system dynamics modeling and simulation method as foundation, research and development of virtual prototyping of special machine rotating cutter are implemented.

    www.dictall.com

  • 论述弧齿锥齿轮两个重要参数——轮齿收缩型式刀盘直径正确选择

    The paper describes the selection of two important design parameters-tooth ta-per and cutter diameter.

    dict.cnki.net

  • 该机工作部分为

    The machine work into cutting disks.

    huibangjx.cn.alibaba.com

  • 提出齿锥齿轮数控加工直接插补算法确定齿刀盘中心运动工件齿轮旋转运动之间关系

    A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear.

    www.dictall.com

  • SBS塑料粉机工作部分为

    SBS plastic roller mill work into cutting disks.

    www.shengyidi.com

  • 齿轮加工齿轮啮合、产运动具有相同线速度

    During shape gear was toothed with gear machined, the movement of cutter head, shape wheel and wheel blank had same thread speed.

    dict.cnki.net

  • 设计了一个盾构掘进机驱动液压系统系统开式液压系统,应用电比例控制技术实现了泵排量实时调节。

    A hydraulic drive system of cutter head in shield tunneling machine was designed, which is open type hydraulic system and controlled in open-ring.

    www.dictall.com

  • 独特设计使筒状薄膜切断准确可靠

    The special cutter head designing, make the film-rolling cut more exactly and reliably.

    danci.911cha.org

  • 设计盾构转速液压驱动系统

    A hydraulic variable speed drive system of shield disk cutter has been designed.

    dict.cnki.net

  • 根据参数,选用合适倾角采用新的展成法圆满地解决了失配控制加工这种齿轮关键性问题

    The key problem of mismatch control and manufacture of symmetric arc-shaped gears is perfectly solved by using suitable cutter tilt and new generating method.

    dict.cnki.net

  • 弧齿锥齿轮刮削刀盘采用斜角切削,在刮削过程工作角度发生了变化

    The sCraping cutter is used with an oblique angle to cut a gear, and the working angle is changed during scraping.

    www.chemyq.com

  • 这样减少负荷提高磨粉效率使粉料得到均匀冷却

    This reduces the knife dish load, and improve efficiency, and grinding can make powder get uniform cooling.

    www.shengyidi.com

  • 上下间隙重叠调整机构回转机构锁紧机构进行分析说明

    The adjusting mechanism for space and lap between upper and lower cutter head, cutter head traversing and locking mechanism etc. have been analyzed and introduced.

    www.chemyq.com

  • 切碎刀盘系统动态数学模型基础本文分析了刀盘系统稳态条件下对单位脉冲扭矩函数响应

    On the basis of dynamic mathematical model established for flywheel system in flywheel-type forage cutterhead, the response of the system to pulse form unit torque is analysed in this paper.

    dict.cnki.net

  • 仿真结果表明刀盘转速液压驱动系统能够实现输出流量系统负载改变改变负载适应

    The simulation result shows that the system can realize the variation of pump output volume with the changing system load, i. e. load adapting.

    dict.cnki.net

  • 本次设计题为数控加工中心控制PLC(可程序控制器控制实现功能

    The design of CNC Machining Center Tool Library, entitled Control, knife set by the PLC (programmable logic controller) control to achieve its functions.

    www.queshao.com

  • 同时,运动学分析工作,也动力学分析相互关系的组合选择切削机构位置布置结构设计分析提供了前期理论分析基础

    Kinematics analysis provides prophase theoretical fundament for analysis of dynamics, choice and combination of bar length, position of cutters, design of structure, and so on.

    dict.cnki.net

  • 重点阐述了部分设计机构结构参数计算转动电机计算选择

    It primarily expounds design of tool rest and structural parameter calculation of groove wheel, and calculation and choose of tool magazine rotating motor.

    www.chemyq.com

  • 采用齿刮削齿锥齿轮齿进行刮削加工时,切削刃采用斜角直线造形法,切削刃较大造形误差重磨误差较大

    Because the profile of skiving cutter with plane flank for Gleason gear is a straight line with an angle λ, the tolerance of the designed profile and the tolerance of the reshaped profile are great.

    www.dictall.com

  • I乳化机后的瞬间经过高速旋转的,使中的蛋白质充分活化

    BRHJ-I emulsifier activate and emulsify meat fully by cutting grinded grains with multi-blade knife plate at high speed.

    www.whquanli.com

  • 系列削片机机座进料罩壳电控系统部分组成。

    The series of disc chippers is made up of seat, cutter disc, feed inlet port, shell, electric control system, etc.

    www.wood365.cn

  • 机床动力刀盘结构床身结构夹具平台结构电气控制系统等五大部件组成

    The machine consists of power head, cutter structure, bed structure, fixture platform structure, electrical control system, etc.

    www.lmdzjxc.com

  • 重点介绍端面内外倒设计安装,并对各的特点应用场合进行了比较

    The design, installment and position of three kinds of cutter adapters used to machining welded steel tube's faces are introduced.

    www.dictall.com

  • 重点介绍端面内外倒设计安装,并对各的特点应用场合进行了比较

    The design, installment and position of three kinds of cutter adapters used to machining welded steel tube's faces are introduced.

    www.dictall.com

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定