特殊的刀具设计，切角锐利。
开创了刀具设计智能化方向的一个新途径。
论述螺旋面外铣、旋风铣两种情况刀具设计问题。
The problem of the design of the knife in milling helical face in and out is emphasized.
摘罗要：盾构机刀具配置是盾构机刀具设计中是非常重要的内容。
Abstract: : TBM(Tunnel Boring Machine) Cutting Tools Configuration is one of the most important factor during TBM cutting tool design.
采用镗削加工工艺加工硬度较高材料的椭球孔，并探讨刀具设计方法。
To adopt boring technology to process hole alike ellipse sphere in the harder material and to explore devising method of cutting tool.
切削力的理论计算及其准确预报是金属切削领域和刀具设计的重要课题之一。
The theoretical calculation and prediction of cutting forces is important in metal cutting research and cutting tool design fields.
本文在分析干切削加工对刀具要求的基础上，阐述了干切削刀具设计的要点。
After making an analysis of requirements for tools used in dry machining, the main points in the design of cutting tools for dry machining are ex-pounded.
最后较为全面、系统地讲述金属切削机床、机床夹具和刀具设计原理和方法。
Finally, design principles and methods of designing metal cutting machine tools, clamps of machine tools and tools are discussed comprehensively and systematically.
在从事机械加工工艺方案拟定、机床和刀具设计等工作时，都离不开对切削功率的估计。
Engaging at the programme of machining processing technic, the designing work of machine tools and bit tools can not be separated from the cutting power.
该模型为非圆齿轮的加工刀具设计、数控加工程序设计以及轮齿强度分析等提供了基础。
This model can be used to design the profile of cutter for the non-circular gear, to find the locus of cutter during machining, and to analyze the teeth strength of non-circular gears, etc.
传统旋风铣削刀具设计方法计算繁杂、重复多、效率低，运用软件检测分析时前期工作量大。
The traditional method of designing whirling tools is complicated in calculation and low in efficience.
根据车轮报废线、止口的工艺要求，设计了专用加工刀具，并对不同刀具设计方案进行了比较。
Based on the technological requirements of the condemning line and limiting slot of railway wheels, the special cutting tools are designed, and two kinds of tool design schemes are compared.
通过对可转位刀具的数控工艺规程的分析，确定了有关可转位刀具设计和加工参数之间的关系。
Based on the analysis of NC machining technology of indexable tool, the relationship between indexable tool design and machining parameters is determined.
金属切割的物理学提供了理论框架，我们必须借助于这个框架检查切割刀具设计的其他所有要素。
Physics of metal-cutting provide the theoretical framework by which we must examine all other elements of cutting tool design.
对锁闭齿轮专用插齿刀的设计进行了研究，并讨论了这种刀具设计的基本方法、计算公式以及设计步骤。
The design issue of the special gear shaper cutter for lock gears is researched. The basic method, calculating formulas and procedure of designing the gear shaper cutter are discussed.
按照此法计算，可使滚刀齿廓上的计算点均匀分布，提高滚刀的设计精度。这种方法可应用于类似的刀具设计中。
With this method, the calculated points distribution of the tooth outline are uniform, thus the design accuracy is increased remarkably.
该拟合曲面可用于虚拟径向剃齿过程，从而生成被剃齿轮齿面，通过与渐开线齿面比较，可检验刀具设计的正确性。
It can simulate the process of radial shaving cutting, and then deduce the gear profile to be shaved. By comparing with the involute profile, the correction of the cutter design method can be tested.
文章着重介绍了圆锯片研究、带锯条研究、刀具磨损和腐蚀、木材铣刀方面的新技术及木材高速切削的一些研究成果，综述了刀具设计和刀具磨损方面新的研究理论。
The article put emphasis upon the introduction of circular saw blade research, band saw blade research, wear and erosion of cutting tool, the new technique in aspects of timber milling c...
公道设计刀具的切入与切出的方向。
为材料的去除工艺而成功设计的刀具，首先需求的是对工具功能和形状的彻底了解。
Successful design of tools for the material removal processes requires, above all, a complete understanding of cutting tool function and geometry.
特殊设计刀具系统，刨槽深浅可调节。
The slot depth can be adjusted for the special designed cutters.
同时，提出了任务调度规则和刀具管理的设计方法。
Moreover, the solutions to control rule and cutting tool management are presented.
刀具的设计者必须配合许多的可变因素来提供最好的切割形状。
The tool designer must match the many variables to provide the best possible cutting geometry.
变位齿轮可以有效突破标准渐开线齿轮存在的使用局限性，但在某些情况下必须采用专门设计的刀具加工。
Modified gear can break through the limit of spur gear in using. But modified gear must be manufactured with special design tools in some conditions.
刀具运动轨迹设计质量的好坏，将直接影响零件的加工质量及加工成本。
Whether the tool path quality is good or bad will directly affect the machining and the machining cost of part.
在齿轮加工过程中，刀具及夹具的设计也尤为重要。
During the procedure, the design of grip and cutter is also important.
提出了对称型双向分布的梯度功能陶瓷刀具材料的设计模型。
A model for designing functionally gradient ceramic tool materials with symmetrical composition distribution is presented.
针对复杂型面刀具的设计要求和结构特点，研究开发了一种基于点采集的高精度非接触式激光扫描测量系统。
Aiming at the design demand and structure character of complex surface tools, a high precision non-touching laser scanning system based on point sampling was studied and developed.
针对复杂型面刀具的设计要求和结构特点，研究开发了一种基于点采集的高精度非接触式激光扫描测量系统。
Aiming at the design demand and structure character of complex surface tools, a high precision non-touching laser scanning system based on point sampling was studied and developed.
应用推荐