以聚氨酯橡胶代替通常钢模中的凹模或凸模是比较有效的方法之一。
It's one of best methods to use polyurethane rubber rather than usual cavity or core in steel die.
根据具体情况随时可以快速调换相应的凸模和圆凹模，及转盘的快速定位，类似于数控转塔冲床，来达到加工产品多品种的要求。
We could quickly change punch and round concave at anytime production required, the quick location of turntable like nc revolving tower type press machine, it could produce many kinds of productions.
冲裁间隙是指冲裁凸模和凹模之间工作部分的尺寸之差。
Blanking gap is the difference size between the male die and female die's work part.
通过理论分析，概率修正和实验验证，确定出利用柱形凸模、锥形凹模一次拉深锥形件的极限拉深比。
Through theoretical analysis, probability revisal and experimental test, the limit drawing ratio of a tapered cup drawn by cylinder convex punch and tapered concave die is determined in tis paper.
该模具的凸模和活动凹模镶块分别在斜楔和楔形滑块作用下水平相向运动完成冲裁。
By controlling the wedge block and springs, its punches and movable plate blocks achieve the horizontal punch movement.
介绍了多工位数控冲床用百页窗模具的设计，重点介绍了下装凸模、上装镶拼凹模及卸料板的设计和计算方法。
This article introduces the design of louver tooling for turret punch press, mainly focusing on the design and calculation of die, punch body and stripper plate.
凸模产生的裂纹相对于凹模产生的裂纹向里移动一个距离。
The male die's gap opposite female die's gap move one distance outward.
分析了冷挤压毛坯质量对模具的工作部分（上、下凸模和凹模）的损坏形式和寿命的影响，指出了保证毛坯质量应采取的措施。
The effect of blank quality in cold extrusion on the damage way and service life of working parts (mould and die)is analysed, and some countermeasures presented.
本文分析了人机结合对CAD系统设计的影响，论述了HPC系统凹模、凸模和挡料装置设计模块中的人机交互作用。
The influences of man-machine combination on the design of CAD system, the man-machine interaction in the die, the punch and the stock stop design modules of HPC system are discussed.
介绍了硅钢片硬质合金复合冲模与凸模、凹模、凸凹模等的制造方法。
The processing methods of compound punching die convex die concave die and die of convex and concave for silicon steel piece cemented carbide are provided.
凸模和凹模，可根据客户要求进行精加工，表面光洁度高，公差准确。
Punch and die, according to customer requirements for finishing, surface finish, tolerances.
该模具将凹模设计成活动式，凸模固定。
The female die was designed movable but the male die was fixed.
研究表明不同可控拉深筋路径对盒形件侧壁和凹模圆角部位的应变路径影响不大，而对凸模圆角处的影响较为显著。
The results show that the different CD moving paths have little effect on the strain paths of box sidewall and die corner, which have significant effect on punch corner.
结果表明，凸模和凹模交界处的板料首先变形，应力及应变最大值出现在凸模圆角部位外侧板料上。
The results show that the sheet in the adjacent area of die and punch deforms primarily. The maximal value of stress and strain appears in the sheet of outboard punch round corners.
文章在对零件的工艺性进行认真分析的基础上，有针对性地设计了模具结构中的凸模和凹模，优化实现了矩形拉伸件的分离冲切过程。
After analysis of process of components, design raised mold and the concave mold in the structure of molds, optimize the pressing-cutting process for the rectangle stretched component.
介绍了多弯弯曲件冲模的凸模、凹模结构。
The structure of the punch and die of a stamping die for a multi-bending component was presented.
平锻机上的凸、凹模，铜合金挤压模，镶块，高温工作下的热剪切刀。
Tools for forge machine, die insert, extrusion mould for Cu alloy, hot shearing knives.
由冲裁变形过程的分析可知，决定合理间隙值的理论依据是应保证在塑性剪切变形结束后，由凸模和凹模刃口处所产生的上、下剪切裂纹重合。
According to the blanking distortion procedure, the theory that decide the proper gap is to make sure the edge of the male die and female die's gap can be superposition.
介绍了硅钢片硬质合金复合冲模与凸模、凹模、凸凹模等的制造方法。
The design method of faceplate oblique edge blanking die, die structure, punch structure and matrix structure were introduced in detail.
介绍了硅钢片硬质合金复合冲模与凸模、凹模、凸凹模等的制造方法。
The design method of faceplate oblique edge blanking die, die structure, punch structure and matrix structure were introduced in detail.
应用推荐