复合铸渗层适合于小能量冲击磨损的工况条件。
The composite layer is adapt to status of impact wear with low energy.
为此，进行了对此类抗冲击磨损堆焊焊条的研究。
Therefore, impact abrasion resistant surfacing electrode of this kind was studied in this paper.
高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊。
Used for surfacing welding high-Mn steel, including various part of heavy impact abrasion resistance.
研究了中碳含硅贝氏体钢不同组织结构对高应力冲击磨损行为的影响。
The high stress impact wear behaviors of bainite steel containing silicon with different microstructure were studied.
这是因为硅使贝氏体铸钢在高应力冲击磨损下表现出不同的失效机制。
The reason is that the impact wear mechanism is different for low and high Si bainitic cast steels.
实验发现，高应力冲击磨损后，磨损试样表层形成高硬度的白层与变形层。
The experimental results show that the high hardness white layer and plastically deformed zone are developed on the surface layer under high stress impact wear.
深井充填管道输送由于充填倍线小，料浆流速大对管道形成了很大的冲击磨损。
High slurry flow rate had big impact abrasion on pipeline due to small filling times line of filling pipeline transportation system in deep well.
研究了碳、铬含量对珠光体基体低铬铸铁冲击疲劳抗力及冲击磨损性能的影响。
The effect of carbon and chromium content on the impact fatigue resistance and impact abrasion resistance of pearlitic low chromium cast iron has been investigated in this paper.
冲击磨损的指标。车主也需要知道多久减震器已经使用以预期可能损害或需要替换。
Shock wear indicator. Car owners also need to know how long shock absorbers have been in use so as to anticipate for possible damages or needs of replacement.
含有硬粒飞灰的烟气相对于管壁流动，对管壁产生磨损称为冲击磨损，也称冲蚀。冲蚀。
Flue gas containing hard grain of fly ash flow relative to the wall, on the wall wear called impact wear, also known as erosion. erosion.
最后但并非最不重要的，另一件事情是车主常常误解，冲击磨损指标是由经销商提供保修。
Last but not least, another thing that car owners often misunderstand for shock wear indicator is the warranty offered by the dealers.
在冲击磨损条件下，关于高铬铸铁中的残留奥氏体的作用，在国内及国外都有不同的看法。
There are different ideas about the effect of retained austenite in high chromium irons under impact wear conditions.
本发明涉及抗磨损复合材料领域，公开了一种用于抗冲击磨损的复合材 料及其制备方法。
The invention relates to the field of anti-wear composite material and discloses a composite material used for resisting impact and wear and a preparation method.
经对实验照片的分析可知，叶轮入口颗粒径向速度的大小是造成叶轮冲击磨损的主要原因。
Result of analyzing experiment picturesindicates that particle radial inlet velocity component influences significantly the blade erosionmanner.
利用模拟球磨机工矿条件的高能冲击磨损实验装置研究了高能冲击磨损中材料的几种磨损机制。
The wear mechanisms of materials in impact wear with high energy were investigated in the paper by using a tester simulating the conditions of mills.
对冲击磨损试验后试样进行了失重测量，并用SEM分析磨损表面形貌，用OM观察金相组织。
The mass loss after impact-wearing was measured, the morphology on the wear surface of the steel was analyzed by SEM, the microstructure was observed by OM.
本文在分析系统的磨损时，综合考虑了到达过程为非齐次泊松过程的随机冲击磨损和连续累积的常规磨损。
This thesis considers the wear-out process of the system as the sum of an additive compound nonhomogeneous poisson shock wear-out and a continuous routine wear-out in time t.
利用自行研制的落球冲击磨损实验装置，在模拟球磨机的工矿条件下，研究了冲击磨损后样品的组织结构变化。
The falling-ball impact wear tester designed by ourselves was used to investigate the microstructural changes in specimens tested under the condition similar to that of ball mills.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
镍钢也是有弹性的，就是说它能经受震动、冲击和磨损。
Nickel steel is also elastic, that is, it can stand vibration, shocks and wear.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
冲击磨料磨损是一种极恶劣的磨损工况。
Impact abrasive wear is one of the worst conditions on abrasion.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
这对承受严重冲击的抗磨料磨损的机件来说，具有重要的意义。
It favours the parts which is used to resisted the abrasive wear in severe impact work.
用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。
The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.
冶金矿山湿式磨机衬板，使用工矿条件恶劣，既受腐蚀又受冲击和磨损。
The liner of the wet-grinding machine at metallurgical mines works under very bad conditions, and it has to bear impact, corrosion and abrasion.
同时，在各个冲击功下，材料的磨损机理在冲击应力的循环作用下随时间发生明显变化。
Furthermore, at all impact power, the wear mechanism of the material changes distinctively with the time under the cyclic impact stress.
这种加强的负作用通常是抗冲击强度降低及磨损性增加。
The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.
本文论述了不同碳含量碳素钢的组织形态与抗冲击磨粒磨损性能的关系。
This paper deals with the relation of the microstructure morphology of carbon steels to its impact abrasion resistance.
本文论述了不同碳含量碳素钢的组织形态与抗冲击磨粒磨损性能的关系。
This paper deals with the relation of the microstructure morphology of carbon steels to its impact abrasion resistance.
应用推荐