提出了一种新的冗余容错电路设计方法。
A new design method of redundant fault-tolerant circuits was proposed.
采用冗余容错技术可以提高系统的可靠性。
And using techniques of redundancy fault-tolerance can improve reliability.
对冗余容错技术、故障诊断技术进行了研究，给出了嵌入式安全容错处理器的软硬件实现方法。
The fault-tolerant technology and fault diagnosis technology are studied in detail, and presents the realization method for hardware and software of embedded safety fault-tolerant processor.
可以通过冗余(冗余的磁盘、计算机以及数据中心)来提供容错，但是事务使得构建容错的软件应用程序成为可能。
Fault tolerance can be provided by redundancy — redundant disks, computers, and even data centers — but it is transactions that make it practical to build fault-tolerant software applications.
本文基于解析冗余原理，提出用信号重构的方法来实现单个阀位传感器故障下的容错阀门管理。
This paper presents the fault tolerant strategy of valve management under the failure of valve opening sensor via signal reconstruction.
除了连接冗余电源外，还可以连接支持容错环状拓扑的特殊电源，即可中断其中任何一个交换机。
In addition to the connection of redundant power supplies, special power supplies support fault-tolerant ring topologies, meaning that a disruption can be restricted to a maximum of one switch.
冗余是指系统有一定的容错能力。
Redundancy indicates that the system is fault -tolerant to a certain degree.
可进化硬件不是采用传统的静态冗余技术，而是利用其本身固有的特性实现容错。
EHW implements fault tolerance not by means of static redundancy technology but the intrinsic feature of itself.
例如冗余和高容错等传统上与DCS系统相关的功能，正越来越多地通过SCADA系统提供，价格通常仅是DCS的一小部分。
Functions such as redundancy and high fault tolerance, that are conventionally associated with DCS systems, are being increasingly offered by SCADA systems, often at a fraction of the price.
而容错技术在允许系统内部发生故障的情况下，通过信息冗余方式，保证系统仍能可靠运行。
When network failures happen, the fault-tolerant technology can guaranteed the network system still could reliably move through redundant Information.
在设计控制系统中，采用了硬件冗余和软件容错技术，使得整个系统的可靠性大大增强。
In designing the control system, the hardware redundance and the software tolerance technology are adopted. It greatly enhances the reliability of the control system.
利用现有的商用并行、分布式计算机系统本身所固有的冗余可以实现低成本的容错。
Low cost fault tolerance can be achieved by utilizing the inherent redundancy of the off-the-shelf commercial parallel and distributed computer systems.
接着，对电源中的容错技术和冗余技术的基本概念作了简要的阐述。
Then, the paper gives brief introduction on the basic concept of fault tolerance and redundance technique in power supply.
用马尔可夫过程，对双机热冗余可修复容错控制系统的可靠性进行了分析，得出了有关的计算公式。
The Markov method is used to analyse the reliability of dual hot - redundant reparable fault tolerant control system, and some calculating formula are derived.
本文提出软件容错技术和硬件冗余技术相结合，大大提高了控制系统的可靠性和安全性。
In industry control system, it can greatly improves the reliability and safety of the system when using the software tolerance and hardware techniques together.
实现了容错冗余。
RAID是廉价冗余磁盘阵列的简称，它把多磁盘驱动器连接到一起协同工作，提供并行的数据传输和容错功能。
RAID Redundant Array of Inexpensive Disks, groups many disk drivers in a storage unit to perform parallel data transfer and offer fault-tolerant.
文章介绍了SPEEDTRONIC MARKV (TMR)的硬件、软件及主要功能，并分析了该系统的接口，硬件三冗余及软件容错技术。
This paper introduces the hardware, software and main function of SPEEDTRONIC MARK V, and analyses the interface of this system, TMR and SIFT technology.
传统的服务器容错模型大多采用复制和冗余机制，给系统造成大量垃圾。
Most of traditional fault-tolerant model adopt copy and redundance mechanism, therefore a large number of the rubbish is made in system.
模块式结构是一种容错系统，小型化模块使得储备冗余技术得以实现，大大提高了系统寿命。
The modular construction design results in a kind of fault-tolerant system. The small-scale modules make system redundancy technology available, which improves system life greatly.
针对空间4r冗余度机械臂活动关节工作空间进行了定量研究，并且对其容错空间做了进一步探讨。
The paper carried out the quantitive study of the workspace of a spatial 4r redundant manipulator and explored its fault tolerant workspace.
最后，对它的可靠性进行了分析，并给出在同样的冗余下，它与备份形式的存储器容错结构的可靠性比较结果。
Finally, the reliability has been analysed and the reliability comparison result with strand-by memory fault-tolerance structure in the same redundancy has b...
本系统采用了冗余技术和容错措施：系统中的通信过程采用了自适应协议和CRC差错检验；
The system adopts redundancy technique and error proof measure: communicating process uses a self-adapting protocol and CRC;
在软件部分，采用模块化设计，使用软件冗余技术和容错技术增强软件的可读性。
As to software, the method of modular design, the use of software redundancy and fault-tolerant technology enhance the readability of program.
容错技术广泛应用于各个行业来保证系统的冗余和可靠性。
Duplex redundancy technology is wildly applied in various industries to guarantee the robustness of the system.
最后，对它的可靠性进行了分析，并给出在同样的冗余下，它与备份形式的存储器容错结构的可靠性比较结果。
Finally, the reliability has been analysed and the reliability comparison result with strand-by memory fault-tolerance structure in the same redundancy has been given.
最后，对它的可靠性进行了分析，并给出在同样的冗余下，它与备份形式的存储器容错结构的可靠性比较结果。
Finally, the reliability has been analysed and the reliability comparison result with strand-by memory fault-tolerance structure in the same redundancy...
另外，多电机同步联动为容错控制提供了硬件冗余，本文在最后针对系统的容错控制进行了方案规划和程序设计。
In addition, as adoption of the four-motor driving mode, a kind of error-tolerance control is made possible, its project programming and software design are introduced.
另外，多电机同步联动为容错控制提供了硬件冗余，本文在最后针对系统的容错控制进行了方案规划和程序设计。
In addition, as adoption of the four-motor driving mode, a kind of error-tolerance control is made possible, its project programming and software design are introduced.
应用推荐