将当量热节概念应用于冒口设计，提出了冒口的当量热节设计法。
An equivalent hot spot design method for riser was designed through application of equivalent hot spot in riser design.
系统主要功能包括：通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。
This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.
根据体收缩原则，研究了适用于模具镶块铸钢件加发热覆盖剂保温的冒口设计工艺。
Based on the principle of volume contraction of freezing, the designing process of riser fitting to the cast steel inserted die with exothermic covering flux has been studied.
对倾斜浇注工艺特点、冒口设计、倾斜高度和防止铸件变形等作了详细介绍并举出应用实例。
Technique character, riser design, tilting height and deformation avoiding of casting in tilting pouring casting process for cast steel has been introduced with examples.
本模块用模数法进行冒口设计，采用直接三维模数计算方法，可快速、准确地进行模数计算。
The design process can be quickened and simplified through calculating casting modulus directly in 3d environment.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。
The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
在铸钢件冒口设计中，模数法是一个广泛应用的计算方法，三次方程解析法是模数法中较为严密的计算方法。
In riser design of steel casting, modulus method is the most widely used method, and the cubic equation method is a most close method in modulus method.
根据浇冒口设计理论和生产经验，开发了中小型球铁件压力冒口和控制压力冒口工艺设计程序，并进行了实际生产应用。
Based on risering and gating theories and practical experience, a computer program used to design pressure risering and pressure control risering system was developed.
本文运用卡赛浇冒口设计方法，结合生产经验，采用FOXBASE程序软件，开发了铸件无冒口或小冒口工艺设计程序。
Based on the design method of S. I. Karsay gating and risering and practical experience, Usering FOXBASE program software used to design riserless or small riser system was developed.
介绍了球铁件锥形冒口的原理和设计方法。
The principle and design of tapered feeder for ductile iron castings were introduced.
实践证明采用均衡凝固收缩模数法设计液压试验平台浇冒口系统是可行的。
The practice shows that it is feasible to design kiss gating-feeder of hydraulic test platform by applying moduli calculation method.
同时为了满足工艺设计的要求，对铸件本身和浇注系统、冒口的质量进行了精确统计。
At the same time, the weight of castings, riser and gating system is calculated accurately to meet the demand of the process design.
基于改进Q参数法，对杂质泵合金白口铸铁件的冒口尺寸进行设计求解，所得结果用于生产中，铸件健全。
Based on the modified version of Q-method, a new riser design for the alloy white iron castings of slurry pump was made.
本文介绍了西班牙对汽车铸铁件浇冒口系统的设计方法及其设计特点。
Design and characteristics of gating system for cast iron in Spain automobiles have been described.
冒口的当量热节设计法，概念直观，计算简单。
The equivalent hot spot method for riser design has the advantages of direct visual and simple calculation.
设计方法采用比例法和模数法，实现了常用冒口的设计。
There are two methods to design riser for steel casting, one is proportion method, and the other is modulus method.
根据均衡凝固理论设计工艺，采用阶梯式浇注系统，压边冒口和冷铁，取得了满意效果。
The foundry method was designed based on the Proportional solidification theory. Step gating system, connor risers and chills were adopted. Successful result was obtained.
并设计了东风eq 140汽车活塞的保温冒口。
Meanwhile, an insulating riser for piston of Dong-Feng EQ140 automobile was designed.
运用大孔出流理论设计了顶注压边浇冒口系统。
Based on the large orifice discharge theory, the kiss gating system of the casting was designed.
以模拟程序为工具，用正交设计方法分析了锭身锥度、锭身高径比、冒口侧壁保温条件、冒口端部保温条件及冒口锥度等工艺参数对钢锭质量的影响。
By use of the orthogonal analysis method and the FEM programs the influence of several process factors on the quality of steel ingots is investigated.
该技术能提高冒口工艺设计效率与精度，缩短设计周期，保证产品质量，提高工艺出品率。
The technology can improve riser design efficiency and accuracy, shorten the design period and ensure the casting quality, and increase casting process product yield.
系统实现了冒口工艺的自动设计，为模拟验证乃至实际生产提供较佳的推荐方案。
The results show the designed risers are reasonable. This system realized the automatic building of risers. It can provide a proximal optimum process for CAE valuation and even practical production.
系统实现了冒口工艺的自动设计，为模拟验证乃至实际生产提供较佳的推荐方案。
The results show the designed risers are reasonable. This system realized the automatic building of risers. It can provide a proximal optimum process for CAE valuation and even practical production.
应用推荐