用傅立叶红外光谱仪测定羧基含量。
Determine carboxyl content with Fourier infrared spectrum instrument.
傅立叶红外光谱仪观察生成物的特征峰。
Fourier transform infra red spectrometer observation of the characteristics of resultant peaks.
运用傅立叶红外光谱仪(IR)对反应产物进行了分析。
The product was analyzed by Fourier infrared spectroscopy (IR).
建立了用傅立叶红外光谱仪快速检测聚丙烯中二苄叉山梨醇类透明剂含量的方法。
A method for rapid quantitative determination of dibenzylidene sorbitol clarifying agents in polypropylene (PP) by Fourier transform infrared spectrophotometry (FTIR) was developed.
应用傅立叶红外仪测量了薄膜的红外谱，用共面蒸铝电极法测量了薄膜的光电导。
We got the infrared spectra by The Fourier Transform Infrared (FTIR) spectroscope and measured the thin films' photoconductivity using Coplanar Aluminum Plating Electrode methods.
采用X衍射、傅立叶红外和扫描电镜技术分析了矿化产物的晶体结构和形貌特征。
The structures and morphologies of the mineralized products were characterized using XRD, FTIR and SEM techniques.
傅立叶红外分析表明PFZSS中既有以羟基桥联的铁的聚合物，也有以羟基桥联的锌的聚合物。
Infrared analysis showed that there were hydroxy-bridged iron to the polymer and hydroxy-bridged zinc to the polymer in PFZSS.
通过傅立叶红外光谱和氢核磁谱（1H NMR）测试表明所合成的丙交酯和乙交酯具有环状结构。
The resulted D, L-lactide and glycolide were found to have ring structure by fourier transform infrared spectrometry and proton nuclear magnetic resonance(1H NMR) spectrometry.
合成了可uv固化的聚氨酯丙烯酸酯，并利用傅立叶红外光谱对其合成过程及固化涂膜进行了表征。
UV curable polyurethane acrylates (UVPUA) were prepared, and the synthesis process and cured films were monitored by Fourier Transform Infrared (FTIR).
采用傅立叶红外光谱（FTIR）和X光电子能谱（XPS）对预处理前后PVDF中空纤维膜表面化学结构进行分析。
The surface compositions of the pretreated PVDF membrane were determined by Fourier transform adsorption spectrum (FTIR) and X-ray photoelectron spectroscopy (XPS).
采用扫描电子显微镜(sem)、X射线光电子能谱仪(XPS)、傅立叶红外光谱仪(IR)对盘上磨痕进行表面分析。
The surface of the wear scar was analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier infrared spectroscopy (IR).
傅立叶红外光谱(FTIR)及表面电子能谱(esca)分析表明第一步的GMA和第二步的肝素已依次接枝到PVC表面。
Analysis of Fourier Transform Infrared (FTIR) and Electron Spectrascopy for Chemical Analysis (ESCA) proved that GMA and heparin had been grafted onto the surface of PVC in sequence.
主要研究了环氧胶接接头在不同温度水中的老化行为，并用扫描电镜（SEM）和傅立叶红外光谱仪（FTIR）分析了其失效的机理。
The effect of temperature on the aging performance of epoxy bonded joint in water was researched, and its failure mechanism was analyzed by SEM and FTIR.
通过实时傅立叶红外光谱（FTIR）研究了杂化溶胶的凝胶固化过程。采用热重分析研究了杂化膜在氧气和氮气气氛下的热降解行为。
Real-time Fourier-transformed infrared spectroscopy (FTIR) was used to monitor the curing process of hybrid sol, indicating the formed imide group decreased with increasing titania content.
开展了改性前后煤表面的傅立叶红外光谱分析，结果证明，煤表面电磁改性具有时间效应，电磁场不能永久地改变煤的内部基团微观结构。
The FTIR analysis of surfaces of tested anthracites suggests that the induced modification is time dependent and can not permanently change the surface microstructure.
所得样品用扫描电镜(SEM)、傅立叶红外光谱(FT - IR)、X射线衍射(XRD)和热重分析(TG)等分析方法进行了表征。
The obtained samples were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA).
本文通过扫描电镜、等离子体光谱分析、热重分析、13c核磁共振波谱分析、傅立叶红外变换光谱分析，对它进行物质结构的鉴定和元素含量分析。
The structure identification and the element content analysis were investigated with scanning electron microscope, plasma spectral analysis, TG analysis, 13c NMR and FTIR spectral analysis.
利用傅立叶红外光谱（FTIR）和X射线光电子能谱（XPS）技术，分析桦木单板化学镀前预处理后，桦木表面官能团的变化和化学镀后元素的变化。
The variation of function group and element on it was analyzed in the pre-treated and plated process by FTIR and X-ray photoelectron spectroscopy(XPS) analysis technology.
采用傅立叶变换红外光谱、图像扫描和显微分析等手段，研究了静电复印废纸溶剂法脱墨的机理。
The mechanism of de-inking of photocopy waste paper with solvent treatment was investigated by Fourier transforming infrared spectrum (FT-IR), image-scanning and microscope analysis.
傅立叶变换红外(FTIR)光谱技术可以对空气、生物气以及各种工业生产过程中的排气、废气进行实时在线监测。
Fourier transform infrared spectroscopy (FTIR) can be used for the continuously on-line detection of the air, biotic gas and exit gas components in industry.
通过傅立叶变换的红外光谱（FTIR）、热重分析仪（TGA）证实疏水单体对凝胶进行了疏水改性。
The hydrophobic modification of gel with hydrophobic monomers was proved by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA).
并且分别利用原子力显微镜和傅立叶变换红外光谱对薄膜进行界面形态和微观结构分析。
The surface morphology and chemical structure of the film are characterized by Atomic Force Microscope (AFM) and Fourier Transform Infrared Spectroscope (FTIR).
傅立叶变换红外光谱(FTIR)表明，所获得的薄膜结构一致，均为六角氮化硼薄膜。
Fourier transform infrared spectroscopy (FTIR) indicates that all of films have the same structure of hexagonal construction.
用时间分辨-傅立叶变换红外发射光谱法研究了OH自由基与CO的反应。
The reaction of OH radical with co was investigated by time-resolved Fourier transform infrared (TR-FTIR) spectroscopy.
并采用傅立叶变换红外光谱分析仪（FTIR）分析了局部放电引起的硅橡胶表面结构的变化。
And the change of silicone rubber surface structure by the Fourier Transform Infrared Spectroscopy (FTIR) is analyzed.
用傅立叶转换红外光谱(FTIR)研究了NR、环氧化天然橡胶(enr)和氯化天然橡胶(CNR)的热老化行为。
The thermal aging behaviour of NR, ENR and CNR was studied by using Fourier Transform Infrared Spectroscopy (FTIR).
傅立叶变换红外光谱是快速无创分析物质分子结构的有效手段。
Fourier Transform Infrared (FTIR) spectrum is an effective method for investigating substance molecular structure swiftly while keeping the specimens intact.
用X光电子谱和傅立叶变换红外谱方法表征了制备的薄膜。
The synthesized films were characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy.
目的：用傅立叶变换红外光谱法对传统中药芡实进行鉴别。
OBJECTIVE: To differentiate Chinese traditional medicine semen euryales with Fourier transformation infrared spectrum.
用凝胶渗透色谱(GPC)、傅立叶变换红外光谱(FT - IR)和X射线衍射(XRD)对降解产物进行表征分析。
Gel permeation chromatography (GPC), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) were adopted to characterize and analyze the degraded products.
应用推荐