柴油机转速采样电路包括模拟信号电路和脉冲信号电路。
The diesel engine rotating speed sampling circuit comprises an analog signal circuit and a pulse signal circuit.
设计了一种由滤波器和迟滞比较器构成的传输频率信号电路。
This paper designs a circuit based on hysteresis comparator and filter which is used to transfer frequency signal.
本文提出了一种简单有效的、运用于模拟和混合信号电路的测试方法。
This paper presents a simple and efficient testing scheme for analog and mixed-signal circuits.
对于混合信号电路来说，导致性能下降的一个常见原因就是数字电路的噪声。
One of the most common causes of loss of performance in mixed signal systems is degradation of analog performance by noise from the digital parts of the system.
根据制作阵列的工艺过程和结构特点，提出了阵列和CMOS信号电路的集成方案。
Integration project of array with CMOS signal circuit was brought forward according to the fabrication process of plane-array sensor and its structure characters.
本文对MACHA爆炸机增加预备信号电路的改造设计、制做及现场试验作了介绍。
This article introduce modification designation on adding ARM signal circuit and the site test.
本文物理层接口电路是USB2.0接口芯片中的最关键的高速模拟与混合信号电路。
The transceiver interface circuit in this dissertation is the most important part of USB2.0 interface which is a high speed mixed signal circuit.
设计一个少油断路器调整用音响信号电路，以便提高调整工作的效率，并减轻劳动强度。
The sounder circuit is used to adjust oil-minimum breakers, so that the working efficiency can be raised and the labour intensity can be reduce.
在混合信号电路中，考虑到功耗和性能的要求，数字电路低电压工作而模拟电路高电压工作；
In mix signal circuits, digital circuits operate at a lower voltage and analog circuits at a higher one, so as to meet the requirement of power dissipation and performance.
文中介绍了PM8316的主要功能和接口，给出了它在SDH终端设备中的主要信号电路框图。
The primary functions and interfaces of PM8316are introduced in this paper, the circuit figures of the chief signals of PM8316in the SDH terminal equipment is also presented.
总之，在工艺尺寸按摩尔定律下降的背景下，低功耗已经成为设计混合信号电路非常棘手的问题。
In a word, according to the Moore's law for the device technology, low power issue has become the key point for hybrid signal circuits.
本实用新型由时基信号电路、数字钟电路，时间显示屏，半导体存贮器，编程电路及执行电路组成。
The utility model is composed of a time signal circuit, a digital clock circuit, a time display screen, a semiconductor memory, a programming circuit and an executing circuit.
目前，小信号电路计算机仿真技术趋于成熟，但大功率电路的计算机仿真优化设计技术仍然有着一系列问题需要解决。
In nowadays, the technology of simulating of small signal circuit becomes matured, but there are still a few problems of simulating large signal circuit.
针对集成电路测试中模拟和混合电路的测试问题，提出了一种基于小波分析的电流测试实现混合信号电路故障诊断的方法。
How to test the analogue and mixed-signal circuits has become very critical to the IC testing, a novel fault diagnosis method based on current testing is proposed for mixed-signal circuits.
RTD基集成电路所具有的超高速、低功耗和自锁存的特性，使其在数字电路、混合信号电路以及光电子系统中有着重要的应用。
RTD-based circuits have important applications in digital circuit, mixed signal circuit and optoelectronic system with the characteristics of ultra-high speed, low power and self-latching.
硅cmos工艺由于其高性能，高集成度，低功耗以及低成本等优点，已经在数字电路，混合信号电路，以及射频集成电路中被广泛应用。
CMOS technology on Silicon is widely used in digital circuit, mix-signal circuit, and rf circuits because of it's obvious advantages like high performance, high integration, low power, and low cost.
在电路原理图设计中遵循高速信号电路PCB设计原则，完成了系统PCB的布局、叠层设计、内电层设计、系统接地设计和高速信号线等设计；
With the circuit schematic design and the high speed PCB design, completes PCB composition, stackup design, internal layer design, system grounding design and high-speed signal line design.
针对混合信号电路的测试问题，提出了一种内建自测试(BIST)结构，分析并给出了如何利用该结构来计算片上高速模数转换器(adc)的静态参数。
Aiming at the mixed-signal circuit testing, an integrated built-in self test (BIST) architecture for testing on-chip high speed ADC was presented.
通过电路原理图设计和高速PCB 设计，完成了堆叠设计和高速信号线设计。
With the circuit schematic design and the high-speed PCB design, completes stackup design and high-speed signal line design.
为证明他的论点，他和他的同事试图建造一个像黏菌一样工作的电路，能够学习并预测未来的信号。
To prove his contention, he and his colleagues set about building a circuit that would, like the slime mould, learn and predict future signals.
该装置可以将高速信号处理，集成电路，光通信，超级计算和其它应用的未来具体化。
The device could shape the future of high-speed signal processing, integrated circuits, optical communications, supercomputing and other applications.
此次佳能通过改进读取电路的时序控制方法，成功实现了传感器信号的高速读出。
By modifying the method employed to control the readout circuit timing, Canon successfully achieved the high-speed readout of sensor signals.
对于相邻布线的信号来说，前端串扰在相对较长的平行布线时才会引起电路功能的失调。
For signals routed side-by-side, forward crosstalk requires extremely long parallel runs to couple enough energy to cause circuit malfunction.
虽然这项技术是用来采集人的心电信号的，但EPIC电位集成电路的开发商说它也可以很好的检测骨骼肌的电活动，包括控制眼睛的活动。
Though the technology is being introduced to pick up heart signals, EPIC's developers say it is also good at sensing the electrical activity of skeletal muscles, including those that control the eyes.
即使在非常小的线间距的情况下，在大于信号上升的距离5到6倍的距离以上串扰才会成为电路设计的一个问题。
Even with very tight conductor-to-conductor spacing, parallel runs of 5 to 6 times signal rise distance are required before crosstalk becomes a problem.
对于那些没有CSYNC信号的显卡来说，可以设计一个生成CSYNC信号的电路(请参阅参考资料)，但是通常购买一个具有这种信号的显卡更加容易。
You can build a circuit that generates a CSYNC signal for CARDS that don't do this already (see Resources), but it is generally easier to just purchase a card that already generates it.
对于那些没有CSYNC信号的显卡来说，可以设计一个生成CSYNC信号的电路(请参阅参考资料)，但是通常购买一个具有这种信号的显卡更加容易。
You can build a circuit that generates a CSYNC signal for CARDS that don't do this already (see Resources), but it is generally easier to just purchase a card that already generates it.
应用推荐