不过当一个非常大的细胞发出一个非常强的信号(好几十毫伏！)而且距离电路板1毫米以内的时候我们的设备还是可以抓到信号的。
But yes, when an extraordinarily large cell fired off a massive signal (many tens of millivolts!) within a millimeter of the plate, we could pick it up with our apparatus.
前端采集插头接收测试数据，切换继电器电路传递被测电路板信号。
Testing data is received with data acquisition plug, signal from tested circuit board is transferred by circuit of switch relay.
本文分析pcb印刷电路板信号接地设计中产生接地噪声及电磁幅射的原因和对策。
This text analyses that earth noise and electromagnetic reasons and countermeasures penetrated emerge in the printed circuit board signal earth design of PCB.
本文实现的电路板可对带宽达40m的信号进行平稳的放大并输出较平坦的信号波形。
The circuit designed in the thesis could output comparatively flat signal wave, and amply signals with bandwidth of high to 40m.
流量计采用单芯电缆完成对井下集流器、电路板供电，同时单芯电缆还完成两路流量信号、压力及温度信号的传输。
The flowmeter provides one core cable to supply power for the packer and downhole circuit of the flowmeter, at the same time, the signal transmit through the cable.
硬盘电路板把这些信号，转化为电压波动。
The hard drive circuits translate those signals into to voltage fluctuations.
系统硬件包括压力传感器平板阵、信号调理电路、信号采集板以及计算机系统。
The hardware of this system includes pressure transducer board array, signal modulation circuit, signal capture board and PC.
本文的研究内容是研制出适用于低频信号采集和实时处理的计算机扩展电路板，其应用对象是线性调频连续波雷达差拍信号的采集和实时处理。
The task of the design is to develop a computer extended circuit board, which is applied to the acquisition and processing of beat-signal in Linear FM-CW Radar(LFMCW).
为解决数字电路插板的测试问题，设计了80路逻辑信号发生器。
To settle the problem of testing logic card, we have designed an 80 channels logic generator.
基于数字信号处理(dsp)方案设计了一块电路板用于声致发光层析成像(SLT)的扫描成像系统。
Based on digital signal process (DSP), this article gave the design method of an electronic board, which is used in the scanning imaging system of sonoluminescence tomography (SLT).
在UPS行业，为了使测试员能快捷、方便的建立测试环境，需要有相应的UPS电路板测试平台，包括信号测量、动作执行、故障诊断、数据存储以及操作界面等。
In the UPS industry, in order to create the test environment for testers quickly and conveniently, it's necessary to have the test platform for UPS printed circuits boards.
第四，设计了检测板、信号中转板、485接口和USBHOST接口等电路。
Fourth, author designed test circuit board, signal transfer circuit board, 485 interface and USB HOST interface etc.
首先，通过射频信号接收电路板接收证券信息；
These products can receive not only common information but also stock information.
采用这种技术时，电路板的元件侧专用于接地层，信号走线则布设在焊接侧。
In this technique, the component side of the board is dedicated to the ground plane, and signal traces are placed on the solder side.
为保证信号和电源的完整性，需要对硬件的走线、过孔、电源等方面进行研究与设计，从而保证电路板的工作可靠性。
To guarantee the integrity of signal and power, the layout, through-holes and power in the hardware should be designed carefully to provide the high working reliability of the circuit board.
另外，芯片设置于软性承载器上，以通过信号线连接至显示面板与印刷电路板。
In addition, the chip is arranged on the flexible loader for connecting to the display panel and printed circuit board via signal lines.
硬件部分包括值班电路板、信号采集板和采集控制与数据存储板。
The hardware is consisted of on-duty circuit board, signal acquisition circuit board and acquisition control & data storage circuit board.
电路板至少需要4层才能实现最佳布局和性能：一个接地层、一个电源层和两个信号层。
Best layout and performance are achieved with at least a 4-layer multilayer board, where there is a ground plane layer, a power supply layer, and two signal layers.
该显示装置可包括安装在电路板上的信号处理器，该信号处理器处理被信号接收器接收到的信号。
The display apparatus may include a signal processor mounted on the circuit board, the signal processor processing signals received by the signal receiver.
基于Sigrity开发的电磁分析方面的专利技术，其软件工具提供快速和先进的可用于整块电路板和芯片封装的电源及信号完整性分析。
Based on proprietary and patented technologies, SIGRITY offers industry's unprecedented fast and advanced software tools capable for power and signal integrity analysis of entire PCBs and IC packages.
时钟等快速开关信号必须利用数字地屏蔽起来，以免向电路板上的其它器件辐射噪声，并且绝不应靠近基准输入。
Fast switching signals, such as clocks, must be shielded with digital ground to avoid radiating noise to other parts of the board, and must never be run near the reference inputs.
时钟等快速开关信号必须利用数字地屏蔽起来，以免向电路板上的其它器件辐射噪声，并且绝不应靠近基准输入。
Fast switching signals, such as clocks, must be shielded with digital ground to avoid radiating noise to other parts of the board, and must never be run near the reference inputs.
应用推荐