阵列中液晶的位置控制反射的光线的方向。
The alignment of the liquid crystals in the array controls the direction in which light is reflected from them.
该系统适用于角度或位置控制。
本文介绍了电机的电流、速度和位置控制。
This paper describes the control of the motor current, velocity and position.
以实现输入信号成比例的输出轴的位置控制。
And realize the proportional input signal of the output shaft's position control.
高速系统提供了卓越的试样图象和位置控制。
The high-speed system offers unparalleled sample imaging and position control.
设计了以DSP芯片作为控制核心的位置控制模块。
Design a position control module which USES DSP as the main chip.
而伺服刀架的核心技术就是伺服电机的位置控制技术。
And the key technology of the servo turret is the position control technology.
根据视觉跟踪特性采用了基于位置控制的闭环控制结构。
Based on the characteristic of vision tracking, it adopts the control architecture of closed loop based on position control.
第五间中对YNST控制软件和位置控制算法进行详细介绍。
In the fifth chapter, the YNST control software and positional PID arithmetic are introduced.
设计一种双位置闭环模糊控制器，用于多指灵巧手的位置控制。
A double closed loop fuzzy control scheme for multi fingered dexterous hand is presented.
在电弧熔炼中，提高电极位置控制的精度是一个十分重要的问题。
It is a problem of great importance to raise the control precision of electrode position in arc smelting.
提出的动力学补偿方法结合了闭环位置控制和计算力矩控制两者的优点。
The proposed dynamic compensation method combines the advantages of closed-loop position control and computed torque control.
此法已用于一带有典型驱动和反馈传感器的工业直流电机的位置控制之中。
The new scheme is implemented for position control of an industrial servo motor with typical drive and feedback sensing capabilities.
该基岩标较以往监测标志有重大改进，并兼有高程控制与平面位置控制的作用。
The bedrock bench marks have made a significant improvement and play role in both of height controlling and plane location controlling.
研究了内、外部方式控制、脉冲时序生成和驱动控制以及位置控制等控制方法。
The whole control algorithm is studied and divided into three parts including pulse-generation, step motor control and position control.
如有必要，必须提供确保仅能从一个或多个事先确定的区域或位置控制机械的方法。
If necessary, means must be provided to ensure that the machinery can be controlled only from control positions located in one or more predetermined zones or locations.
侧导板、夹送辊、卷筒的位置控制对整个卷取区至关重要，直接影响卷取成功与否。
The position control of side guider, pinch roll, and mandrel is very important for the whole coil area. It influences directly the success of coiling.
因此，本设计采用双通光栅单色仪加直接驱动直接读取光栅角位置控制的实现方案。
So, this project adopts the realization scheme of double-pass raster monochromator plus direct drive and direct reading of the raster's angle position to control.
为了实现磁力轴承系统中转子的位置控制，需要建立一个闭环的位置反馈控制系统。
In order to realize rotor position control in the magnetic bearing system, a closed loop position feedback control system is needed to be established.
尿酸位置控制及其相关的动态一直在进行研究，为工业机器人技术和数控机械的应用。
Urate position control and its related dynamics have been under research for industrial robotics and CNC machinery applications.
针对多指灵巧手钢缆传动系统的非线性，提出一种基于分散神经网络的位置控制方法。
A decentralized neural network based position control method is presented for multi-fingered dexterous hand with nonlinear tendon-drive system.
用这样种方法，把轨迹位置控制转变为运动规律控制，探讨理论轨迹控制的物理方法。
In this way, the position control is changed into physical motion control, and it is a physical method to carry out theoretical trajectory.
提出了伺服阀的位置控制和颤振的控制关系上采用可切换的双通道控制形式的设计思想。
In dealing with the relationship of the servo valve position control and the adaptive control, the Double-loop control is adopted.
通过实验验证了控制方案的正确性，为机器人手指关节的位置控制提供了一种有效方法。
The correctness of this method is verified by experiment. A valid scheme for robotic hand joint position control is provided.
重点拟定和分析了切头和定尺剪切的长度给定环节、速度给定环节、位置控制和切换环节。
The length-given link, velocity-given link, position control and change-over link of cutting head and fixed length cutting have been emphatically analyzed and worked out.
运动控制是通过软硬件的方法来实现机械运动精确的位置控制、速度控制和加速度控制等。
It's based on the combination of software and hardware that motion control realizes the good precision of position control and speed control in machine motion.
采用伺服驱动器的速度控制和位置控制相结合的方法实现天车定位和吊臂运动的精确控制。
The combination of speed control and location control of servo driver realized the accurate control of crane's location and steeve's movement.
作为一种高性能异步电动机传动，精确的转矩转速和位置控制对于高速电主轴来说是必需的。
As a high performance ac asynchronous motor drive system, accurate torque and position control is necessary for high-speed motorized spindle.
研究在保证中板轧机电动APC(自动位置控制)系统定位速度的同时提高定位精度的方法。
Investigates a method for increasing the positioning accuracy of electric APC (auto position control) system for plate mill while assuring its positioning speed.
研究在保证中板轧机电动APC(自动位置控制)系统定位速度的同时提高定位精度的方法。
Investigates a method for increasing the positioning accuracy of electric APC (auto position control) system for plate mill while assuring its positioning speed.
应用推荐