介绍在刚性连接方式下，用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件，给出了该系统的实验结果。
Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.
电机和伺服互换性，是指在实际生产中，某台电机或者伺服坏了之后，是否可以用相对不重要的电机或者伺服替换的容易程度。
The exchange of motor and servo means that once one motor or servo doesn't work, it possible to be replaced by other less important motor or servo.
温度传感器，启动开关s1的，和电流控制电位器都连接到局用伺服引线(可在许多商店的嗜好，在10英尺长度)。
The temperature sensors, start switch S1, and current control potentiometer are all connected to the board using servo lead wire (available at many hobby shops in 10 foot lengths).
本论文以超精密机床用永磁同步直线电机驱动进给伺服系统位置控制器为研究对象。
In this paper, the research object is the position controller of a permanent magnet linear motor direct drive feed servo system.
现在我们来研究用十字夹头位移或位移夹头伺服控制来完成相同的试验。
Consider now the same test carried out with servo control based on crosshead travel or displacement of the grips.
混合式步进电动机伺服系统转子的位置检测，可以用传统的外配位置传感器或基于理论算法的无位置传感器方案，但是存在许多问题。
Position detection of rotor in hybrid stepping motor servo system can use traditional outside position sensor or sensorless scheme based on theoretical algorism, but there are many problems produced.
本文介绍了阀门定位用机液伺服系统的工作原理及常见故障。
The paper introduces the principle and fault of the mechanical - hydraulic servo system on locating the valve.
本文提出了用多变量CAR时序模型来辨识电液伺服系统的阶和参数。
This paper proposes the order and parameter identification of electro-hydraulic servo system by multi-variable time series CAR.
用基于图象的视觉伺服方法来预测特征点在图象平面的运动轨迹。
Trajectories of feature points on image plane were predicted by image-based visual servo method.
他们可能要你用文本编辑，然后上传，或是要你用微微的编辑、创建或编辑档案伺服器。
They may want you to use a text editor and then upload it, or they may want you to use a PICO editor and create or edit the file on the server.
目前用开关阀实现的气动伺服控制已成为流体动力控制领域竞相研究的对象。
At present, the pneumatic servo control using on-off valves has become a subject researched on competitively in the domain of fluid power control.
提出了一种用80c 196MC单片机控制的交流伺服系统设计方案。
A design strategy for 80c196mc - based AC. servo system is described.
实验结果表明，用高速开关阀可以实现快速、精确的气动执行器位置伺服控制。
The experimental results show that the pneumatic actuator position servo system can be implemented using high-speed switching valves fast and accurately.
介绍一种针对正、余弦旋转变压器数字转换器（RDC）模块，用复杂可编程逻辑器件（CPLD）技术实现伺服轴角编码电路设计的方案。
This paper introduces the technology scheme to design radar servo shaft encoder circuit by using CPLD on the rotary transformer and RDC module.
用伺服电机取代原机械头驱动飞梭机布框。
The original machine head was replaced with servo motor to drive the cloth frame.
对数控机床直线伺服系统IP控制器提出用鲁棒控制理论进行设计的新方法。
A new method of IP robust controller design for NC machine tool droved by linear servo system was presented based on robust control theory.
用这种学习算法建立某伺服机构的模型，并构造基于模型的故障诊断系统，通过实验取得了较好的结果。
Furthermore, the experiment using the learning algorithm to model a servo-mechanism and to construct the fault diagnosis system based on the model is carried out, the results is very good.
介绍新提出的用变转速液压泵闭环控制的差动缸电液伺服系统。
The electro-hydraulic servo system directly controlled with speed variable pumps is a competitive and environmental beneficial driving principle.
主要分析了用模糊自适应PI控制构成永磁同步电机交流伺服系统的位置环。
The position control loop composed of self-adjusting PI control based on Fuzzy inferences in AC servo system of permanent magnet synchronous motor was discussed emphaticaly in this paper.
针对舰船柴油机的振动隔离问题，本文对液压伺服隔振系统反馈控制理论进行了研究，建立了双层隔振系统的理论模型，用传递函数分析法推导出系统力传递率。
As far as the issue of vibration isolating of ship, this paper studies the feedback control theory of hydraulic servo isolation mounting and sets up the theory model of two_stage isolation mounting.
在分析了船用舵机电液伺服单元的基本原理和数学模型的基础上，设计了单神经元自适应PID控制器。
By analyzing the basic principle and mathematics model of an electro-hydraulic servo unit for ship rudder, this paper designs a single neuron adaptive PID controller.
如果你一定要用个伺服器，用一个除了商业关系之外你可以信任的伺服器。
If you must use a server, use a server whose operators give you a basis for trust beyond a mere commercial relationship.
如果方法是因为任何其他原因而呼叫，则会叫用基底方法，以引发伺服器的回传事件。
If the method is being called for any other reason, then the base method is invoked to raise a postback event to the server.
电液控制单元是船用舵机电液位置伺服系统关键部件，其性能的优劣直接影响舵机的性能。
Electrohydraulic control unit whose performance has direct effect on rudder's characteristics is the key component of ship rudder position control system.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
该系统用直线电机，在计算机的控制下，刀具进给伺服机构响应速度快，定位精度高，能高速、高精度地加工工件。
In this system, linear motor is applied, and under the control of computer, fast response of servo drive for tool feed, high positioning accuracy and high precision workpiece are achieved.
某些高级应用，如轿车用板带材生产线的压下控制等，对伺服性能提出了更加严格的要求。
Some advanced application, such as the product line of iron strip used for cars, requires more excellent response characteristic of hydraulic servo-system.
这样用钕铁硼代替铝镍钴就缩小了力矩马达的体积，也就可以缩小了伺服阀的体积，减少质量，节约了成本。
So instead of using Nd-Fe-B Alnico motor to reduce the size of the torque, but also on reducing the size of the servo valve, a reduction of quality, cost savings.
在此介绍用中断拦截的方式实现对步进伺服电机的变频控制。
It will be introduced to control the frequency of Stepper Servomotor by the Way of the Interrupted Interception.
在此介绍用中断拦截的方式实现对步进伺服电机的变频控制。
It will be introduced to control the frequency of Stepper Servomotor by the Way of the Interrupted Interception.
应用推荐