基于伺服电机直接驱动的折弯机数控技术则是一门新兴的技术。
Based on direct drive servo motor CNC bending machine technology is an emerging technology.
介绍在刚性连接方式下，用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件，给出了该系统的实验结果。
Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.
修复机器人六个关节均选用交流伺服电机驱动。
The six joints of the repairing robot are all driven by AC servo motors.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
精通PLC编程（西门子、三菱），人机接口触摸屏、变频器、伺服驱动器、步进电机。
Proficient in PLC programming (Siemens), human-machine interface touch screen, frequency converter, servo driver, stepper motor.
同时采用交流伺服电机作为驱动元件，基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
本论文以超精密机床用永磁同步直线电机驱动进给伺服系统位置控制器为研究对象。
In this paper, the research object is the position controller of a permanent magnet linear motor direct drive feed servo system.
存在与蜗轮传动的运动学已经被证明是快速的双向旋转的理想建成，旋转轴是通过伺服电机驱动，齿轮。
There are built with a worm gear drive which has proven to be kinematically ideal for fast bi-directional rotation, Rotary axis is driven with gears via Servo motors.
再用电机伺服驱动系统控制天线转动，调整其重新指向卫星接收信号。
The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.
人机界面，可编程控制、气动、伺服电机驱动，先进的杀菌与无菌保障。
Man-machine inter-facial can program logic control, pneumatic, servo motor drive, advanced sterilizing and asepsis keeping.
电机现代控制技术是伺服驱动系统的核心，也是现代制造装备最具代表性的先进标志之一。
The modern control technology for motor is not only the core of servo drive systems, but is one of the most typical symbols of modern manufacturing equipments.
本文介绍了一种采用微型直流伺服电机驱动的仿生机器蟹步行腿设计及其运动学、动力学分析。
The paper presents the design of walking leg for bionics crab-liked robot, which is driving with micro servo motor.
我们公司的大型的滚筒给料机是一款高性能设备，该设备由伺服电机驱动，装有一个气动的辊筒用于处理更宽，更重的材料。
Our large roll feeder is a high performance servo motor driven model with a pneumatically pre - loaded idler roller for handling wider, heavier materials.
用伺服电机取代原机械头驱动飞梭机布框。
The original machine head was replaced with servo motor to drive the cloth frame.
本文分别用PI控制器和IP控制器对直流伺服电机模型建立PWM驱动数字型调速系统。
The numeral timing systems driven by PWM are set up for the direct current servo motor model by using the PI. and IP contrail ers respectively.
介绍直流伺服电机的驱动电源，分析其各种技术，指出了发展趋势。
Drive power of direct current servo motor is be introduced, all kinds of its technology are analyzed, development is pointed out.
研究了方波电流驱动的永磁无刷电机交流伺服系统。
This paper deals with an AC servo system with permanent magnetic brushless motor driven by square wave current.
为实现光学精密调整，研制出了由交流伺服电机驱动的6-HTRT并联机器人，它具有6个自由度，其结构特点决定了该机器人可以完成高精度定位调整。
To accomplish a task of optical precision adjustment, a 6-DOF precise parallel robot with architecture of HTRT is presented, which is driven by AC servo motors.
利用PWM驱动方式控制电机的转动，并设计出了直流伺服控制系统硬件电路图。
Using PWM to drive motor, and we design a circuit in DC serve control system.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法，并以西门子伺服驱动放大器和交流伺服电机作为驱动单元，对改造后的数控铣床各轴进行位置控制。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
进给传动：三向进给均采用交流伺服电机驱动精密滚珠丝杆，专用丝杆轴承支承，提高了机床的进给运动刚性和精度。
Feed transmission: using AC servo motor to drive the precise ball screw sets that supported by special ball screw bearing, which improves the rigidity and precision of feed movement.
分析了以直线电机直接驱动下的高频响伺服刀架为核心的非圆截面加工系统的控制结构；
The paper presents the control structure of a non_circular machining system which is based on linear motor direct feed drive.
设置运动控制卡中的参数，通过控制卡发出的脉冲与方向信号来驱动伺服电机。
By the parameters, the pulses and the direction signals of the control card, the servo motor is drived.
系列的线性轴电机是一款无刷的，直驱动伺服电机，由磁轴和运动线圈组成，运动线圈控制电流量。
S series Linear Shaft Motor is a brushless direct drive tubular linear servomotor consisting of just a magnetic shaft and a moving coil assembly (forcer) which is controlled by the flow of current.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the use of impulsive control mode, the drive and motor closed loop, but not feedback to the numerical control system, this drive, in a sense, can open loop control called the servo control.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
应用推荐