您会发现解决这些问题后，您的Web服务应用程序优化工作变得容易得多。
You will find that resolving the issues makes your job of optimizing Web services applications much easier.
一次只尝试放松每个边界约束一个单位，解决修改后的问题，看一下目标函数的优化值发生了什么变化。
Try relaxing the value of each bounded constraint one at a time, solve the modified problem, and see what happens to the optimal value of the objective function.
因此，对水平井压裂后的试井和产能评价，以及压裂水平井的裂缝参数优化是一个十分重要的问题。
Hence, it is a very important problem to perform well test, evaluate the deliverability of the fractured horizontal well, and optimize the fracture parameters.
阐述最优化问题。在对设计空间进行一些初始抽样后，选择并应用一种合适的最优化技术。
Formulate the optimization problem. Select and apply an appropriate optimization technique after some initial sampling of the design space.
现代自动分拣系统广泛采用先分区拣选后订单合流的分拣策略，其中存在着订单排序优化问题。
The modern automated sorting systems widely adopt the strategy of zone picking and order accumulation, where the or-der arrangement optimization problem exists.
针对圆形烟道流速监测点布置存在的问题，用流体力学理论进行分析、优化，在确定采样断面后，在距采样孔0。
In view of problems existing in velocity of flow monitoring points collocation in circular flue, using hydrodynamics theory to analyze and optimize, one monitoring point at 0.
大庆至铁岭双线输油管道已进行了大规模的技术改造，对改造后的运行提出了最优化问题。
Optimization problem in operation has been put forward for Daqing-Tieling oil loop pipeline which undertook large-scaled technical transformation.
结果显示：与原全钢轴承比较，优化后混合轴承消除了原全钢轴承存在的控制类型“阶跃”问题，在精度寿命指标上具有明显的优势。
The results demonstrated that the current hybrid bearing has solved the "jump" problem of control type which existed in the previous one, and has an obvious advantage in precision lifetime.
实施后，解决了连轧孔型系统设计、优化数模运算等相关问题，提高了芯棒利用率。
The relative problems such as designing continuous rolling pass system and optimizing mathematical model operation are solved after practice and utilization rate of the mandrel is increased.
对操作参数进行优化调整后，大幅度改善了吹膜工艺中存在的薄膜褶皱多的问题。
The problem of crease in the inflation film process was improved significantly by adjusting the operation parameters.
本文针对连铸提高拉速后，如何改善工艺操作，优化工艺参数，提高或解决因拉速提高后引起的铸坯质量问题。
Some measures are suggested to improve operation, optimize technological parameters for solving some strand quality problems caused by increased casting speed.
针对分布式电源准入容量计算的问题，提出了考虑电压调整约束后的准入功率优化计算模型。
An optimization method is proposed for computing the maximum penetration level of multiple distributed generators, taking into account voltage regulation constraints.
针对项目粗细规划后得到的一系列任务群，论文研究了面向角色和团队的设计任务优化配置问题。
Then, the dissertation studies a planning optimization problem for design tasks supporting teams and roles according to the task groups produced after project planning.
由于采用的先验函数是非凸的并包含超验参数，一般的优化方法难以处理，采用动态后验模拟的方法可以很好地解决这些问题。
Due to the non-convex of the prior function and hyper-parameters, we use the dynamic posterior simulation rather than the general optimization methods to get reconstruction image.
通过DMC64 V机床加工的实践证明，驱动优化后的机床运行稳定，大大减少和消除了加工中的表面过切、表面麻点问题。
The cutting test on machine DMC64V with the optimized drive proved that the machine could work more stable and almost eliminate the problems such as rough surface and overshot point surface.
介绍了原有成品储存运输系统存在问题以及优化后的配置和特点。
Original problems in sinter storage and transportation system are introduced, the configuration and features of optimized system concluded.
分析了图像小波变换后小波系数的特征，讨论了优化小波系数的小波基选择问题。
Have analyzed properties of wavelet coefficients obtained from an image through wavelet transform, and discussed how to select wavelet basis to optimize wavelet coefficients.
本文计论了计算机源生的全息光学元件（COHOE）的合成及优化设计问题，文后给出了一个实际的结果，得到了特殊曲面的波面。
This paper discusses the composition and optimum design of the computer originated holographic optical elements (COHOE). The preliminary experimental result with a special wavefront is presented.
转化后的问题要求其乘子是非负的，故其KKT条件与一般的等式约束优化问题不同。
Therefore, its KKT conditions are different from those of the general equality constrained optimization problem.
文中系统地研究了大停电事故后，输电系统的重构优化问题。
The problem of the reconstructing transmission network after blackout is thoroughly studied in the paper.
根据此问题的特殊性，采用改进后的0.618法进行优化计算。
According to the problem characterises, the improving 0.618 method has been used.
同时针对转子铸铜后，电机起动力矩降低的问题，提出了优化转子槽面积、增加PTC等解决办法。
A solution was given to improve the starting torque by the optimal design of rotor slot and using the PTC.
介绍了板、带材压下规程及型材的孔型优化设计问题，并指出了设计特点与方法，给出了优化后的效果。为钢材及其它有色金属轧制规程的设计提供了设计方法。
The optimization design for pass of shape steel and draughting regulations for plate and strip is introduced, design features and methods offered, the effect of optimization also given.
在分析嵌套移动网络次优化路由问题后，提出路由优化方案ROPIO。
New route optimization solution called ROPIO is proposed to solve suboptimal routing problem caused by nested mobile networks.
文中的的算例表明移频与逆迭代法结合后对频率约束的动力拓扑优化问题非常有效。
The example in the paper shows the efficiency of shift frequency together with inverse iteration to perform the dynamic topology optimization with frequency constrain.
文中的的算例表明移频与逆迭代法结合后对频率约束的动力拓扑优化问题非常有效。
The example in the paper shows the efficiency of shift frequency together with inverse iteration to perform the dynamic topology optimization with frequency constrain.
应用推荐