SUA运行于基于Windows的服务器之上，但并不是以仿真方式实现，相反它提供的是原生的UNIX性能，并允许UNIX应用充分利用Windows的API和组件。
SUA runs on Windows-based servers without any emulation, providing for native UNIX performance and enabling UNIX applications to leverage Windows APIs and components.
机器—或平台—仿真可以以几种方式实现，其中有一种流行的开源包可支持许多hypervisor，被称作QEMU。
Machine - or platform - emulation can be performed in a number of ways, but a popular open source package that supports a number of hypervisors is called QEMU.
对所提出的触发rsd方式的脉冲电源设计方法进行了试验验证分析和仿真验证分析，证明了设计方法的正确性。
Design methods that the pulsed supply with means triggering RSD is mentioned are verified and analyzed by experiment and simulation. The correctness of design methods are proved.
另外，论文所建立的三峡电力系统的仿真模型对未来三峡电力系统运行方式以及可能存在的问题的进一步深入分析奠定了基础。
On the other hand, the constructed simulation models of Three Gorges power system lays foundation for father analysis of operation modes and possible problems of future Three Gorges power system.
仿真结果表明，采用5位数控方式调谐电容阵列，调谐时间误差不超过三个时钟周期，满足系统要求。
Simulation results showed that, with 5 CNC mode tuning capacitor arrays, the tuning time error was no more than three clock cycles, which meets requirements of the system.
仿真结果表明，如果各种运输方式的相对资源优势比较明显，就存在互利共生的可能性，并存在一个最优的合作水平。
The simulation results showed that, if the relative (resource) advantage of various transportation modes was evident, there existed the possibilities of mutualism and an optimum cooperation level.
针对电子膨胀阀步进电机驱动方式和本文的仿真结果，应用增量式PID和模糊控制方法进行实验分析。
PID and Fuzzy controllers are using in the experimentation based on the simulation results of the PID, fuzzy and fuzzy self-tuning PID controllers and the driven method for EEV.
通过对甘肃酒泉大规模风电基地实际运行方式的仿真计算分析，验证了措施的有效性。
With the help of simulating calculation and analysis on the wind and power base of Gansu Jiuquan Million Kilowatts wind Farm, we have verified the effectiveness of the proposed measures.
采用代码驱动的方式，开发出基于多线程技术的数控加工过程仿真模块，能够对数控程序进行二维和三维加工的动态仿真。
The simulation module which used multithreading technology is developed. By using the code driving method, the processes of CNC turning can be simulated.
电网仿真系统可用作电力系统的调度培训和安全分析，以及用于电力系统运行方式的研究。
Power network simulating system can be used in the dispatching training, safe analysis of the power network and the study of the operating mode for power system.
三机系统中的数字仿真结果表明，所训练出的NNOEC能够适应系统运行方式的大范围变化，在大小扰动下均表现出良好的控制性能。
The simulation results in a three-machine power system are show that the designed NNOEC can provide good control performance under various operating points and different disturbances.
文中针对使用燃料压力调节供应方式的热动力系统，建立了包括充填集液腔和喷嘴阀杆运动等启动过程动态仿真模型；
A dynamic simulation model of start-up process including fuel pumped section and the dynamic nozzle valve lever, etc. is established for the torpedo thermal power system with pressure adjustment mode.
仿真结果表明该方案能有效提高组网的效率和性能，同时对节点的群移动方式提供了良好的支持。
Simulation results demonstrate that the scheme improves the efficiency and performance of the organization of heterogeneous Ad hoc networks and supports nodes' group mobility well.
采用编程仿真的方式，对单级电路和多级电路分析后，提出了晶闸管开关最佳接入时刻为被短接电容电压为零时；
By programming simulation, the single-grade and multi-grade circuits are analyzed, and it is the best moment for thyristor to switch on when the voltage of capacitor to be shorted is zero.
计算机仿真结果表明，此方案不但使系统对参数的敏感性达到了非同步方式的水平，而且具有很好的相关性。
The experimental results show that, the scheme not only makes, the sensitivity to parameters of the system reach the level of asynchronous method, but also has good correlation property.
虚拟仿真培训功能的设计与实现，不仅克服了传统的场地培训方式带来的缺点，而且提高了培训的逼真性。
The design and the implementation of virtual simulation training system overcomes the deficiency of traditional on-site training system, at the same time, improves the vivid of training system.
详细研究了不同机动方式对机载武器捷联惯导系统传递对准性能的影响，并对计算机仿真结果进行了深入的分析。
Detailed investigation of different maneuver manners effect on the performance of SINS transfer alignment and in-depth analysis of the simulation outcomes were carried out.
为了充分发挥仿真在MEMS设计中的作用，把协同设计的思想引入MEMS仿真中，提出了协同仿真的设计方式。
To enhance the effect of simulation on MEMS design, this paper introduces a collaborative design into MEMS design and proposes the collaborative simulation of MEMS.
以多进制相位调制方式采用这种波形结构进行了仿真实验和湖水试验，都获得了比传统的波形结构更低的误码率。
Emulate experiments and lake experiment obtained lower error code rate than traditional waveform design method using this waveform structure with multiple phase shift key modulation.
分布式仿真系统可采用的联接方式主要有物理共享内存总线、消息传递网络和复制共享内存网络三种。
Physical Shared memory bus, message translating LAN and copy Shared memory network are the main interconnecting technology using in distributed real-time simulation.
仿真结果表明，该策略与传统方式相比能够更灵活有效的配置无线多媒体DS CDMA系统中的无线资源，其性能提高是显著的。
Simulation results show that our algorithm is flexible and efficient for mobile multimedia DS-CDMA systems, and the improvement of performance is significant.
结合液压传动实验台，通过实操的方式参与到液压传动回路设计和仿真的整个过程，激发学生的学习兴趣，提高学习效果。
Students use this software to design and to simulate fluid drive circuit, which will greatly inspire their learning interests and improve their learning effects.
对相同的路口进行定时控制设计。借助VISSIM仿真软件，分别对其定时控制方式和感应控制方式进行仿真和分析。
Carries on timing control at the same crossings, and based on the VISSIM emulational software, simulates and analyzes the way of timing control and actuated control.
仿真表明，与固定点线性最优励磁控制方式相比，非线性励磁控制方式具有更好的稳定性和动态品质。
Simulation results show that the nonlinear excitation controller law has better stability and dynamic performance than the linear optimum excitation controller law.
通过两区域互联电网仿真实验，同其他频率偏差系数的设定方式进行了分析和比较，其结果表明了该方法的优越性。
Compared with other bias Settings in two-area interconnected power system model, the simulative results indicate the superiority of the proposed technique.
本文通过理论分析和软件数值仿真，分析了蝶形结构、折合偶极子结构以及双馈方式实现方向图可重构的可行性。
Through theoretical analysis and numerical simulation, the pattern reconfigurable feasibility of the structures of butterfly, folded dipole and double-feed is analyzed.
利用MATLAB搭建了高压异步电动机软起动控制的仿真模型，对限流和电压斜坡软起动控制方式分别进行仿真。
The simulation model of high voltage induction motors soft starting control is created by MATLAB. The soft starting control model of the current-limit start and the voltage-slope start are simulated.
对串联谐振逆变电路的几种调功方式进行数学分析和仿真研究，比较它们之间的优缺点，结合分析的结果确定调功方式。
Then with the help of the mathematical analysis of the modulation methods in the series resonance circuit and the simulation results, a suited modulation method is chosen.
结合对仿真信号及实际转子系统振动信号的异常检测，对该算法的加窗方式及匹配阈值进行了分析。
The algorithm was used to detect simulated signals as well as actual vibration signals from a rotor system with various sampling Windows matching thresholds.
并运用MATLAB仿真工具，针对锅炉水位和汽压调节对象仿真模型在不同的蒸汽负荷、不同给水量、不同燃油量和不同控制方式下的动、静态情况进行仿真研究。
The response was compared with that obtained through simulation realized by the use of MATLAB and the actual process on different steam flow, feed water flow, fuel flow and control method.
应用推荐